40673312 1MP
1.
2.
3.
©2005
UM-3EX_leaf_j 3 ページ ２００５年９月２６日 月曜日 午後１時２９分
40673312 1MP
Attaching the Ferrite Core
You must attach the ferrite core before using the UM-3EX.
If you connect the UM-3EX to your computer, you must attach the included ferrite
core.
This is for the purpose of preventing electromagnetic noise; do not remove it.
fig.ferraite-1
1.
Attach the ferrite core to the UM-3EX’s
USB cable.
* You must attach it near the UM-3EX.
fig.ferraite-2
2.
Wrap the USB cable around the ferrite
core; one turn is enough.
fig.ferraite-3
3.
Press the halves together until they click
shut.
* Be careful not to pinch your fingers when attaching the ferrite core.
* Do not damage the cable by pinching it excessively with the ferrite core.
Copyright ©2005 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Ferrite core
UM-3EX_leaf_e 3 ページ ２００５年９月２６日 月曜日 午後１時５２分
/