HK634203XB
EN
INDUCTION HOB USER MANUAL
2
JA
調理ホブ ユーザーマニュアル
16
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to keep all your AEG
appliances looking spotless and working perfectly. Along with a wide range of
accessories designed and built to the high quality standards you would expect,
from specialist cookware to cutlery baskets, from bottle holders to delicate
laundry bags…
Visit the webshop at:
www.aeg.com/shop
2
CONTENTS
4 Safety information
5 Installation instructions
7 Product description
9 Operating instructions
12 Helpful hints and tips
13 Care and cleaning
14 What to do if…
15 Environment concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
Contents
3
SAFETY INFORMATION
For your safety and correct operation of the appliance, read this manual carefully before
the installation and use. Always keep these instructions with the appliance also if you move
or sell it. The users must fully know the operation and safety functions of the appliance.
Children and vulnerable people safety
WARNING!
Do not let persons, children included, with reduced physical sensory, reduced mental func-
tions or lack of experience and knowledge to use the appliance. They must have supervision
or instruction for the operation of the appliance by a person who is responsible for their
safety.
• Keep all packaging away from children. There is the risk of suffocation or injury.
• Keep the children away from the appliance during and after the operation, until the ap-
pliance is cold.
WARNING!
Activate the child safety device to prevent small children and pets from an accidental acti-
vation of the appliance.
Safety during operation
• Remove all packaging, stickers and layers from the appliance before the first use.
• Set the cooking zones to "off" after each use.
• The risk of burns! Do not put the objects made of metal, for example cutlery or saucepan
lids, on the surface that you cook. They can become hot.
• The Users with an implanted pacemaker must keep their upper body minimum 30 cm
from induction cooking zones that are activated.
WARNING!
Fire risk! Too hot fats and oils can occur with ignition very quickly.
Correct operation
• Always monitor the appliance during operation.
• The appliance is only for domestic use!
• Do not use the appliance as a work or a storage surface.
• Do not put or keep very flammable liquids and materials, easy fusible objects (made of
plastic or aluminium) on or near the appliance.
• Be careful when you connect the appliance to the near sockets. Do not let the electricity
bonds touch the appliance or hot cookware. Do not let the electricity bonds to tangle.
How to prevent a damage to the appliance.
• If the objects or cookware fall on the glass, the surface can be damaged.
• Cookware made of cast iron, cast aluminium or with damaged bottoms can cause
scratch of the glass. Do not move them on the surface.
4 Safety information
• Do not let cookware boil dry to prevent the damage to cookware and glass .
• Do not use the cooking zones with empty cookware or without cookware.
• Do not put the aluminium foil on the appliance.
• Make sure that the airflow space of 5 mm between the worktop and front of the unit
below it stays opened.
WARNING!
If there is a crack on the surface, disconnect power supply to prevent the electrical
shock.
INSTALLATION INSTRUCTIONS
Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The
rating plate of the appliance is on its lower casing.
HK634203XB
949 595 096 00
58 GAD D6 WG
200 V 50-60-Hz
6,0 kW
Induction 6,0 kW
AEG
The Safety Instructions
WARNING!
You must read these!
• Make sure that the appliance is not damaged because of transportation. Do not connect
a damaged appliance. If it is necessary, speak to the supplier.
• Only an authorized servicing technician can install, connect or repair this appliance. Use
only original spare parts.
• Only use the built-in appliances after you assemble the appliance into correct built-in
units and work surfaces that align to the standards.
• Do not change the specifications or change this product. Risk of injury and damage to
the appliance.
• Fully obey the laws, ordinances, directives and standards in force in the country where
you use the appliance (safety regulations, recycling regulations, electrical safety rules
etc.)!
• Keep the minimum distances to other appliances and units!
• Install shock protection, for example install the drawers only with a protective floor di-
rectly below the appliance!
• Keep safe the cut surfaces of the worktop from moisture with a correct sealant!
• Seal the appliance to the work top with no space between with a correct sealant!
• Keep safe the bottom of the appliance from steam and moisture, e.g. from a dishwasher
or oven!
• Do not install the appliance adjacent to doors and below windows! If not, when you
open the doors or windows they can push off hot cookware from the appliance.
Installation instructions
5
WARNING!
Risk of injury from electrical current. Carefully obey the instructions for electrical connec-
tions.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Install correctly to give shock protection.
• Loose and incorrect plug and socket connections can make the terminal become too hot.
• A qualified electrician must install the connections in the clamps correctly.
• Use a strain relief clamp on cable.
• Use the correct mains cable of type H05BB-F Tmax 90°C (or higher) for a single phase or
two phase connection.
• Replace the damaged mains cable with a special cable (type H05BB-F Tmax 90°C; or
higher). Speak to your local Service Centre.
The appliance must have the electrical installation which lets you disconnect the appliance
from the mains at all poles with a contact opening width of minimum 3 mm.
You must have correct devices to isolate: line protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips and contactors.
Assembly
min.
50mm
min.
50mm
min.
500mm
min.
5mm
=
=
490
+1
mm
560
+1
mm
600mm
R 5mm
6 Installation instructions
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
If you use a protection box (the additional acces-
sory), the front airflow space of 5 mm and protec-
tive floor directly below the appliance are not
necessary.
You can not use the protection box if you install
the appliance above an oven.
PRODUCT DESCRIPTION
General overview
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1 Induction cooking zone 1500 W, with
Power function 2100 W (minimum
cookware diameter =145mm).
2 Induction cooking zone 1500 W, with
Power function 2100 W (minimum
cookware diameter =145mm).
3 Induction cooking zone 1100 W, with
Power function 2100 W (minimum
cookware diameter =125mm).
4 Control panel
5 Induction cooking zone 1900 W, with
Power function 2400 W (minimum
cookware diameter =180mm).
Product description 7
Control panel layout
1 2 3 4 5 6 7
8910
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
sensor field function
1
It activates and deactivates the appliance
2
It locks/unlocks the control panel
3
A heat setting display It shows the heat setting
4
Cooking zones' indicators of timer It shows for which zone you set the time
5
The timer display It shows the time in minutes
6
/ It increases or decreases the heat setting
7
It activates the Power function
8
/
It increases or decreases the time
9
It selects the cooking zone
10
It activates and deactivates the STOP+GO function
Heat setting displays
Display Description
The cooking zone is deactivated.
Keep warm/STOP+GO function operates.
- / -
The cooking zone operates.
Automatic Heat Up function operates.
Not correct cookware or too small cookware or no cookware on the
cooking zone.
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/ The Child Safety device operates.
Power function operates.
8 Product description
Display Description
The Automatic Switch Off operates.
Residual heat indicator
WARNING!
The risk of burns from residual heat!
The induction cooking zones make the heat necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from the heat of the cookware.
OPERATING INSTRUCTIONS
Activation and deactivation
Touch for 1 second to activate or deactivate the appliance.
Automatic Switch Off
The function deactivates the appliance automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after you activate the appliance.
• You spill something or put something on the control panel for more than 10 seconds, (a
pan, a cloth, etc.). The sound operates some time and the appliance deactivates. Remove
the object or clean the control panel.
• The appliance become too hot (e.g. when, a saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be cool.
• You use not correct cookware. The symbol
comes on and the cooking zone deacti-
vates automatically after 2 minutes.
• You do not deactivate a cooking zone or change the heat setting. After some time,
comes on and the appliance deactivates. See the table.
The times of Automatic Switch Off
The heat setting
- - -
The cooking zone
deactivates after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to decrease the heat setting. The display
shows the heat setting. Touch
and at the same time to deactivate the cooking zone.
Operating instructions
9
Automatic Heat Up
You can get a necessary heat setting in a shorter
time if you activate the Automatic Heat Up func-
tion. This function sets the highest heat setting
for some time (see the illustration), and then de-
creases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1. Touch
. The symbol comes on in the
display.
2. Immediately touch
. The symbol comes
on in the display.
3. Immediately touch
again and again until
the necessary heat setting comes on. After 3
seconds
comes on in the display.
To stop the function touch
.
Power function
The Power function makes more power available to the induction cooking zones. The Power
function is activated for 10 minutes at most. After, that the induction cooking zone auto-
matically sets back to highest heat setting. To activate, touch
, comes on. To deacti-
vate, touch
or .
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the illus-
tration). The power function increases the power
to the maximum level for one cooking zone in the
pair. Automatically decreases the power in the
second cooking zone to a lower level. The display
for the reduced zone change between two levels.
Timer
Use the Count Down Timer to set how long the cooking zone operates for only this one
time.
Set the Timer after the selection of the cooking zone.
You can set the heat setting before or after you set the timer.
• To set the cooking zone:touch
again and again until the indicator of a necessary
cooking zone comes on.
• To activate or change the Timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the cooking zone starts to flash slow, the time counts
down.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
10 Operating instructions
• To deactivate the Timer: set the cooking zone with and touch to deactivate the
Timer. The remaining time counts back to
00
. The indicator of the cooking zone goes
out.
• To see the remaining time: set the cooking zone with
. The indicator of the cooking
zone starts to flash quickly. The display shows the remaining time.
When the time comes to an end, the sound operates and
00
flashes. The cooking zone de-
activates.
• To stop the sound: touch
You can use the Timer as a minute minder while the cooking zones do not operate. Touch
. Touch or to set the time. When the time comes to an end, the sound operates
and
00
flashes
• To stop the sound: touch
STOP+GO
The function sets all cooking zones that operate to the lowest heat setting ( ).
When
operates, you cannot change the heat setting.
The
function does not stop the timer function.
• To activate this function touch
. The symbol comes on.
• To deactivate this function touch
. The heat setting that you set before comes on.
Lock
When the cooking zones operate, you can lock the control panel, but not . It prevents an
accidental change of the heat setting.
First set the heat setting.
To start this function touch
. The symbol comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat setting that you set before comes on.
When you stop the appliance, you also stop this function.
The child safety device
This function prevents an accidental operation of the appliance.
To activate the child safety device
• Activate the appliance with
. Do not set the heat settings.
• Touch
for 4 seconds. The symbol comes on.
• Deactivate the appliance with
.
To deactivate the child safety device
• Activate the appliance with
. Do not set the heat settings. Touch for 4 seconds.
The symbol
comes on.
• Deactivate the appliance with
.
To override the child safety device for only one cooking time
• Activate the appliance with
. The symbol comes on.
• Touch
for 4 seconds. Set the heat setting in 10 seconds. You can operate the appli-
ance.
• When you deactivate the appliance with
, the child safety device operates again.
Operating instructions
11
HELPFUL HINTS AND TIPS
Use the induction cooking zones with correct cookware.
Cookware for induction cooking zones
For induction cooking zones a strong electro-magnetic field creates the heat in the cook-
ware very quickly.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer
(with correct mark from a manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic, porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookwar must be as thick and flat as possible.
Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of
the cookware automatically to some limit.
The noises during operation
If you can hear
• crack noise: cookware is made of different materials (Sandwich construction).
• whistle sound: you use one or more cooking zones with high power levels and the cook-
ware is made of different materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to appliance malfunction.
Energy saving
• If it is possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start it.
The Examples of cooking applications
The data in the table is for guidance only.
Heat
setting
Use to: Time Hints
1
Keep warm the food you cooked as re-
quired
Put a lid on a cookware
1-2 Hollandaise sauce, melt: butter, choco-
late, gelatine
5-25
min
Mix from time to time
12 Helpful hints and tips
Heat
setting
Use to: Time Hints
1-2 Solidify: fluffy omelettes, baked eggs 10-40
min
Cook with a lid on
2-3 Simmer rice and milkbased dishes, heat-
ing up ready-cooked meals
25-50
min
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through
3-4 Steam vegetables, fish, meat 20-45
min
Add some tablespoons of liquid
4-5 Steam potatoes 20-60
min
Use max. ¼ l water for 750 g of po-
tatoes
4-5 Cook larger quantities of food, stews
and soups
60-150
min
Up to 3 l liquid plus ingredients
6-7 Gentle fry: escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver, roux,
eggs, pancakes, doughnuts
as nec-
essary
Turn halfway through
7-8 Heavy fry, hash browns, loin steaks,
steaks
5-15
min
Turn halfway through
9 Boil large quantities of water, cook pasta, sear meat (goulash, pot roast), deep-fry chips
The Power function is best to heat up large quantities of water.
Information on acrylamides
Important! According to the newest scientific knowledge, if you brown food (specially the
one which contains starch), acrylamides can pose a health risk. Thus, we recommend that
you cook at the lowest temperatures and do not brown food too much.
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
The sharp objects and abrasive cleaning agents can cause damage to the appliance.
For your safety, do not clean the appliance with steam cleaners or high-pressure cleaners.
Scratches or dark stains on the glass-ceramic cause no effect on how the appliance oper-
ates.
To remove the dirt:
1. – Remove immediately:melted plastic, plastic foil, and food with sugar. If not, the dirt
can cause damage to the appliance. Use a special scraper for the glass . Put the
scraper on the glass surface at an acute angle and move the blade on the surface .
– Remove after the appliance is sufficiently cool:limescale rings , water rings, fat
stains, shiny metallic discolorations. Use a special cleaning agent for glass ceramic
or stainless steel.
Care and cleaning
13
2. Clean the appliance with a moist cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF…
Problem Possible cause and remedy
You cannot activate the appli-
ance or operate it.
• Activate the appliance again and set the heat setting in 10
seconds.
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• The Child Safety Device or the Lock or Stop+Go operates. See
the chapter Operating instruction.
• There is water or fat stains on the control panel. Clean the
control panel.
A Sound operates and the ap-
pliance deactivates.
A sound operates when the ap-
pliance is deactivated.
You put something on one or more sensor fields. Remove the ob-
ject from the sensor fields.
The appliance deactivates.
You put something on the . remove object from the sensor
field.
The residual heat indicator does
not comes on.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone should be hot, speak to the service cen-
tre.
The Automatic Heat Up func-
tion does not operate.
• There is still residual heat on the cooking zone. Let the cooking
zone become sufficiently cool.
• The highest heat setting is set. The highest heat setting has the
same power as the Automatic Heat Up function.
The heat setting changes be-
tween two levels.
The Power management is activated. See the section Power man-
agement.
The sensor fields become hot. The cookware is too large or you out it too near to the controls.
Put large cookware on the rear cooking zones if it is necessary.
comes on
The Automatic Switch Off operates. Deactivate the appliance and
activate it again.
comes on
• No cookware on the cooking zone. Put cookware on the cook-
ing zone.
• Not correct cookware. Use the correct cookware.
• The diameter of the bottom of the cookware is too small for
the cooking zone. Move cookware to a smaller cooking zone.
and number comes on.
There is an error in the appliance.
Disconnect the appliance from the electrical supply for some
time. Disconnect the fuse from the electrical system of the house.
Connect again. If
comes on again, speak to the service centre.
14 What to do if…
Problem Possible cause and remedy
comes on
There is an error in the appliance, because a cookware boils dry.
The protection against become too hot for the cooking zone op-
erates. The Automatic Switch Off operates.
Deactivate the appliance. Remove the hot cookware. After, ap-
proximately 30 seconds activate the cooking zone again.
should go out of the display, residual heat indicator can stay. Let
the cookware become sufficiently cool and check it with the sec-
tion Cookware for the induction cooking zone.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the
customer service. Give the data from the rating plate, three digit letter code for the glass
ceramic (it is in the corner of the glass surface) and an error message that comes on.
Make sure, you operated the appliance correctly. If not the servicing by a customer service
technician or dealer will not be free of charge, also during the warranty period. The instruc-
tions about the customer service and conditions of guarantee are in the guarantee booklet.
ENVIRONMENT CONCERNS
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging materials are friendly to the environment and can be recycled. The plastic
components are identified by marking: >PE<,>PS<, etc. Discard the packaging materials as
household waste at the waste disposal facilities in your municipality.
Environment concerns
15
最大限にご活用いただくために
AEG 製品をお買い上げいただきありがとうございます。 この製品は長期間に渡
って優れた性能を発揮するように、通常の製品には見られない、消費者皆様の生
活をよりシンプルにする革新的なテクノロジーを用いて製造されています。 製
品を最大限に活用するために少し時間を取ってお読みください。
アクセサリと消耗品
AEG ウェブショップでは、製品を汚れも故障もなく使い続けていただくために必
要なものをすべて取り揃えております。 専門調理具、刃物バスケット、ボトルホ
ルダからデリケートな洗濯物バッグまで、考えられる限りの高い品質基準で設
計・製造された様々なアクセサリがございます。
ウェブショップはこちら
www.aeg.com/shop
16
コンテンツ
18 安全についての情報
19 取り付け指示
21 製品説明
22 操作指示
25 お役立ちヒントや一口メモ
27 ケアと清掃
27 トラブルシューティング
29 環境保護
次のシンボルがこの取扱説明書の中で使われ
ています：
あなた自身の安全に関する重要な情報と、ど
のように機器の損傷を防ぐことができるかに
ついての情報。
般的な情報と助言
環境に関する情報
予告なしに仕様を変更することがあります。
コンテンツ
17
安全についての情報
本製品を安全に正しくお使いいただくため、取り付け、ご使用になる前にこのマニュアルを
よくお読みください。本製品を移動または販売する際にもマニュアルを機器に必ず添付し
てください。本製品の使い方と安全機能について十分に理解してください。
お子様と体が弱い人の安全
警告
お子様も含め、身体感覚が弱い方、精神的機能が低下している方、または経験や知識が浅い
方には本機を使用させないでください。上記のような方は、、かならず安全面で責任を負え
る方の監督または指示の下で使用してください。
• 梱包材はお子様の手の届かない場所に置いてください。窒息または怪我の恐れがありま
す。
• 使用中、または使用後本製品が冷めるまで、お子様を本製品に近づけないでください。
警告
幼児やペットが誤って本製品を作動させないように、子供用安全装置をご使用ください。
使用時の安全事項
• 初めてご使用になる前に、梱包材、ステッカー、レイヤーを本製品からすべて取り除いて
ください。
• クッキングゾーンを使用した後は、必ずスイッチを「オフ」にしてください。
• やけどの危険があります!金属製のもの、たとえばナイフやフォーク、鍋のふたなどを調
理を行う面におかないでください。熱くなります。
• 埋め込み式ペースメーカーをご使用の方は、電源が入っている IH クッキングゾーンから
30 センチ以上離れてください。
警告
火災の危険! 温度が上がりすぎた油脂は非常に早く引火します。
正しい使い方
• 使用中は本製品から離れないでください。
• 本製品は一般家庭用です。
• 本製品を作業台または保管場所として使用しないでください。
• 可燃性液体や可燃物または可溶性のもの（プラスチック製やアルミニウム製のもの）を本
製品の上または近くに置かないでください。
• 本製品をコンセントに接続する際には注意してください。電源コードが本製品または熱
い調理器具に触れないようにしてください。電源コードが絡まらないようにしてくださ
い。
本製品の破損を防ぐために
• 物や調理器具をガラスセラミックに落とすと、表面が破損することがあります。
• 鋳鉄、アルミキャスト製の調理器具または底が破損した調理器具はガラス表面を傷つける
場合があります。それらの調理器具をガラス面上で動かさないでください。
18
安全についての情報
• 調理器具とガラスセラミックの破損を防ぐため、調理器具を空焚きしないでください。
• 空の調理器具、または調理器具なしでクッキングゾーンを使用しないでください。
• 本製品の上にアルミホイルを置かないでください。
• 調理台とその下のユニット前面との間にある 5mm の換気スペースを塞がないように気
を付けてください。
警告
表面に割れ目がある場合は、感電防止のために電源を切ってください。
取り付け指示
据え付けの前に、銘板からシリアル番号 (Ser. Nr.) をメモしておいてください。本製品の銘
板は下部ケーシングにあります。
HK634203XB
949 595 096 00
58 GAD D6 WG
200 V 50-60-Hz
6,0 kW
Induction 6,0 kW
AEG
安全上のご注意
警告
「安全上のご注意」を必ずお読みください。
• 運搬中に本製品が破損していないか確認してください。本製品が破損している場合は、接
続しないでください。必要な場合は、代理店にお問い合わせください。
• 資格のある保守技術者のみが本製品を取り付け、接続、または修理することができます。
純正スペア部品だけをお使いください。
• 本製品を、基準どおりに適切なビルトインユニットおよび調理台に組み立てたら、そのま
までご利用ください。
• 仕様や、本製品の改造をしないでください。怪我や、本製品破損のおそれがあります。
• 本製品を使用する国の法律、条例、指示、および基準をすべて遵守してください（安全規
則、リサイクル規則、電気に関する安全規則など）。
• 別の器具やユニットとの間隔には、最小限の間を空けてください。
• 衝撃保護を施してください。たとえば、引き出しを取り付けるのは、本製品真下の床に衝
撃保護を施してある場合のみなど。
• 適切なシーリング材を使用して、調理台の断面を湿気から保護してください。
• 適切なシーリング材を使用して、本製品を調理台に隙間なく取り付けます。
• 食器洗い機やオーブンなどの蒸気や湿気から、本製品の底部を保護してください。
• ドアの横または窓の下に本製品を取り付けないでください。ドアまたは窓を開けた時に、
熱い調理器具を本製品の上から突き落してしまうかもしれません。
警告
電流による怪我の危険があります。電気配線に関する指示に慎重に従ってください。
• 電源接続端子には電圧がかかっています。
• 電源接続端子を電源から外してください。
• 衝撃保護のため、正しく据え付けてください。
取り付け指示
19
• 緩みのある差し込み接続または不適切な差込み接続が原因で、端子が過熱することがあり
ます。
• 有資格電気技術者だけが圧着接続を適切に取り付けることができます。
• ストレインリリーフクランプを使用してください。
• 単相または二相接続には、タイプ H05BB-F Tmax 90°C 以上の適切な電源コードを使用し
てください。
• 破損した電源コード、専用ケーブル（タイプ H05BB-F Tmax 90°C 以上）と交換してくだ
さい。お近くのサービスセンターまでお問い合わせください。
全ての極の開極幅が 3mm 以上となるようにして、壁のコンセントから本製品の電源を抜け
る状態で本線の電気配線を行ってください。
次のものに対し適切な絶縁装置をご使用ください。ヒューズ（ホルダーから外すスクリュー
タイプのヒューズ）、漏電遮断器、および接触機など。
組立て
min.
50mm
min.
50mm
min.
500mm
min.
5mm
=
=
490
+1
mm
560
+1
mm
600mm
R 5mm
min.
25 mm
min.
5 mm
min.
20 mm
min.
38 mm
min.
5 mm
20
取り付け指示
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/