Sony KDL-40V5500 ユーザーマニュアル

カテゴリー
液晶テレビ
タイプ
ユーザーマニュアル

このマニュアルも適しています

© 2009 Sony Corporation 4-131-484-13(1)
KDL-52V5500
KDL-40V5500
KDL-37S5500
KDL-32S5500
KDL-26S5500
KDL-22S5700
LCD Digital Colour TV
Operating Instructions
GB
CT
操作手冊
2
GB
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
~
The illustrations in this manual are of the
KDL-40V5500 unless otherwise stated.
Trademark information
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
DLNA and DLNA CERTIFIED are
trademarks and/or service marks of Digital
Living Network Alliance.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
“BRAVIA” and are
trademarks of Sony Corporation.
“XMB” and “xross media bar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
The typefaces used on the screen display
are solely developed by DynaComware.
This television is designed for
use in Hong Kong and ensured
the usage in Hong Kong only.
3
GB
Table of Contents
Start-up Guide 4
Safety Information ............................................................................................................................8
Precautions .......................................................................................................................................9
Remote and TV Controls/Indicators..............................................................................................10
Watching TV
Watching TV ....................................................................................................................................15
Using the Digital Electronic Programme Guide (EPG) (for digital channels only) ..................17
Using the Favourite List ................................................................................................................18
Using Optional Equipment
Connecting Optional Equipment ..................................................................................................19
Viewing Pictures from Connected Equipment .............................................................................22
Playing back Photo/Music/Video via USB ....................................................................................23
Using BRAVIA Sync with Control for HDMI..................................................................................25
Using Home Network Features
Connecting to the Network ............................................................................................................26
Enjoying Photo/Music/Video Files via the Network.....................................................................26
Checking the Network Connection................................................................................................27
Adjusting the Server Display Settings..........................................................................................28
Using Menu Functions
Navigating through TV Home Menu on XMB™ ............................................................................29
TV Settings Menu............................................................................................................................30
Additional Information
Installing the Accessories (Wall-Mount Bracket).........................................................................41
Specifications..................................................................................................................................45
Troubleshooting..............................................................................................................................47
Before operating the TV, please read “Safety Information” (page 8). Retain this manual for future reference.
GB
4
GB
Start-up Guide
Before Use
To check the accessories
Mains lead/AC power cord (1) (KDL-52V5500/
40V5500 only)
Cable holder (1) (KDL-52V5500/40V5500 only)
Stand (1) and screws (4) (KDL-40V5500/37S5500/
32S5500/26S5500 only)
Carrying handle (1) and screws (4) (KDL-22S5700
only)
RM-GD007 Remote (1) (KDL-52V5500/40V5500/
37S5500/32S5500/26S5500 only)
RM-GD007W Remote (1) (KDL-22S5700 only)
Size AA batteries (R6 type) (2)
To insert batteries into the remote
1: Attaching the stand (for
KDL-40V5500/37S5500/
32S5500/26S5500)
1 Open the carton box and take out the stand
and the screws.
2 Place the TV set on the stand. Take care
not to interfere with cables.
3 Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m (15 kgf·cm).
Push and lift the cover to open.
5
GB
Start-up Guide
Attaching the carrying handle (for KDL-
22S5700)
1 Place the TV with its screen facing down
on a stable cloth-covered work surface.
2 Place the carrying handle onto the TV as
shown.
Fit the protrusion on the rear of the
carrying handle into the guidance holes on
the rear of the TV.
3 Attach the carrying handle to the TV
securely using the supplied screws.
~
• When transporting the TV set, hold the carrying
handle as shown A.
• If not using the carrying handle to transport the
TV set, hold it as shown B.
2: Connecting an aerial/
antenna/cable/VCR
Connecting an aerial/antenna/cable
Connecting an aerial/antenna/cable and
VCR
The rear side of the
carrying handle
Protrusion
Guidance
hole
Soft cloth
Screw (+PSW 4 ×
12) for the carrying
handle
AB
Aerial/Antenna cable
(not supplied)
Aerial/Antenna cable
(not supplied)
Aerial/
Antenna
cable
(not
supplied)
AV cable
(not
supplied)
VCR
S-Video
cable
(not
supplied)
Aerial/
Antenna
cable (not
supplied)
6
GB
3: Preventing the TV from
toppling over
1 Install a wood screw (4 mm in diameter,
not supplied) in the TV stand.
2 Install a machine screw (M4 × 20, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
z
An optional Sony support belt kit is used to secure
the TV. Contact your nearest Sony service centre
to purchase a kit. Have your TV model name
ready for reference.
4: Bundling the cables
~
• Do not bundle the mains lead/AC power cord
together with other cables.
• The illustration may differ from that of the actual
rear panel, and the mains lead/AC power cord may
already be connected, depending on the screen
size.
KDL-52V5500/
40V5500
7
GB
Start-up Guide
5: Performing the initial
set-up
~
You can also tune channels manually (page 39).
Adjusting the viewing angle
of the TV (for KDL-52V5500/
40V5500)
This TV can be adjusted within the angles
shown below.
Adjust the angle left and right (swivel)
Detaching the Table-Top
Stand from the TV
~
Remove the screws guided by the arrow marks
of the TV.
Do not remove the Table-Top Stand for any reason
other than listed below.
To wall-mount the TV.
To put the TV in the carton at time of purchase
(except for KDL-52V5500/22S5700).
If you have attached the carrying handle, you need
to remove the carrying handle to wall-mount the
TV (KDL-22S5700 only).
3
Follow the instructions on the screen.
Programme Sorting: If you want to
change the order of analogue channels,
follow the steps in “Programme Sorting”
(page 37).
Eco Preset: When you select “Yes,” the
“Eco” settings are changed into
recommended values to reduce power
consumption.
Top view
Front
KDL-52V5500/40V5500/37S5500/32S5500/
26S5500
KDL-22S5700
Soft cloth
Screw (+PSW 4 × 12) for
the carrying handle
Screw (+PSW 4 ×
16) for the Table-
Top Stand
8
GB
Safety
Information
Installation/Set-up
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installation
The TV set should be installed near an
easily accessible AC power outlet.
Place the TV set on a stable, level surface
to avoid it from falling down and cause
personal injury or damage to the TV.
Only qualified service personnel should
carry out wall installations.
For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
KDL-52V5500/40V5500/37S5500/
32S5500:
Wall-mount bracket SU-WL500/
WL50B
KDL-26S5500/22S5700:
Wall-mount bracket SU-WL100
Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
Transporting
Before
transporting the
TV set, disconnect
all cables.
Two or three
people are needed
to transport a large
TV set.
When transporting
the TV set by hand,
hold it as shown on
the right. Do not
put stress on the
LCD panel and the
frame around the
screen.
When lifting or
moving the TV set,
hold it firmly from
the bottom.
When transporting
the TV set, do not
subject it to jolts or
excessive
vibration.
When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
Ventilation
Never cover the ventilation holes or
insert anything in the cabinet.
Leave space around the TV set as shown
below.
It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Installed on the wall
Installed with stand
To ensure proper ventilation and prevent
the collection of dirt or dust:
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a
cloth, such as curtains, or items
such as newspapers, etc.
Do not install the TV set as shown
below.
AC power cord
Handle the AC power cord and outlet as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
Use only Sony supplied AC power
cords, not those of other brands.
Insert the plug fully into the AC power
outlet.
Operate the TV set on a 220–240 V AC
supply only.
When wiring cables, be sure to unplug
the AC power cord for your safety and
take care not to catch your feet on the
cables.
Disconnect the AC power cord from
the AC power outlet before working on
or moving the TV set.
Keep the AC power cord away from
heat sources.
Unplug the AC power plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Notes
Do not use the supplied AC power cord
on any other equipment.
Do not pinch, bend, or twist the AC
power cord excessively. The core
conductors may be exposed or broken.
Do not modify the AC power cord.
Do not put anything heavy on the AC
power cord.
Do not pull on the AC power cord itself
when disconnecting the AC power cord.
Do not connect too many appliances to
the same AC power outlet.
Do not use a poor fitting AC power
outlet.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Mounting Hook
Hook attachment on rear
of TV set
Screw (supplied with the
Wall-mount bracket)
8 mm - 12 mm
KDL-26S5500/
22S5700
KDL-37S5500/
32S5500
KDL-52V5500/
40V5500
KDL-52V5500/40V5500
KDL-37S5500/32S5500
30 cm
10 cm 10 cm
10 cm
Leave at least this space around
the set.
30 cm
10 cm
6 cm
Leave at least this space around
the set.
10 cm
Air circulation is blocked.
Wall Wall
9
GB
Environment:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the TV.
Situation:
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from AC power
outlet and antenna during lightning storms.
Broken pieces:
Do not throw anything at the TV set. The
screen glass may break by the impact and
cause serious injury.
If the surface of the TV set cracks, do not
touch it until you have unplugged the AC
power cord. Otherwise electric shock
may result.
When not in use
If you will not be using the TV set for
several days, the TV set should be
disconnected from the AC power for
environmental and safety reasons.
As the TV set is not disconnected from
the AC power when the TV set is just
turned off, pull the plug from the AC
power outlet to disconnect the TV set
completely.
However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
For children
Do not allow children to climb on the TV
set.
Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
If the following problems
occur...
Turn off the TV set and unplug the AC
power cord immediately if any of the
following problems occur.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
When:
AC power cord is damaged.
Poor fitting of AC power outlet.
TV set is damaged by being dropped,
hit or having something thrown at it.
Any liquid or solid object falls through
openings in the cabinet.
Precautions
Viewing the TV
View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
LCD Screen
Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
The LCD screen contains a small amount
of liquid crystal. Mercury is sometimes
contained depending on the kind of
fluorescent tubes. Follow your local
ordinances and regulations for disposal.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the AC power cord
connected to the TV set from AC power
outlet before cleaning.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
Optional Equipment
Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set. Otherwise
picture distortion and/or noisy sound may
occur.
Batteries
Observe the correct polarity when
inserting batteries.
Do not use different types of batteries
together or mix old and new batteries.
Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
10
GB
Remote and TV Controls/Indicators
Remote and TV controls
Buttons on the TV will work the same as those on the remote.
* In the TV menu, these buttons will work as F/f/G/g/.
z
•The number 5, N, PROG + and AUDIO buttons on the remote have
a tactile dot. Use the tactile dots as a reference when operating the
TV.
Button Description
1 "/1 (TV
standby)
Press to turn the TV on and off from standby
mode.
2 1 (Power) Press to turn the TV on or off.
~
To disconnect the TV, turn off the TV, then
unplug the mains lead/AC power cord from
the mains/AC power.
3
— Twin
Picture/PIP
Displays two pictures simultaneously
(page 22).
11
GB
4 F/f/G/g/ Press F/f/G/g to move the on-screen cursor.
Press to select/confirm the highlighted item.
When playing a photo file: Press F/G to select
the previous file. Press f/g to select the next
file.
When playing a music/video file: Press to
pause/start the playback. Press and hold G/g to
fast forward/fast reverse, then release the
button at the point where you want to resume
playback. Press F to start playback from the
beginning of the current file. Press f to go to
the next file.
5 HOME Press to display the TV Home Menu (page 29).
6 RETURN Press to return to the previous screen of the
displayed menu.
When playing a photo/music/video file: Press
to stop the playback. (The display returns to the
file or folder list.)
7 PROG +/–/
/
In TV mode: Press to select the next (+) or
previous (–) channel.
In Text mode: Press to select the next ( ) or
previous ( ) page.
8 2 +/–
(Volume)
Press to adjust the volume.
9 % (Mute) Press to mute the sound. Press again to restore
the sound.
z
In standby mode, if you want to turn on the
TV without sound, press this button.
0 / (Input
select/Text
hold)
In TV mode: Press to display a list of inputs.
In Text mode: Press to hold the current page.
qa OPTIONS Press to display a list that contains “Device
Control” or shortcuts to some setting menus.
Use the “Device Control” menu to operate
equipment that is compatible with control for
HDMI.
The listed options vary depending on the input
source.
qs / (Text) Press to display text information (page 15).
qd / (Info/
Text reveal)
Each time you press the button, the display
changes as follows:
In digital mode: Details of the current
programme
t Details of the next programme
In analogue mode: Current channel number
and Wide Mode
t Clock information
In Text mode (page 15): Reveals hidden
information (e.g. answers to a quiz).
(Continued)
12
GB
qf GUIDE /
(EPG)
Press to display the Digital Electronic
Programme Guide (EPG) (page 17).
qg
(Favourite)
Press to display the Favourite List that you
have specified (page 18).
qh Coloured
buttons
When the coloured buttons are available, an
operation guide appears on the screen.
qj Number
buttons
In TV mode: Press to select channels. For
channel numbers 10 and above, press the next
digit quickly.
In Text mode: Press to enter a page number.
qk (Wide
Mode)
Press to change the Wide Mode (page 16).
ql (Subtitle
setting)
Press to change the subtitle language (page 39)
(in digital mode only).
w; SCENE Press to display the “Scene Select” menu.
When you select the desired scene option, the
optimum sound quality and picture quality for
the selected scene are automatically set.
Press F/f/G/g to select the scene option, then
press .
Cinema: Delivers picture scenes just like
those in a theatre-like atmosphere with
dynamic sound.
Photo: Delivers picture scenes that
authentically reproduce the texture and colour
of a printed photo.
Sports: Delivers picture scenes that let you
experience realistic picture and sound like
those in a stadium.
Music: Delivers sound effects that let you
experience dynamic and clear sound like that at
a concert.
Game: Delivers picture scenes that let you
enjoy your game-playing experience to the
fullest with superb picture and sound quality.
Graphics: Delivers picture scenes that ease
your prolonged monitor viewing experience
and reduce fatigue by displaying clearer
detailed pictures.
General: Use this setting when you do not
optimise the sound quality and picture quality
for any scene.
Auto: The optimum sound quality and picture
quality are automatically set according to the
input source, though there may not be any
effect depending on the connected devices.
~
When you set Theatre Mode (page 13) to on,
the “Scene Select” setting switches to
“Cinema” automatically.
13
GB
wa AUDIO In analogue mode: Press to change the dual
sound mode (page 33).
In digital mode: Press to change the
language to be used for the programme
currently being viewed (page 39).
ws BRAVIA
Sync
m/N/X/M/x: You can operate the
BRAVIA Sync-compatible equipment that is
connected to the TV.
SYNC MENU: Displays the menu of
connected HDMI equipment. While viewing
other input screens or TV programmes,
“HDMI Device Selection” is displayed when
the button is pressed.
THEATRE: You can set Theatre Mode to on or
off. When Theatre Mode is set to on, the
optimum sound quality (if the TV is connected
with an audio system using an HDMI cable)
and picture quality for film-based contents are
automatically set.
~
If you turn the TV off, Theatre Mode is also
turned off.
When you change the “Scene Select” setting,
Theatre Mode turns off automatically.
“Control for HDMI” (BRAVIA Sync) is only
available with the connected Sony equipment
that has the BRAVIA Sync or BRAVIA
Theatre Sync logo or is compatible with
control for HDMI.
wd DIGITAL/
ANALOG
Switches between digital and analogue modes.
(Continued)
14
GB
The illustrations may differ from that of the actual TV front panel depending on the screen size.
Operation Guide
Example: Press or RETURN (see 4 on page 11 or 6 on page 11).
The operation guide provides help on how to operate the TV using the remote, and is displayed at
the bottom of the screen. Use the remote buttons shown on the operation guide.
Indicators
Indicator Description
1 Light sensor
(page 30)
Do not put anything over the sensor, doing so may affect its function.
2 Remote control
sensor
Receives signals from the remote.
Do not put anything over the sensor. The sensor may not work properly.
3 (Picture Off /
Timer)
Lights up in green when you select “Picture Off” (page 30).
Lights up in orange when you set the timer (page 17, 30).
4 1 (Standby) Lights up in red when the TV is in standby mode.
5 " (Power) Lights up in green when the TV is on.
6 Illuminated clock
(for KDL-22S5700)
The time set by “Clock Set” (page 30) is displayed. The clock is not displayed
when the TV is turned off.
About the operation guide on the TV screen
15
GB
Watching TV
Watching TV
Watching TV
1 Press 1 on the TV to turn on the TV.
When the TV is in standby mode (the 1
(standby) indicator on the TV front panel
is red), press "/1 on the remote to turn on
the TV.
2 Press DIGITAL/ANALOG to switch
between digital and analogue modes.
The available channels vary depending on
the mode.
3 Press the number buttons or PROG +/– to
select a TV channel.
To select a digital programme using the
Digital Electronic Programme Guide
(EPG), see page 17.
In digital mode, an information banner
appears briefly. Each time you press
, the banner changes cyclically as
follows:
Current programme information t Next
programme information t No banner
The following icons may be indicated on
the banner.
: Radio service
: Scrambled/Subscription service
: Subtitles available
: Subtitles available for the hearing
impaired
: Multiple audio languages available
c:Reminder
: Recommended minimum age for
current programme (ages from 4 to
18)
: Parental Lock
To access Text
Press /. Each time you press /, the display
changes cyclically as follows:
Text and TV picture t Text t No Text (exit
the Text service)
To select a page, press the number buttons or
/.
To hold a page, press .
To reveal hidden information, press .
z
• You can also jump directly to a page by selecting
the page number displayed on the screen. Press
and F/f/G/g to select the page number, then press
.
When four coloured items appear at the bottom of
the Text page, you can access pages quickly and
easily (Fastext). Press the corresponding coloured
button to access the page.
2
3
3
(Continued)
16
GB
To change the Wide Mode manually
Press repeatedly to select the desired Wide
Mode.
* Parts of the top and bottom of the picture may be cut off.
You can adjust the vertical position of the picture. Press
F/f to move the picture up or down (e.g. to read
subtitles).
~
When you select “Wide Zoom,” some characters
and/or letters at the top and the bottom of the
picture may not be visible. In such a case, adjust
“Vertical Size” in the “Screen” menu (page 34).
z
• When “Auto Wide” (page 33) is set to “On,” the
TV will automatically select the best mode to suit
the input from an external equipment.
If 720p, 1080i or 1080p source pictures are
displayed with black borders on the screen edges,
select “Wide Zoom” or “Zoom” to adjust the
pictures.
Wide Zoom*
Enlarges the centre
portion of the picture.
The left and right edges
of the picture are
stretched to fill the 16:9
screen.
Normal
Displays the 4:3 picture
in its original size. Side
bars are shown to fill
the 16:9 screen.
Full
Stretches the 4:3
picture horizontally, to
fill the 16:9 screen.
Zoom*
Displays the
cinemascopic (letter
box format) picture in
the correct proportion.
17
GB
Watching TV
Using the Digital Electronic Programme Guide (EPG)
(for digital channels only)
1 In digital mode, press GUIDE.
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
Digital Electronic Programme Guide (EPG)
To Do this
View a programme Press F/f/G/g to select a programme, then press .
Turn off the EPG Press GUIDE.
Sort programme information by
category
– Category list
1 Press the blue button.
2 Press F/f to select a category, then press .
Set a programme to be displayed
automatically on the screen when it
starts
– Reminder
1 Press F/f/G/g to select a future programme you want to display,
then press .
2 Press F/f to select “Reminder,” then press .
A c symbol appears next to the programme’s information. The
indicator on the TV front panel lights up in orange.
~
If you switch the TV to standby mode, the TV will automatically
turn on when the programme starts.
Cancel a reminder
– Timer list
1 Press .
2 Press F/f to select “Timer list,” then press .
3 Press F/f to select the programme you want to cancel, then
press .
4 Press to select “Cancel Timer.
A display appears to confirm that you want to cancel the
programme.
5 Press G/g to select “Yes,” then press .
18
GB
Using the Favourite List
Analogue Favourites
The Favourite feature lets you select
programmes from a list of up to 16 favourite
channels that you specify.
1 In analogue mode, press .
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
Digital Favourites
You can specify up to four of your favourite
channel lists.
1 In digital mode, press .
2 Perform the desired operation as shown in
the following table or displayed on the
screen.
A
nalogue Favourite List
To Do this
Watch a channel Press .
Turn off the Favourite list Press .
Add a current channel to the
Favourite list
Press F/f to select “Add to Favourites,” then press .
Remove a channel from the Favourite
list
1 Press F/f to select “Edit Favourites,” then press .
The “Favourite Set-up” screen appears.
2 Press F/f to select the channel number, then press .
3 Press F/f to select “– – –,” then press .
Digital Favourite List
To Do this
Turn off the Favourite list Press RETURN.
Add or remove channels in a
Favourite list
1 Press the blue button.
Go to step 2 when you add channels for the first time or the
Favourite list is empty.
2 Press the yellow button to select the Favourite list to edit.
3 Press F/f/G/g to select the channel to add or remove, then press
.
Watch a channel
1 Press the yellow button to select a Favourite list.
2 Press F/f to select a channel, then press .
Remove all channels from a Favourite
list
1 Press the blue button.
2 Press the yellow button to select the Favourite list to edit.
3 Press the blue button.
4 Press G/g to select “Yes,” then press .
19
GB
Using Optional Equipment
Using Optional Equipment
Connecting Optional Equipment
You can connect a wide range of optional equipment to your TV
(The connector panel illustrations are of the KDL-40V5500).
Digital still camera
Camcorder
USB storage media
Camcorder
Headphones
DVD player
Blu-ray disc
player
Audio system
PC
(HDMI-output)
PC
Hi-Fi audio equipment
Home theatre system
with digital input
Video
game
equipment
DVD player
DVD player with
component output
VCR
Broadband router
Camcorder
KDL-52V5500/
40V5500 only
(Continued)
20
GB
Connecting audio-video equipment (quality order, high to low)
Connect to Connect with Description
4 HDMI IN 1, 2, 3,
or 4 (for KDL-
52V5500/40V5500)
HDMI IN 1 or 2 (for
KDL-37S5500/
32S5500/26S5500/
22S5700)
HDMI cable Digital video and audio signals are input from the connected
equipment.
In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. See page 36 to set up this
communication.
If the equipment has a DVI socket/jack, connect the DVI
socket/jack to the HDMI IN 1 socket/jack through a DVI -
HDMI adaptor interface (not supplied), and connect the
equipment’s audio out socket/jack to the PC/HDMI 1 AUDIO
IN socket/jack in the PC IN sockets/jacks. (The PC/HDMI 1
AUDIO IN socket/jack is used as the audio in socket/jack for
both the PC IN and HDMI IN 1 sockets/jacks.)
~
Be sure to use only an authorised HDMI cable bearing the
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
When connecting an audio system that is compatible with
control for HDMI, be sure to also connect it to the
DIGITAL AUDIO OUT (OPTICAL) socket/jack.
3 / 1 or 2 Component video
cable, audio cable
When using the component video jack 1 as the video jack
3, select “Video 3” in the “Video 3/Component 1 Input”
menu (page 36).
~
You cannot use the component video jack 1 and the
video jack 3 at the same time.
2 9 1, 1
or 2, and 1
or 2
S-video cable or
composite video
cable, audio cable
To avoid picture noise, do not connect the camcorder to the
video jack 1 and the S video jack 1 at the same time.
If you connect a mono equipment, connect to the L (MONO)
jack 1 or 2.
When using the video jack 1 and audio jack 1 as
output jacks, select “Output” in the “Video 1 Input/Output”
menu (page 36).
Connecting audio/portable equipment
Connect to Connect with Description
5 DIGITAL
AUDIO OUT
(OPTICAL)
Optical audio
cable
You can listen to TV sound on the connected Home theatre
system with digital input.
1 Audio cable You can listen to TV sound on the connected Hi-Fi audio
equipment.
8 USB USB cable You can enjoy photo/music/video files stored in a Sony
digital still camera or camcorder (page 23).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96

Sony KDL-40V5500 ユーザーマニュアル

カテゴリー
液晶テレビ
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で