AIC XJ3000-3163 データシート

カテゴリー
コンピュータケース
タイプ
データシート
STORAGE SOLUTIONS GROUP
Features :
• 16 x 6G SAS/SATA hard disk bays with lock
• 3 x hot-swap fans
• Hot-swap 500W 12V high-efciency redundant
power supply module
• 2 x 24Gb/s Mini SAS ports with single expanders
4 x 24Gb/s Mini SAS ports with dual expanders
• Serial port for console monitoring
The 3U 16-bay entry-level 6G JBOD is ideal for high-availability storage and high performance appliance. This enclosure supports two 6G expander modules for redundancy and
16x 6G (backplane support) SAS/SATA hard disk bays. It’s the perfect appliance building-block for OEM/ODM and System Integrators.
SPECIFICATIONS
Mechanical Drawing
XJ3000-3163
Entry-level 6G JBOD Series
General
Number of Expander Single/Dual
Expander Chip LSISAS2x28
Host Interface Single Mini SAS 4x connector
Expansion Interface Single Mini SAS 4x connector
Transfer Bandwidth 2,400MB/s per connector
Drives
Supported
Drive Interface
3.0/6.0 Gb dual ported SAS,
1.5/3.0/6.0 Gb single ported SATA
Drive RPM Up to 15,000
Form Factor 3.5”, 1” height
Administration /
Management
Admin/Firmware Upgrade
In-band & Out-of-band
Serial port via Hyperterminal
LED Indicators,
Audible Alarm
Yes
Hot-swap and
Redundancy
Disk Drive Hot-swap 16-bay
Cooling 3 x hot-swap fans
Power Supply
500W 1+1 hot-swap redundant
80+ (Sliver)
Power Entry Dual AC Inlet
Electrical and
Environmental
Universal A/C Input 100~240V AC full range
Operating Environment
Temperature 0ºC to 35ºC
Relative humidity 20% to 80%
Non-operating Environment
Temperature -20ºC to 60ºC
Relative humidity 10% to 90%
Physical
Specication
Dimensions (W x D x H)
(with chassis ears)
mm : 482.6 x 450 x 133.4
inches : 19 x 17.7 x 5.25
Gross Weight
(w/ PSU; w/o Rail & Disks)
26 kgs / 57.2 lbs
Packaging Dimension
(W x D x H)
mm : 600 x 730 x 333
Cubic Feet 5.2
Reference Container
Loading
20’ 180
40’ 375
40’ H 450
Mounting Option
Adjust plate or 20” tool-less rail
(optional)
Remark: All specications and photos are subject to change without notice.
© 2014 AIC Inc. All rights reserved.
JBOD
ORDERING INFORMATION
Part Number Description
SSG-JBSA21-3163-A2 3U 16 x 3.5” Bays 6G JBOD with single mezzanine board, 500W 1+1 HRP
SSG-JBSA21M-3163 3U 16 x 3.5” Bays 6G JBOD with single mezzanine board, 500W 1+1 HRP
SSG-JBSA22M-3163 3U 16 x 3.5” Bays 6G JBOD with dual mezzanine board, 500W 1+1 HRP
SSG-JBSA21E-3163 3U 16 x 3.5” Bays 6G JBOD expander on board, 500W 1+1 HRP
FRU Parts
PSU-PR50HZ0-XJ30-3163 MRW-5500V4V 500W 1+1 mini HRP
FAN-8032MO-XJ30-4243 8032 fan module
SLR-TL2230-430-DS SLR-TL20-TW-AR / 20” tool-less rail
BTK-ADJ-XJ30-2123-MO Rear adjust plate
DOR-HEX-RMC-3EG 3U hex hole bezel
• TOP VIEW •
• REAR VIEW •
3 x hot-swap fans
Serial port for console monitoring
Hot-swap 500W 12V high-efciency
redundant power supply module
2 x 24Gb/s Mini SAS ports with single expanders
4 x 24Gb/s Mini SAS ports with dual expanders
• FRONT VIEW •
16 x 6G SAS/SATA hard disk bays with lock
Tray Options
G-Tray - Standard H-Tray - Option
1 / 1