FT-100
Fire Training Fog Machine
User Manual
- English
-中文
© 2023 Antari Lighting and Effects Ltd.
0
1. Introduction ................................................................................................................................................. 1
2. Safety Information ....................................................................................................................................... 1
3. Package Contents & Inspection ................................................................................................................... 2
4. Machine Details ........................................................................................................................................... 3
5. Technical Label Information ........................................................................................................................ 3
6. Fog Fluid...................................................................................................................................................... 3
7. Setting and Manual Operation ..................................................................................................................... 4
8. Control Settings ........................................................................................................................................... 4
9. DMX Connection ........................................................................................................................................ 5
10. WTR-20 Wireless Remote (Standard) ......................................................................................................... 5
11. Z-3 Cable Remote (Optional) ...................................................................................................................... 6
12. Service and Maintenance ............................................................................................................................. 6
13. Technical Specifications .............................................................................................................................. 7
14. Warranty Disclaimer .................................................................................................................................... 7
15. Machine Dimension ..................................................................................................................................... 8
1. 前言 ............................................................................................................................................................. 9
2. 安全注意事項 ............................................................................................................................................. 9
3. 包裝內容與檢查 ....................................................................................................................................... 10
4. 機器訊息 .................................................................................................................................................... 11
5. 技術標籤資訊 ............................................................................................................................................ 11
6. 煙霧水 ........................................................................................................................................................ 11
7. 設定與手動操作說明 ............................................................................................................................... 12
8. 控制設定 ................................................................................................................................................... 12
9. DMX 說明 ................................................................................................................................................. 13
10. WTR-20 無線控制器(標配) ..................................................................................................................... 14
11. Z-3 有線控制器(選配) .............................................................................................................................. 14
12. 維護和保養 ............................................................................................................................................... 15
13. 技術規格 ................................................................................................................................................... 15
14. 保固聲明 ................................................................................................................................................... 15
15. 機器尺寸圖 ............................................................................................................................................... 16
Appendix I – Grounding Instruction.................................................................................................................. 17
1
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at
all time. The manual includes how to install and operate the machine under safe condition and explain all the labels
printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER
If the danger is not avoided, it will cause death or serious injury
WARNING
If the warning is not heeded, it can cause death or serious injury.
CAUTION
If the precaution is not taken, it may cause minor or moderate injury.
DANGER
Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may
cause serious consequences.
Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of
electrocution. For grounding instruction, please refer to Appendix I on page 17.
Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
When operating the machine, do not point at people, animals, or fire.
WARNING
Machine’s nozzle is extremely hot, please keep at least 50cm distance from the nozzle when the machine is
running.
Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space
around the machine and make sure there is no flammable gas or material nearby.
Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock
or result in fire.
The machine can only be operated by adults or professionals, is not intended for use by person with reduced
physical sensory, mental capabilities, or lack of experience and knowledge including children.
Do not leave the machine running unattended, make sure all powers are off when leaving.
Children should be supervised to ensure that they do not play with the machine.
Do not use the machine upside down or tilt it, it might cause damages or malfunction.
Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.
In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
CAUTION
Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or
moisture environment.
Please make sure the power outlet is not damaged or loose before plug in the power cord.
2
If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state
which could lead to overeat or malfunction.
Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using
original package)
The machine is for indoor use only.
Do not operate the machine in any area with unstable voltage.
If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant.
Do not contact any moving part.
Only use accessories recommended or sold by Antari.
Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Unplug from outlet before servicing or cleaning.
Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid
or additive, otherwise it may clog the heater and cause malfunction.
Before operating the machine, please read all warning labels on the machine, description as below;
Top Cover Printing
WARNING!
HOT NOZZLE!
KEEP AT LEAST 50 CM DISTANCE
REMINDER
USE ANTARI LIQUID ONLY OR ONLY USE DEALER RECOMMENED FOG FLUID.
NEVER ADD FLAMMABLE SUBSTANCES.
Back Cover Printing
WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE
USE ONLY WITH ADULT SUPERVISION
DO NOT OPERATE WITHOUT LIQUID
FOR INDOOR USE ONLY. KEEP DRY
NO USER SERVICEABLE PARTS INSIDE
3. Package Contents & Inspection
3.1 Package Contents
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct
model and all parts are included. If any part appears to be damaged or missing during transportation, please contact
your local dealer and return in original package for inspection.
1 x FT-100 Fire Training Fog Machine
1 x 6 Liter Fluid Tank
1 x WTR-20 Wireless Remote
1 x Neutrik powerCON Power Cable
1 User Manual or Scan QR Code on the Machine
3
3.2 Optional Accessories
Item Code
Description
Z-3
Cable Remote
4. Machine Details
01. Nozzle
06. Neutrik powerCON Connector
02. 6 Liter Fluid Tank
07. Remote Connector
03. W-2 Wireless Receiver
08. XLR 5-Pin Connector (DMX)
04. Power Switch
09. LCD Display
05. Breaker
10. Rotary Knob
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Fog Fluid
CAUTION!
Always turn off the power before filling the fluid tank. Do not add flammable
liquid to the fluid tank. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
Only the fog fluid manufactured by Antari can be used, do not mix or dilute the fog fluid. Due to improper
storage or using other fluid might clog the heater and cause malfunction.
The machine is tested and calibrated with the specific fog fluid to get the best performance.
Please empty the fluid in the tank before switching to another fluid to avoid mixing.
Only the essence manufactured by Antari can be used, and add according to the ratio recommended by Antari
(Recommended ratio is 1:1000), if using other essence or different ratio might clog the heater and cause
malfunction.
4
The warranty on your fog machine will be void if you use fog fluid not manufacture by Antari.
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open
space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Fill the fluid tank with Antari approved fog fluid, and make sure the tube is not twisted;
Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and
make sure the power outlet is the correspond to the rated voltage for the machine;
Step 4. Turn on the machine, warm up process takes approximately 8.5 minutes. Once the machine has reached
operating temperature, the LCD display will show “Ready To Fog”. Now the machine is ready for
operation;
Step 5. Please refer to “8. Control Settings” for operating instruction;
Step 6. To turn off the machine, please make sure the machine is not operating then turn of the power. If you will
not use the machine a long period of time, please remove the power cord.
8. Control Settings
FT-100 Fire Training Fog Machine can be operated in the following modes. The machine can only accept 1 type of
signal at a time. When using different control modes at the same time, the machine will work according to built-in
control priority as follow:
Manual
Timer
DMX512
Wireless
Cable Remote
8.1 Control Panel Description
[TIMER] knob Middle is LCD Display [VOLUME] knob
Fogging in Timer Mode
Rotary Knob
Operating Method
Action
TIMER knob (Left)
Press Once
Activate Timer Mode
VOLUME knob (Right)
Press Once
Deactivate Timer Mode
VOLUME knob (Right)
Rotate
Adjust Output Volume
Fogging in Volume Mode
Rotary Knob
Operating Method
Action
VOLUME knob (Right)
Press Once
Activate Volume Mode
VOLUME knob (Right)
Press Once
Deactivate Volume Mode
VOLUME knob (Right)
Rotate
Adjust Output Volume
5
Menu and Setting
Rotary Knob
Operating Method
Action
TIMER knob (Left)
Press and Hold for 3 seconds
Enter Setting Menu
TIMER knob (Left)
Rotate
Scroll Through Menus
TIMER knob (Left)
Press once
Enter/Confirm Selection
TIMER knob (Left)
Rotate
Adjust for Preferred Value
VOLUME knob (Right)
Press once
Return to Previous Page
8.2 Menu Options Description
Options
Description
Timer Interval xxx S
Set Interval Time from 5-200 sec
Timer Duration xxx S
Set Duration Time from 1-200 sec
Timer Output xxx%
Set Output Volume from 1-100%
Volume Output xxx%
Set Output Volume from 1-100%
DMX512 Address:xxx
Set DMX Address from 001-512
Wireless ON
Turn ON/OFF Wireless Function
Fluid Sensor Set ON
Turn ON/OFF Fluid Sensor
W-DMX Power
Turn ON/OFF W-DMX Function
Run Last Setting OFF
Turn ON/OFF Memory Mode (Turn ON, the machine will remember last setting)
Keypad Sound
Turn ON/OFF Rotary Knob Sound
Wireless Detect Pair
Pair or Unpair Wireless Remote
Nonstop Burst OFF
Turn ON/OFF Nonstop Burst Function (Turn ON, continous fogging nonstop)
9. DMX Connection
9.1 DMX Connector Pin Assignment
This machine has a XLR 5-Pin connector for DMX connection. The diagram below indicates pin assignment
information;
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
**There is a protection cap on DMX IN, please
remove it with your finger before operation.
9.2 DMX Channel Function
1 Channel Mode
DMX Value Range
Function
Channel 1
Fog Output Level
0 – 4
Off
5 – 255
1 – 100%
10. WTR-20 Wireless Remote (Standard)
WTR-20 Wireless Remote is a standard accessory for FT-100 Fire Training Fog Machine, it included a W-2
wireless transmitter and a W-2 wireless receiver (Installed on the Machine), it’s ready to use. If you encounter any
problem, please contact your local Antari dealer for assistant.
6
10.1 W-2 Wireless Transmitter & Receiver
Battery：27A 12V
Effective Range：The effective range is approximately 50
meter, depends on actual condition, it may vary.
If effective range is significantly shorter, please change battery.
W-2 wireless transmitter has 4 buttons, each function as follow:
W-2 Wireless Transmitter
W-2 Wireless Receiver
(Installed on the Machine)
Button
Function
[A]
Start Fogging
[B]
Stop Fogging
[C]
Increase Fog Output
[D]
Decrease Fog Output
10.2 Pair & Unpair
Each receiver can pair up to 5 transmitters, please follow the steps below to pair or unpair the transmitter;
Step 1. Press and hold the [TIMER] knob for 3 seconds to enter menu;
Step 2. Rotate the [TIMER] knob to [Wireless Detect];
Step 3 Start to pair or unpair the transmitter according to the instruction.
11. Z-3 Cable Remote (Optional)
Z-3 Cable Remote is an optional accessory for FT-100 Fire Training Fog Machines, please see instruction below;
1. Plug the cable remote to the connector on the back of the machine, red indicator light on (Power);
2. Press the switch (Orange Indicator Light On); turn the knob to adjust the output to start fogging;
3. Press the switch (Orange Indicator Light Off), or turn the knob to far left to stop fogging.
** If you encounter any problem, please contact your local Antari dealer for assistant
12. Service and Maintenance
DANGER
Disconnect the power cord before starting maintenance operation!
Always keep the machine clean and dry.
Can use air compressor, vacuum or a soft brush to remove the dust on the machine.
Can use a slightly damp cloth to clean the casing.
Before store the machine, please make sure the machine is completely cool down to avoid moisture inside
causing malfunction.
It is recommended to run the machine at least once a month in order to maintain the machine’s best
performance and output condition.
7
Excessive dust and build up liquid residue will reduce the performance and cause overheat.
12.1 Breaker Reset
Please follow the instructions below to reset the breaker;
Step 1. Disconnect AC power
Step 2. Flip break back to position
Step 3. Turn on machine for testing
**If the breaker still jumps off after reset, please contact your local Antari dealer for
assistance.
Breaker Specification
120V = 15A 250V
240V = 7A 250V
13. Technical Specifications
FT-100
Input Voltage
US Model: AC 100-120V, 50/60Hz 13.0A
EU Model: AC 220-240V, 50/60Hz 6.5A
Rated Power
120V 1500W
240V 1450W
Warming-up Time
8.5 minutes (approx.)
Fluid Consumption
100 ml/min (100% output)
Fluid Tank Capacity
6 Liters (1.59 Gallon)
Compatible Fluid
Antari FLP Fire Training Fog Fluid
Ambient Temp. Range
0°C – 40°C (32°F – 104°F)
Control Methods
Manual、Timer、DMX512、Wireless、Cable Remote (Optional)
Interface
XLR 5-Pin Connector (DMX)、Neutrik powerCON Connector (Power)
DMX Channels
1 Channel
Included Accessories
WTR-20 Wireless Remote
Optional Accessories
Z-3 Cable Remote
Dimension
L 580 W 279 H 331 mm (L 22.83 W 10.99 H 13.03 inch)
Weight
14.6 kg (32.19 lbs.)
14. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
8
15. Machine Dimension
9
中文使用說明書
1. 前言
在操作本機器之前，請務必仔細詳閱本說明書然後請將本說明書放置在機器使用者可隨時查閱之處存放。
此說明書包含如何安全的安裝及操作本機器以及說明所有在機器上的標示。如果您有任何操作上的問題，
請立即聯繫當地的 Antari 經銷商尋求協助。
2. 安全注意事項
危險
若不確實避免這些指示，可能導致嚴重人身傷害甚至死亡。
警告
若不確實遵循這些指示，可能導致嚴重人身傷害甚至死亡。
注意
若不確實注意這些指示，可能導致人身傷害甚至死亡，嚴重程度視情況而定。
危險
請務必使用正確電壓。如果使用錯誤電壓，可能會遭受危險的電擊燒傷或更嚴重的後果。
請務必將機器連結到有保護的電路，並確保有正確的接地，以避免觸電的危險。關於接地方式請參考
第17 頁附錄 I。
請勿在捆綁電源線的情況下使用，可能會發熱導致火災。
操作機器時請 勿 將 機 器 對 著 人 體 、動物或火 焰使用。
警告
機器的噴嘴非常燙。當機器工作時，請遠離噴嘴 50 公分以上。
請於堅固、平坦、穩定且通風良好的表面上使用機器。請勿遮蓋機器散熱部份，機器周邊至少應保留
50 公分的空間並確認附近沒有易燃性物質或可揮發性氣體。
請勿隨意拆卸、修理或改造機器，這可能會導致機器故障、損壞、觸電危險或造成火災。
本機器僅限有行為能力之成人或專業人員操作，不預期提供生理、感知、心智能力、經驗或知識不足
者之使用者(包含孩童)使用本機器。
請勿在無人看管時讓機器運作，並 於 外 出 離 去 時 確 實關閉 電 源 。
孩童應受監督，以確保孩童不能操作或嬉戲玩本機器。
請勿將機器倒放或傾斜使用，可能導致機器動作不正常或損壞。
請將液體存放在室內孩童無法取得之處，保持通風及避免陽光直射。如果有觸碰眼睛或誤食機器，請
立即尋求醫生的協助。
注意
本機器無防水設計，請隨時保持機器乾燥，嚴禁將其潑水、浸水、淋雨或放在潮溼的環境。
在插 入 電 源 插 座前 ，請確認電 源 插 座無損壞或鬆動。
10
若電源線損壞，必須使用原廠電源線或組件進行更換，否則將導致保固無效。
請在使用機器之前，先填裝好煙霧水，避免機器幫浦空轉過熱造成損害。機器在搬運前或使用完畢
後，請清空油桶。
在運輸本機器前，請確認機器的油箱已清空並且包裝完整。(建議使用原廠包裝)
本產品僅限室內使用。
請勿在電壓不穩定的地區使用本機器。
如果機器出現異常聲音或有任何不正常現象時，請立即停止工作，將電源關閉及拔下機器電源線，並
請聯繫當地的 Antari 經銷商尋求協助。
請勿觸碰機器內部運轉零件。
只能使用原廠建議或販售之配件。
請確認機器不在使用的狀態下電源已關。如果長時間不使用機器，請拔掉電源線。
關閉機器時，將控制開關轉到關閉的位置，然後再將插頭從插座拔除。
拔除電源線時，請抓住插頭不是電線。
在保養及清潔前，請把電源線從插座拔除。
在電線或插座有損毀、機器故障或有掉落或損壞的情形發生時，請勿操作機器。請將機器送回最近的
維修站，做檢查、維修及電源或機械的調整。
為確保機器的使用壽命，請使用 Antari 原廠製造之煙霧水，勿使用其它非 Antari 原廠製造煙霧水或添
加劑，否則可能會導致電熱管阻塞和故障。
在使用本機之前，請詳細閱讀機器上的警語標示，說明如下：
上蓋印刷
WARNING! 警告!
HOT NOZZLE! 出煙口高溫!
KEEP AT LEAST 50 CM DISTANCE 請保持至少 50 公分的距離
REMINDER
USE ANTARI LIQUID ONLY OR ONLY USE DEALER RECOMMENED FOG FLUID.
使用原廠或經銷商建議煙霧水
NEVER ADD FLAMMABLE SUBSTANCES. 請勿加入可燃物質
前蓋印刷
WARNING! 警告!
DISCONNECT POWER BEFORE CHANGING FUSE. 更換保險絲前請務必斷開電源
USE ONLY WITH ADULT SUPERVISION. 僅在成人監督下使用
DO NOT OPERATE WITHOUT LIQUID. 請勿在沒有液體的情況操作本機台
FOR INDOOR USE ONLY. KEEP DRY. 僅限室內使用 請保持乾燥
NO USER SERVICEABLE PARTS INSIDE. 內部無使用者可維修之零配件
3. 包裝內容與檢查
在收到機器後，請立即小心地打開包裝紙箱，檢查所有內容，確認您所購買的機型及配件。如果有任何部
件因運輸過程出現損壞或缺少，請立即連絡經銷商，並以原包裝退回檢查。
3.1 包裝內容
1 x FT-100 消防演練煙霧機
1 x 六公升油桶
1 x WTR-20 無線控制器
1 x Neutrik powerCON 電源線
1 x 說明書或掃描機身 QR CODE
11
3.2 選配說明
品項
描述
Z-3
有線控制器
4. 機器訊息
01. 噴煙口
06. Neutrik powerCON 連接頭
02. 六公升油桶
07. 控制器接頭
03. W-2 無線接收器
08. XLR 5-Pin 連接頭(DMX)
04. 電源開關
09. 液晶顯示器
05. 斷路器
10. 控制旋鈕
5. 技術標籤資訊
使用本機器前，請詳閱技術標籤上的訊息
1. 機器型號
5. 斷路器/保險絲
2. 工作電壓
6. 說明書 QR CODE
3. 頻率
7. 機器流水序號
4. 瓦特數
6. 煙霧水
危險
將液體加入機器之前，請務必先拔除電源線。請勿添加易燃液體。如果發現液體
流入機器內部，請洽 Antari 原廠或其經銷商尋求協助。
僅能使用 Antari 原廠製造之煙霧水，不可混用或稀釋。若因保存不當而變質或使用非原廠煙霧水，將
可能造成電熱管堵塞而導致機器故障。
本機器是使用專屬的煙霧水做測試與校正來取得最佳的效能。
如需更換另一種液體，請在使用前，先將油桶中的液體清空，以避免混合。
12
僅能使用 Antari 原廠製造之香精，並依照原廠建議比例添加(原廠建議比例為 1:1000)，如果使用非原
廠的香精或比例添加有誤，將可能造成電熱管阻塞而導致機器故障。
如果使用非原廠製造之煙霧水或香精而導致煙霧機損壞將不在保固範圍內。
7. 設定與手動操作說明
警告
機台掉落可能會造成嚴重傷害，請確保本機台安裝牢固且不會掉落。
步驟1. 將機器平放在堅固、平坦、穩定且通風良好的表面上，機器周圍至少應保留 50 公分的空間並確
認附近沒有易燃性物質或可揮發性氣體;
步驟2. 使用 ANTARI 原廠專用煙霧水注入機器所附的油桶，並注意不要折到油管;
步驟3. 將機器連接電源，連接之前，確認機器背後技術標籤上所標示要求功率，是否與電源插座相符;
步驟4. 啟動機器電源後，使機器開始加熱。機器加熱到可工作溫度大約需要 8.5 分鐘。當機器達到工作
溫度時，螢幕會顯示“Ready to Fog”，表示機器已經準備好可進行操作;
步驟5. 請參照”8.控制設定”來操作機器;
步驟6. 需關閉本機時，請確認機器已停止運轉，再將電源開關關閉即可，長時間不使用時請移除電源
線。
8. 控制設定
FT-100 消防演練煙霧機可以使用下列操作模式，機器每次接受一種訊號。當同時間使用多種訊號時機器將
根據原廠內建訊號的優先順序來進行工作:
手動控制
定時控制
DMX512
無線控制
有線控制
8.1 控制面板說明
左方為 TIMER 旋鈕 中間為液晶顯示器 右方為 VOLUME 旋鈕
定時模式
旋鈕
操作方式
動作
TIMER 旋鈕 (左方)
按一下
啓動 TIMER 模式
VOLUME 旋鈕 (右方)
按一下
關閉 TIMER 模式
VOLUME 旋鈕 (右方)
旋轉
調整煙霧輸出量
輸出量模式
旋鈕
操作方式
動作
VOLUME 旋鈕 (右方)
按一下
啟動輸出量模式
VOLUME 旋鈕 (右方)
按一下
關閉輸出量模式
VOLUME 旋鈕 (右方)
旋轉
調整煙霧輸出量
13
設定選單
旋鈕
操作方式
動作
TIMER 旋鈕 (左方)
按住約 3秒鐘
進入設定選單
TIMER 旋鈕 (左方)
旋轉
瀏覽清單
TIMER 旋鈕 (左方)
按一下
確定
TIMER 旋鈕 (左方)
旋轉
調整數值
VOLUME 旋鈕 (右方)
按一下
返回前一頁
8.2 選單說明
選項
設定值
Timer Interval xxx S
設定時間間隔 5 – 200 秒
Timer Duration xxx S
設定煙霧輸出時間 1 – 200 秒
Timer Output xxx%
設定定時模式的煙霧輸出量 1 – 100%
Volume Output xxx%
設定輸出量模式的煙霧輸出量 1 -100%
DMX512 Address:xxx
設定 DMX 地址: 001-512
Wireless ON
開啟/關閉 無線功能
Fluid Sensor Set ON
開啟/關閉 油量偵測器
W-DMX Power
開啟/關閉 無線 DMX 功能
Run Last Setting OFF
開啟/關閉 記憶模式(選擇 ON 機器會記錄最後一次設定)
Keypad Sound
開啓/關閉 旋鈕按鍵音
Wireless Detect Pair
開啟/關閉 無線發射器配對
Nonstop Burst OFF
開啟/關閉 持續輸出功能(選ON，煙霧持續輸出不間斷)
9. DMX 說明
9.1 DMX 說明
本機提供 XLR 5-PIN 的DMX 連接頭。PIN 的接點說明如下;
Pin
功能
1
接地
2
數據-
3
數據+
4
NA
5
NA
**DMX IN 連接頭上有一個保護蓋，操作前，請
用手指撥開即可將其取下。
9.2 DMX 通道功能
1 通道模式
DMX 數值範圍
功能
通道 1
煙霧輸出量
0-4
關閉
5-255
1-100%
14
10. WTR-20 無線控制器(標配)
WTR-20 無線控制器包含一個 W-2 無線發射器及 W-2 無線接收器(已經安裝在機器上)，是 FT-100 消防演練
煙霧機的標準配件，可直接使用。如果遇到任何困難與問題，請與當地的 Antari 經銷商尋求協助。
10.1 W-2 無線發射器&無線接收器
發射器：使用 27A 12V 電池
收發距離：有效距離為 50 公尺，實際收訊狀況根據現場環境
因素而有所不同。
如果發現有效距離明顯減少時，請更換電池。
W-2 無線發射器配有 4個按鈕，控制功能為：
W-2 無線發射器
W-2 無線接收器
(已安裝在機器上)
按鈕
功能
[A] 鍵
開始噴煙
[B] 鍵
關閉噴煙
[C] 鍵
增加煙霧輸出量
[D] 鍵
減少煙霧輸出量
10.2 配對 & 取消配對
每個接收器可以配對最多 5個控制器，請參考下面步驟配對和取消配對控制器。
步驟 1：按住左邊[TIME]鍵3秒進入主選單;
步驟 2：旋轉[TIMER]鈕找到[Wireless Detect];
步驟 3：按照畫面指示來進行配對或取消配對。
11. Z-3 有線控制器(選配)
Z-3 有線控制器是 FT-100 消防演練煙霧機的選購配件，使用方法如下;
1. 將有線控制器插入機器後方的控制器接頭，紅色指示燈(電源)亮起;
2. 按下開關(橘燈亮起)，調整旋鈕，控制輸出量大小，開始噴煙;
3. 按下開關(橘燈熄滅)或旋扭轉到最左邊，停止噴煙。
**如果有任何問題，請聯繫當地的 Antari 經銷商尋求協助。
15
12. 維護和保養
危險
維修保養之前，請務必拔除電源線！
隨時保持機器清潔及乾燥。
可以使用空氣壓縮機、吸塵器或軟刷除去機器上的灰塵。
機殼可使用濕布擦拭。
在存放或收起機器前，請確認機器完全冷卻，避免機器內部潮濕導致故障。
建議每月至少讓機器運轉一次，以保持機器處於最佳的性能和輸出條件。
機器上過多的灰塵、液體殘餘累積的髒污會降低機器工作性能，導致散熱不良。
12.1 重置電流斷路器
請根據下列步驟，重置電流斷路器。
步驟1. 關閉機器電源
步驟2. 將電流斷路器按至復歸的位置
步驟3. 重新開啟機器測試
**如果遇到任何困難與問題，請與當地的 Antari 經銷商尋求協助。
電流斷路器規格
120V = 15A 250V
240V = 7A 250V
13. 技術規格
FT-100
電壓
美規 : AC 100-120V, 50/60Hz 13.0A
歐規 : AC 220-240V, 50/60Hz 6.5A
額定功率
120V 1500 瓦
240V 1450 瓦
加熱時間
約8.5 分鐘
耗油量
100 毫升/分鐘 (100%輸出)
油桶容量
6公升 (1.59 加侖)
適用煙霧水
Antari FLP 消防專用煙霧水
適用環境溫度
0°C – 40°C (32°F – 104°F)
控制方式
手動控制、定時控制、DMX 512、無線控制、有線控制(選配)
DMX 512 通道
1個頻道
連接座
XLR 5-Pin 連接頭(DMX)、Neutrik powerCON 連接頭(主電源)
隨附配件
WTR-20 無線控制器
選購配件
Z-3 有線控制器
尺寸
長580 寬279 高331 公釐 (長22.83 寬10.99 高13.03 英寸)
重量
14.6 公斤 (32.19 磅)
14. 保固聲明
本公司保證我們的商品在一年內沒有材料和製作缺陷。我們在本保證下的義務和責任僅限於在原廠或當地
授權經銷商進行的維修或更換。我們對不當使用或用於非專門設計目的以外之用途不承擔任何責任。本保
固不適用於以任何方式在原廠或當地授權經銷商外修理、改動或組裝的任何商品，以便我們判斷影響其性
能，沒有受到誤用、疏忽或事故的影響，也沒有違反我們的任何商品操作印刷說明。本公司對於從我們這
邊購買的商品不會允許也不對於使用、銷售或修理任何產品有關的任何類型的任何損失或損害承擔責任。
16
15. 機器尺寸圖
17
Appendix I – Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in
sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal
screw.
C08FT1008
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
