English
-9-
Function Setting
1. Turn on the DVR, press the Menu button to enter Video Setting interface.
2. To confirm the operation, press the Rec/Snap button and select by UP/DOWN button for the
following setting.
3. Press Menu button to exit after finishing all the settings.
4. Video Resolution: VGA (640 x 480 pixels) 720P (1280 x 720 pixels), 1080P (1920 x 1080
pixels).
5. Audio Recording: ON/OFF. If OFF, audio will not be recorded while video is recorded.
6. Motion detection: Choose ON/OFF.
When ON, it will record automatically if there is movement in front of the car, the recording time
is according to the setting time, e.g. setting two minutes as recording time, the recording time
will last two minutes if there is movement, stop recording if no movement after two minutes and
continue recording if there is still movement.
7. LCD Back light: 15 seconds/30 seconds /60 seconds/ON. When you select (15/30/60) seconds,
the LCD will turn off automatically after 15/30/60 seconds. If you select ON, the LCD will be on
all the time.
8. Date Stamp: Date & Time Stamp/No Stamp.
If you select No Stamp, the Video will not have a date and time display.