Z17714 W17431 L07157
QUICK REFERENCE GUIDE
2017
Hytera Communications Corporation Limited.
Hytera Communications Corporation Limited.
Address: Hytera Tower,Hi-Tech Industrial Park North,9108#Beihuan Road,
Nanshan District,shenzhen,People’s Republic of China
PD56X DIGITAL PORTABLE RADIO
快速操作手册
PD560 数字手持终端
是海能达通信股份有限公司的注册商标或商标
2017 海能达通信股份有限公司。版权所有
地址：深圳市南山区高新区北区北环路9108号海 能 达大 厦
邮编：518057
服务 热 线：400-830-7020
http://www.hytera.com
811PD56000020
Welcome to the world of Hytera and thank you for purchasing this product. This manual
includes step-by-step procedures for use. To avoid bodily injury or property loss caused by
incorrect operation, please carefully read the Safety Information Booklet before use.
For detailed features and operations, please download the corresponding Owner's Manual at
http://www.hytera.com.
This manual is applicable to the following product:
PD56X Digital Portable Radio (X may represent 2, 5, 6, or 8).
Product Overview
Product Controls
Programmable Keys
You can request your dealer to program your radio to use the following keys as shortcuts to radio features: SK1,P1 key, P2 key, P3 key, P4 key, and P5 key.
Please consult your dealer for assignable radio features.
1
Basic Operations
Turning on or off the Radio
Adjusting the Volume
Checking the Battery Power
To check the battery power, press and hold the preprogrammed Battery
Power Indicator key. The following table lists the battery power
indications. The icon indicates that the battery runs low. In this case,
please recharge or replace the battery.
Icon LED Indication/Tone
The LED indicator glows green.
The LED indicator glows orange.
The LED indicator glows red.
The LED indicator glows red and an alert tone sounds.
Locking or Unlocking Keys and Knobs
When the keypad is not in use, it is recommended that you lock it to avoid
unintended operations.
To lock or unlock the keypad, do one of the following from the home
screen:
lPress the preprogrammed Keypad Lock key.
lLong press (2s by default) the P3 key.
2
To allow the keypad to be locked automatically, enable the Keypad Lock
feature as follows:
1. Press the OK/Menu key from the home screen, and then go to Settings
>Radio Set >Keypad Lock.
2. Select Enable, and then set Timed Set by pressing the Up or Down key.
In addition, you can go to Settings >Radio Set >Lockable Key to set
whether the corresponding keys and knobs still work when the keypad is
locked.
Selecting a Zone and Channel
The radio receives and transmits data and voice on the selected channel. A
zone is a group of channels within the same operational area. Before
selecting a channel, make sure that the current zone contains the channel.
To select a zone, do one of the following:
lPress the OK/Menu key, select Zone, and then select the required zone.
lPress the preprogrammed Zone Up or Zone Down key.
To select a channel, rotate the Channel Selector knob.
Status Indications
LCD Icons
Icon Radio Status
DM Direct Mode: The radio transmits and receives directly.
RM Repeater Mode: The radio transmits and receives
through a repeater.
TDMA
TDMA Direct Mode: If one time slot is occupied, the
radio can transmit and receive through the other time
slot.
The number of bars indicates the charge left in the
battery.
There is no signal.
The number of bars indicates the signal strength.
The radio is set at high power.
The radio is set at low power.
An accessory is connected.
The radio is in emergency mode.
The radio is roaming.
3
Icon Radio Status
The Scrambler or Encrypt feature is enabled.
The radio is scanning.
The radio stays on a non-priority channel.
The radio stays on priority channel 1.
The radio stays on priority channel 2.
The Voice Operated Transmit (VOX) feature is enabled.
The Monitor feature is enabled.
The speaker is turned on.
The Loudness and Quality Optimizer (LQO) feature is
enabled.
There is/are missed call(s).
There is/are unread short message(s).
The InBox is full.
A private call is in progress or a private contact is on the
contact list.
A group call is in progress or a group contact is on the
contact list.
An all call is in progress or an all call contact is on the
Icon Radio Status
contact list.
LED Indications
LED Indicator Radio Status
Flashes green Being turned on.
Glows green Receiving.
Glows red Transmitting.
Flashes orange slowly Scanning or roaming.
Flashes orange rapidly Working in emergency mode.
Glows orange
Call hang time: No voice is being transmitted or
received on the channel during a call. Within such
a period, you can press and hold the PTT key and
speak.
4
Call Services
When you are speaking during a call, keep the microphone about 2.5 to 5
cm away from your mouth. This ensures optimal voice quality on the
receiving radio.
Call on Digital Channel
You can initiate or receive the following types of calls on a digital channel:
lPrivate call: a call from an individual user to another individual user.
lGroup call: a call from an individual user in a group to all the other
members in the group.
lAll call: a call from an individual user to all the other users on the
current channel.
The radio must be authorized by your dealer for you to initiate an all call.
Initiating a Call
You can initiate a call in any of the following ways:
lPreset Contact
1. Rotate the Channel Selector knob to select the required channel.
2. Press and hold the PTT key to call the private contact, group
contact, or all call contact preset for the selected channel.
lContact List or Call Log
1. Press the OK/Menu key.
2. Go to Contact >Contact List /Favorite Contact or Call Logs >
Outgoing/Incoming/Missed >Outgoing List /Incoming List /
Missed List.
3. Press the Up or Down key to select the required contact.
4. Press and hold the PTT key to call the selected contact.
The radio displays , , and for an outgoing private call,
group call, and all call respectively.
Receiving and Responding to a Call
When receiving a call, you can listen to it without any operation.
The radio displays , , and for an incoming private call,
group call, or all call respectively.
You can press and hold the PTT key and speak within call hang time.
5
Call on Analog Channel
You can initiate or receive a call on an analog channel with or without
signaling.
Call Without Signaling
A call without signaling is a call initiated to all the other users on an analog
channel without signaling.
To initiate a call without signaling, do as follows:
1. Rotate the Channel Selector knob to select the required channel.
2. Press and hold the PTT key, and speak into the microphone.
Call With Signaling
A call with signaling is a call initiated to a specific contact on an analog
channel with signaling.
To initiate a call with signaling, do as follows:
1. Rotate the Channel Selector knob to select the required channel.
2. Press the OK/Menu key, and go to Contact >Contact List.
3. Select the target contact.
4. Press and hold the PTT key, and speak into the microphone.
Emergency Call
In case of emergency, you can initiate an emergency call to ask for help
from other personnel or the control centre.
This feature needs to be configured and enabled by your dealer. For details,
refer to the Emergency feature described in the corresponding Owner's
Manual.
Message Services
The Message feature allows you to send a quick text and receive, forward
or delete a message. This feature is available only on a digital channel.
Viewing a Message
To view a newly received message, directly press the OK/Menu key.
To view a received message or a sent message, do as follows:
1. Press the OK/Menu key.
2. Go to Message >InBox/OutBox >InBox List /OutBox List.
3. Select the required message.
Sending a Message
You can send a quick text message, forward a message from the InBox or
OutBox, and resend a message from the OutBox.
6
Sending a Quick Text Message
A quick text message is a frequently used message predefined by your
dealer. To send a quick text message, do as follows:
1. Press the OK/Menu key, and then go to Message >Quick Text.
2. Select the required quick text, and then press the OK/Menu key.
3. Select Send, and then select the target contact.
4. Press the OK/Menu key.
Forwarding a Message
To forward a message from the InBox or OutBox, do as follows:
1. Press the OK/Menu key.
2. Go to Message >InBox/OutBox >InBox List /OutBox List.
3. Select the required message, and then press the OK/Menu key.
4. Select Forward, and then select the target contact.
5. Press the OK/Menu key.
Resending a Message
To resend a message from the OutBox, do as follows:
1. Press the OK/Menu key.
2. Go to Message >OutBox >OutBox List.
3. Select the required message, and then press the OK/Menu key.
4. Select ReSend, and then press the OK/Menu key.
Deleting a Message
To delete a message from the InBox or OutBox, do as follows:
1. Press the OK/Menu key.
2. Go to Message >InBox/OutBox >InBox List /OutBox List.
3. Select the required message, and then press the OK/Menu key.
4. Select Delete, and then press the OK/Menu key.
To delete all messages from the InBox or OutBox, do as follows:
1. Press the OK/Menu key.
2. Go to Message >InBox/OutBox.
3. Select Delete All, and then press the OK/Menu key.
7
非常感谢您对我们产品的青睐！本手册旨在让您快速掌握终端的使用。
为了避免因不当操作而给您带来身体伤害或财产损失，请于使用终端前详细阅读《安
全信息手册》。
要获取终端功能和操作的详细信息，请访问我们的网站：http://www.hytera.com，在线
查看或下载配套的说明书。
本手册适用于以下机型：
PD560数字手持终端
熟悉产品
部件介绍
可编程按键
为了提升操作便利性，终端提供可编程按键是【SK1】键、【P1】键、【P2】键、【P3】键、【P4】键和【P5】键，具体功能及操作方法请咨询经销
商。
1
基本操作
开机与关机
调节音量
查看电量
如果经销商为终端设置了【电池电量提示】快捷键，那么您可以按住该
快捷键通过LED指示灯、提示音及电池电量图标查看电池剩余电量，松
开该快捷键取消查看电池剩余电量。当电池电量显示 图标，表示电
量不足，请尽快充电或者更换电池。
LED指示灯/提示音 电池电量图标
LED指示灯亮绿色
LED指示灯亮橙色
LED指示灯亮红色
LED指示灯亮红色，同时伴有低电提示音
键盘锁定与解锁
当您无需使用键盘时，可以锁定键盘以防误操作。您可以通过以下方式
来锁定或解锁键盘：
l自动键盘锁
待机界面下，按【确认/菜单】键选择“设置 >对讲机设置 >键
盘锁”菜单，开启或关闭自动键盘锁。
开启键盘锁功能后，在预设延时内，如果您没有任何操作或终端没
有收到语音和数据，终端将自动锁定键盘。
l快捷键/组合键
»长按【P3】键（默认为2秒）锁定或解锁键盘。
»按【键盘锁】快捷键锁定或解锁键盘。
2
您可以在主菜单中选择“设置 >对讲机设置 >可选锁
键”，增设键盘锁定范围，包含可编程按键、【信道选择】旋
钮、【电源开关/音量控制】旋钮及【PTT】键。
选择区域
区域是一个信道组，您可以将具有相同属性的信道列入一个区域中，便
于您对现有信道进行有效管理。终端支持32个区域，每个区域可以配置
16个信道。您可以通过以下两种方式选择区域：
l进入“区域”菜单后，按【上】/【下】键选择所需区域，然后按
【确认/菜单】键切换至所选区域。
l通过【区域上调】/【区域下调】快捷键切换至所选区域。
选择信道
信道是信号传输的通道。您可以通过旋转【信道选择】旋钮选择所需信
道。
状态指示
LCD图标
图标 产品状态
DM 直通模式：终端与终端之间直接通信
TDMA TDMA直通模式：时分多址直通模式，同一个数字信道可
以同时存在两路独立的呼叫
RM 中转模式：终端与终端通过中转台的转发进行通信
条数越多，电池电量越足
无信号
条数越多，信号越强
当前发射功率为低功率
当前发射功率为高功率
已连接附件
3
图标 产品状态
紧急报警状态
漫游状态
已开启扰频或加密功能
扫描状态
扫描停留于非优先信道
扫描停留于优先信道1
扫描停留于优先信道2
已开启声控功能
已开启监听功能
已开启扬声器
已开启音质音量优化器
图标 产品状态
有未接呼叫
接收到短消息，或者有未读短消息
收件箱的存储空间已满
l出现在呼叫过程中，表示正在进行个呼
l出现在联系人列表中，表示个呼联系人
l出现在呼叫过程中，表示正在进行组呼
l出现在联系人列表中，表示组呼联系人
l出现在呼叫过程中，表示正在进行全呼
l出现在联系人列表中，表示全呼联系人
LED指示灯
指示灯状态 产品状态
绿色闪烁 正在开机
绿色常亮 正在接收
红色常亮 正在发射
4
指示灯状态 产品状态
橙色慢闪 正在扫描或者漫游
橙色快闪 紧急状态
橙色常亮 呼叫建立成功，橙色常亮期间您可以按住
【PTT】键讲话
呼叫
为保证最佳接收音量，发射时请保持麦克风与嘴的距离为2.5厘米～5厘
米。
数字信道呼叫
您可以对当前数字信道上预设的联系人进行个呼、组呼或全呼（全呼权
限需要由经销商开启）。
l个呼是一对一的呼叫。
l组呼是一对多的呼叫。
l全呼是对当前数字信道上所有联系人发起的呼叫。
发起呼叫
发起 个呼时， LCD 显示屏显示 ；发起组呼时，LCD 显示屏显示
；发起全呼时，LCD显示屏显示 。
您可以通过以下操作方法发起呼叫。
l在待机界面，按住【PTT】键对当前数字信道上预设的个呼联系
人、组呼联系人或全呼联系人直接发起个呼、组呼或全呼。
l在“联系人”菜单选择“联系人列表”或“常用联系人”、在待机
界面【常用联系人列表】或【联系人列表】快捷键进入联系人列
表，选择个呼联系人、组呼联系人或全呼联系人，按【PTT】键发
起个呼、组呼或全呼。
l在主菜单中选择“呼叫记录”，进入已拨呼叫/已接呼叫/未接呼叫
列表，选择个呼联系人，按【PTT】键发起个呼。
l当经销商配置【一键呼叫】的呼叫对象为个呼联系人或组呼联系人
时，按【一键呼叫】快捷键后按【PTT】键发起个呼或组呼。
5
接听和回复呼叫
接收到个呼时，LCD显示屏显示 ；接收到组呼时，LCD显示屏显示
；接收到全呼时，LCD显示屏显示 。您无须任何操作即可接
听呼叫。
通话过程中，在对方讲话完毕后，您可以按住【PTT】键回复。
结束呼叫
当双方无人按【PTT】键讲话，超过呼叫保持时间时，终端将结束呼
叫。
模拟呼叫
模拟呼叫是在模拟信道上发起的呼叫。
无信令呼叫
无信令呼叫是指在不带信令的信道上发起的呼叫，呼叫对象为处在该信
道上的所有用户。
旋转【信道选择】旋钮选择所需发起呼叫的模拟信道，按住【PTT】键
可以发起无信令呼叫。
有信令呼叫
有信令呼叫是指在带信令的信道上对目标联系人发起的呼叫。信令类型
分为HDC1200、五音以及两音，HDC1200信令可兼容MDC1200，可由
经销商预先设置，通过编解码实现呼叫。
各信令类型对应的操作方法相同。在主菜单选择“联系人 >联系人列
表”或按【联系人列表】快捷键，选择HDC1200联系人、五音联系人或
两音联系人，按【PTT】键进行发码，LED灯红色常亮，终端响提示
音，LCD显示屏显示呼叫图标。当终端收到匹配的信令时，无需执行任
何操作即可进行解码，LED灯绿色常亮。
紧急报警
紧急报警是指遇到紧急情况时，终端可以发起紧急报警向同伴或控制中
心寻求帮助。紧急报警具有最高优先权，无论终端处于发射或接收状
态，都可以进行报警。
紧急报警功能需由经销商为您配置和开启，详情请参阅终端配套的《说
明书》。
短消息
您可以通过短消息发送快捷文本，转发和删除收件箱和发件箱中的短消
息。
查看短消息
l即时查看
收到短消息时，按【确认/菜单】键查看详细内容。
l通过菜单
6
在“短消息”菜单中选择收件箱或发件箱，再选择待查看的短消
息，按【确认/菜单】键查看详细内容。
发送短消息
发送快捷文本
快捷文本是由经销商为终端预设的常用文本消息。您可以通过以下操作
步骤发送快捷文本至目标联系人。
1. 在“短消息”菜单中选择“快捷文本”，选择待发送的快捷文本。
2. 按【确认/菜单】键选择“发送”，选择目标联系人。
3. 按【确认/菜单】键发送该快捷文本。
转发短消息
1. 在“短消息”菜单中选择“发件箱”或“收件箱”，选择待转发的
短消息。
2. 按【确认/菜单】键选择“转发”，选择目标联系人。
3. 按【确认/菜单】键发送该消息。
重发短消息
在“短消息”菜单中选择“发件箱”，再选择待重发的短消息，按【确
认/菜单】键发送该消息。
删除短消息
1. 在“短消息”菜单中选择“收件箱”或“发件箱”，再选择待删除
的短消息。
2. 按【确认/菜单】键选择“删除”，LCD界面弹出提示框。
3. 按【确认/菜单】键删除该消息。
7
Z17714 W17431 L07157
QUICK REFERENCE GUIDE
2017
Hytera Communications Corporation Limited.
Hytera Communications Corporation Limited.
Address: Hytera Tower,Hi-Tech Industrial Park North,9108#Beihuan Road,
Nanshan District,shenzhen,People’s Republic of China
PD56X DIGITAL PORTABLE RADIO
快速操作手册
PD56X 数字手持终端
是海能达通信股份有限公司的注册商标或商标
2017 海能达通信股份有限公司。版权所有
地址：深圳市南山区高新区北区北环路9108号海 能 达大 厦
邮编：518057
服务 热 线：400-830-7020
http://www.hytera.com
811PD56000020
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
