1.
230 V 120 V 2
2. MUSIC Group
behringer. com Support
MUSIC Group
behringer. com Support
OnlineSupport
behringer.
com
3.
Audio Input
Type RF- l tered, servo-balanced input
Impedance42 kΩ balanced, 21 kΩ unbalanced
Nominal operating level -10 dBV / +4 dBu, switchable
Max. input level +22 dBu, balanced and unbalanced
CMR @ 1 kHz 50 dB typical
Audio Output
Type Servo-balanced output stage
Impedance 100 Ω, balanced, 50 Ω unbalanced
Max. output level +22 dBu balanced and unbalanced
Bandwidth 10 Hz to 100 kHz, +0 / -3 dB
THD @ +4 dBu 0.03% typical
Noise & hum, unity gain > 83 dBu (20 Hz to 20 kHz, unw
eighted)
Crosstalk @ 20 kHz -70 dB typical
CMR @ 1 kHz 50 dB typical
Crossover Section
Type 24 dB Butterworth lter
Corner frequenciesSwitchable (Music 500 Hz / Speech 2 kHz)
Compressor/Leveler Section
Type Multiband IKA compressor
Threshold control -40 to +20 dB
Leveler control OFF to 6
Ratio control 1:1 to 6:1
Output control -20 to +20 dB
Peak Limiter Section
Type Multiband IGC Peak Limiter
Level control 0 to +20 dB
Band limit LEDs Low and High band Peak LED limiter indicator s
Function Switches
In/Out switch DC-controlled “hard-bypass” relay
Indicators
Gain reduction meters 1/2/4/6/10/15/20/30 dB
In/Out level meters -30/-20/-10/ -5/0/+5/+10/+15 dB
LED indic ator for each function switch
Power Supply
Mains voltage 100 – 240 V~ 50/60 Hz
Power consumption 10 W
FuseT1.25 A H 250 V~
Mains connection Standard IEC receptacle
Physical
Dimensions (W x D x H) 445 x 192 x 50 mm (17.5 x 7.6 x 2.0")
Weight1.8 kg (4.0 lbs)
10 11MULTIBAND DYNAMICS PROCESSOR SPL3220