Denon Brand Company, D&M Holdings lnc.
e
For purposes of improvement, specifications and
design are subject to change without notice.
Please use this service manual with referring to the
operating instructions without fail.
Some illustrations using in this service manual are
slightly different from the actual set.
S-1178 V.03 DE/CDM 0803
SERVICE MANUAL
SPEAKER SYSTEM
MODEL JP E3 E2 EK E2A E1C E1K EUT
SC-CX101
333 3
Ver. 3
Please refer to the
MODIFICATION NOTICE.
sdd
2
SC-CX101
Please heed the points listed below during servicing and inspection.
Heed the cautions!
Spots requiring particular attention when servicing, such
as the cabinet, parts, chassis, etc., have cautions indicated
on labels or seals. Be sure to heed these cautions and the
cautions indicated in the handling instructions.
Caution concerning electric shock!
(1) An AC voltage is impressed on this set, so touching in-
ternal metal parts when the set is energized could
cause electric shock. Take care to avoid electric shock,
by for example using an isolating transformer and
gloves when servicing while the set is energized, un-
plugging the power cord when replacing parts, etc.
(2)There are high voltage parts inside. Handle with extra
care when the set is energized.
Caution concerning disassembly and
assembly!
Though great care is taken when manufacturing parts from
sheet metal, there may in some rare cases be burrs on the
edges of parts which could cause injury if fingers are
moved across them. Use gloves to protect your hands.
Only use designated parts!
The set's parts have specific safety properties (fire resis-
tance, voltage resistance, etc.). For replacement parts, be
sure to use parts which have the same properties. In par-
ticular, for the important safety parts that are marked z on
wiring diagrams and parts lists, be sure to use the desig-
nated parts.
Be sure to mount parts and arrange
the wires as they were originally!
For safety reasons, some parts use tape, tubes or other in-
sulating materials, and some parts are mounted away from
the surface of printed circuit boards. Care is also taken with
the positions of the wires inside and clamps are used to
keep wires away from heating and high voltage parts, so
be sure to set everything back as it was originally.
Inspect for safety after servicing!
Check that all screws, parts and wires removed or discon-
nected for servicing have been put back in their original po-
sitions, inspect that no parts around the area that has been
serviced have been negatively affected, conduct an insu-
lation check on the external metal connectors and between
the blades of the power plug, and otherwise check that
safety is ensured.
(Insulation check procedure)
Unplug the power cord from the power outlet, disconnect
the antenna, plugs, etc., and turn the power switch on. Us-
ing a 500V insulation resistance tester, check that the in-
sulation resistance between the terminals of the power
plug and the externally exposed metal parts (antenna ter-
minal, headphones terminal, microphone terminal, input
terminal, etc.) is 1M or greater. If it is less, the set must
be inspected and repaired.
Concerning important safety
parts
Many of the electric and structural parts used in the set
have special safety properties. In most cases these prop-
erties are difficult to distinguish by sight, and using re-
placement parts with higher ratings (rated power and
withstand voltage) does not necessarily guarantee that
safety performance will be preserved. Parts with safety
properties are indicated as shown below on the wiring dia-
grams and parts lists is this service manual. Be sure to re-
place them with parts with the designated part number.
(1) Schematic diagrams ... Indicated by the z mark.
(2) Parts lists ... Indicated by the z mark.
Using parts other than the designated
parts could result in electric shock, fires or
other dangerous situations.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
CAUTION
CAUTION
3
SC-CX101
z
z
z
4
SC-CX101
NOTE FOR PARTS LIST
• Parts for which "nsp" is indicated on this table cannot be supplied.
• When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-
supplying.
• Ordering part without stating its part number can not be supplied.
• Part indicated with the mark " " is not illustrated in the exploded view.
• Not including General-purpose Carbon Film Resistor in the P.W.Board
parts list. (Refer to the Schematic Diagram for those parts.)
• Not including General-purpose Carbon Chip Resistor in the P.W.Board
parts list. (Refer to the Schematic Diagram for those parts.)
WARNING:
Parts marked with this symbol z have critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
s
s
s
s
s
s
s
s
s
s
s
s
RD : 2B : 1/8 W F : ±1% P :
RC : 2E : 1/4 W G : ±2% NL :
RS : 2H : 1/2 W J : ±5% NB :
RW : 3A : 1 W K : ±10% FR :
RN : 3D : 2 W M : ±20% F :
RK : 3F : 3 W
3H : 5 W
RN 14K 2E 182 G FR
∗
18 2
Ö
1800
=1.8k
0
2
1R 2
Ö
1.2
1
2 R
CE 04W 1H 2R2 M BP
CE : 0J : 6.3 V F : ±1% HS :
CA : 1A : 10 V G : ±2% BP :
CS : 1C : 16 V J : ±5% HR :
CQ : 1E : 25 V K : ±10% DL :
CK : 1V : 35 V M : ±20% HF :
CC : 1H : 50 V Z : +80% U : UL
CP : 2A : 100 V −20% C : CSA
CM : 2B : 125 V P : +100% W : UL-CSA
CF : 2C : 160 V − 0% F :
CH : 2D : 200 V C : ±0.25pF
2E : 250 V D : ±0.5pF
2H : 500 V = :
2J : 630 V
∗
22 2
Ö
2200
μ
F
0
2
μ
F
22 2
Ö
2200pF=0.0022
μ
F
0
2
p
F
p
F
22 1
Ö
220pF
2
(0 2 )
0
(0 0 1 )
2R 2
Ö
2.2
μ
F
1
2 R
μ
F
AC
RD : Carbon 2B : 1/8W F : ±1% P : Pulse-resistant type
RC : Composition 2E : 1/4W G : ±2% NL : Low noise type
RS : Metal oxide film 2H : 1/2W J : ±5% NB : Non-burning type
RW : Winding 3A : 1W K : ±10% FR : Fuse-resistor
RN : Metal film 3D : 2W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3W
3H : 5W
CE : Aluminum foil 0J : 6.3V F : ±1% HS : High stability type
electrolytic
CA : Aluminum solid 1A : 10V G : ±2% BP : Non-polar type
electrolytic
CS : Tantalum electrolytic 1C : 16V J : ±5% HR : Ripple-resistant type
CQ : Film 1E : 25V K : ±10% DL : For change and discharge
CK : Ceramic 1V : 35V M : ±20% HF : For assuring high
requency
CC : Ceramic 1H : 50V Z : +80% U : UL part
CP : Oil 2A : 100V –20% C : CSA part
CM : Mica 2B : 125V P : +100% W : UL-CSA type
CF : Metallized 2C : 160V –0% F : Lead wire forming
CH : Metallized 2D : 200V C : ±0.25pF
2E : 250V D : ±0.5pF
2H : 500V = : Others
2J : 630V
ll
ll
l
Resistors
Ex.: RN 14K 2E 182 G FR
Type Shape Power Resist- Allowable Others
and per- ance error
formance
] Resistance
1 8 2 ⇒ 1800 ohm = 1.8 kohm
Indicates number of zeros after effective number.
2-digit effective number.
• Units: ohm
1 R 2 ⇒ 1.2 ohm
1-digit effective number.
2-digit effective number, decimal point indicated by R.
• Units: ohm
ll
ll
l
Capacitors
Ex.: CE 04W 1H 2R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error
formance
] Capacity (electrolyte only)
2 2 2 ⇒ 2200μF
Indicates number of zeros after effective number.
2-digit effective number.
• Units: μF.
2 R 2 ⇒ 2.2μF
1-digit effective number.
2-digit effective number, decimal point indicated by R.
• Units: μF.
] Capacity (except electrolyte)
2 2 2 ⇒ 2200pF=0.0022μF
(More than 2) Indicates number of zeros after effective number.
2-digit effective number.
• Units: pF.
2 2 1 ⇒ 220pF
(0 or 1) Indicates number of zeros after effective number.
2-digit effective number.
• Units: pF.
• When the dielectric strength is indicated in AC, "AC" is included after the dieelectric
strength value.
z
5
SC-CX101
SC-CX101 EXPLODED VIEW
SC-CX101 PARTS LIST OF EXPLODED VIEW
Parts for which "nsp" is indicated on this table cannot be supplied.
The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
Note: The symbols in the column "Remarks" indicate the following destinations.
E1C: China model JP: Japan model
EM : E2(Europe model), E3(U.S.A. & Canada model)
Ref. No. Part No. Part Name Remarks Q'ty New
1 00D 949 0062 905 BOX ASSY AA-110-009-01 1 *
2 00D 949 0063 001 NETWORK ASSY 67-000-177-01 1 *
3 nsp SCREW - 4
4 00D 949 0063 205 SPEAKER WF AA-000-052-01 1 *
5 00D 949 0063 302 SPEAKER TW AA-000-053-01 1 *
6 nsp SCREW - 10
7 00D 949 0063 409 NET ASSY AA-000-054-01 1 *
8 00D 949 0063 506 RATING LABEL for JP, E1C 60-002-301-01 1 *
8 949 544 0003 40D RATING LABEL for EM 60-002-301-11 1 *
9 00D 949 0063 603 JUMPER WIRE 61-000-889-01 2 *
3
2
1
WF (R/WHT)
TW (Y/WHT)
9
4
6
6
5
6
7
14
2
8
9
d
d
6
SC-CX101
SC-CX101 PACKING VIEW
SC-CX101 PARTS LIST OF PACKING & ACCESSORIES
Parts for which "nsp" is indicated on this table cannot be supplied.
The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
Note: The symbols in the column "Remarks" indicate the following destinations.
E1C: China model JP: Japan model
EM : E2(Europe model), E3(U.S.A. & Canada model)
Ref. No. Part No. Part Name Remarks Q'ty New
1 00D 949 0061 906 NONWOVENS SHEET 85-000-509-01 1 *
2 nsp POLY BAG - 2 *
3 00D 949 0062 109 SUPPLIED CORD SET 62-000-484-01 2 *
4 nsp POLY BAG - 1 *
5 00D 949 0062 303 FOOT 65-000-267-01 1 *
6 nsp S.S. LIST - 1
7 00D 949 0062 400 INSTRUCTION MANUAL for JP,E1C 87-001-237-01 1 *
7 949 541 0003 50D INSTRUCTION MANUAL for EM 87-001-324-01 1 *
8 00D 949 0044 509 POLY BAG 85-000-567-01 1
9 00D 949 0062 507 CUSHION(TOP) 80-000-694-01 1 *
10 00D 949 0062 604 CUSHION(BOTTOM) 80-000-694-11 1 *
11 00D 949 0062 701 INDIVIDUAL CARTON for JP,E1C 83-000-544-01 1 *
11 949 531 0003 60D INDIVIDUAL CARTON for EM 83-000-571-01 1 *
12 nsp LABEL - 1
13 00D 998 0010 905 POS LABEL for JP,E1C - 1 *
13 nsp EAN LABEL for EM - 2 *
14 nsp GUARANTEE CARD(M) - 1
15 00D 949 0050 603 FORM PLUG 54-000-104-21 2
16 nsp POLY BAG - 1
17 nsp CHINA LABEL for E1C - 1 *
18 nsp UPC LABEL for EM - 1 *
19 nsp CONTROL CARD for EM - 2 *
5
2
1
3
9
10
7
6
8
11
12
13
14
13
19
18
19
4
16
15
17
s
d
d
d
d
d
d
d
d
d
d
s
d
d
/
