E10F
Subminiature Earset Microphone
General Description
The Superlux E10F is a professional subminiature earset microphone ideal
for speech and other applications. It offers higher gain before feedback than
lavaliere microphones. Delivering exceptional speech clarity, the E10F is
ideal for corporate presentations, houses of worship, A/V conferencing and
live sound reinforcement. Available in two color options, the E10F provides
outstanding clarity in an extremely comfortable, over the ear design.
Using With Other Bodypack Transmitters
When connecting the microphone to anything
other than a Superlux wireless bodypack, make
sure the device provides a regulated +5V
DC(100 μA minimum) through transparent color
wire.
Windscreen
• The included windscreen provides plosive
and wind protection.
• Fit windscreen over cartridge.
• To remove, simply lift windscreen over
capsule.
Wearing the Earset Microphone
Fit the earset over the ear with the ear
support piece placed behind the earlobe.
The wire extends over the ear to the tip
of the mouth. Adjust the earset with
small bends. Do not bend the boom arm
beyond 20°.
Specifications
• Transducer Type: Electret Condenser
• Polar Pattern: Omnidirectional
• Frequency Response: 20 - 20,000 Hz
• Sensitivity (open circuit voltage, @ 1 kHz, typical) : -37dBV/Pa
• Maximum SPL: 110 dB SPL, 1500 Ω load, 1 kHz at 1% THD
• Signal-To-Noise Ratio: 77 dB
• Current Consumption: 0.1 mA typical@5V
• Self Noise (equivalent SPL, A-weighted, typical): 17 dB
• Voltage Range: +1.5 - 5 V DC
• Weight: 2.5 g (0.09 oz)
• Dimensions:
Microphone: 6 mm (0.24”) long; 4 mm (0.16”) diameter
Boom: 98.5 mm (3.88”) long; 1 mm (0.039”) boom diameter
• Cable Length: 1.4 meter (4.59 ft)
Features
• Subminiature, omnidirectional cartridge offers superior speech clarity
and enhanced plosive protection with no proximity effect
• Model variations terminated with different connectors allow for
connectivity to a variety of wireless bodypack transmitters
• Extremely lightweight, comfortable, flexible design is stable and easy to
place over either ear
• Matte black and beige color options available
• Includes carrying case, two windscreens, two element covers, moisture
guard and collar clip
Model No. Color Connector
E10F/BE Beige
E10F/BK Black
E10FTQG/BE Beige
E10FTQG/BK Black
Terminated for Superlux VT7 bodypack
transmitter using 3.5 mm (1/8”)connector
Terminated for Superlux VT7 bodypack
transmitter using 3.5 mm (1/8”)connector
Terminated for Superlux UT2 bodypack
transmitter and Shure® wireless systems using
TA4F-type connector
Terminated for Superlux UT2 bodypack
transmitter and Shure® wireless systems using
TA4F-type connector
Function Wire Color
Pin 1 Ground/Shield Shield
Pin 2 Bias + In Transparent
Pin 3 Mic Audi White
Pin 4 N/A N/A
E10FTQG/BE & E10FTQG/BK for Superlux UT2 bodypack transmitter
E10F/BE & E10F/BK for Superlux VT7 bodypack transmitter
sleeve ring tip
Function Wire Color
Sleeve Ground/Shield Shield
Ring Bias Transparent
Tip Mic Audio White
P/N: LB100E10F02SU 2014 JAN
13mm
(.5 in.)
Furnished Accessories
• Two windscreens
• Collar clip
• Moisture guard
• Carrying case
Notice: Specifications are subject to change without notice. For more information,
please visit www.superlux.com.tw
Frequency Response Chart
E10F/BE
E10F/BK
E10FTQG/BE
E10FTQG/BK
E10FTQG/BE E10FTQG/BKSuperlux UT2
E10F/BE E10F/BK Superlux VT7
P/N: LB100E10F02SU 2014 JAN
13mm
(.5 in.)
-
1
-
2
