Disclaimer and Safety Instructions
免责声明和安全操作手册
Disclaimer and Warning
Please be sure to read this document carefully to understand your legal
rights, responsibilities, and safety instructions before using the product.
HoverAir X1 is a small smart flying camera. It is not a toy. Anyone who may
be unsafe when operating HoverAir X1 should not use this product. This
group of people includes but is not limited to:
1. Children at or under the age of 14; teenagers above the age of 14 and
below the age of 18 must be accompanied by parents or professionals to
operate HoverAir X1;
2.People under the influence of alcohol, medication, who have dizziness,
or are in a poor physical or mental state;
3.People in conditions that make them unable to safely operate HoverAir
X1;
In scenarios where the above group of people is present, user must
operate HoverAir X1 carefully.
Operate with caution in risky scenarios, e.g. crowd of perple, city
buildings, low flying height, near-water locations.
You should read the entire contents of this document, and operate
HoverAir X1 only after being familiar with the features of the product.
Failure to operate this product properly may result in property damage,
safety hazards, and personal injury. By using this product, you are deemed
to have understood, endorsed and accepted all the terms and contents of
this document.
The user commits to being responsible for his or her actions and all
consequences arising therefrom. The user promises to use the product
only for legitimate purposes, and agrees to all the terms and contents of
this document and any relevant policies or guidelines that may be
developed by Shenzhen Zero Zero Infinity Technology Co., Ltd.(hereinafter
referred to as “ZeroZeroTech”) .
ZeroZeroTech does not assume any loss caused by the user's failure to use
the product in accordance with this document, the User Manual, the
relevant policies or guidelines. In the case of compliance with laws and
regulations, ZeroZeroTech has the final interpretation of this document.
ZeroZeroTech reserves the right to update, revise or terminate this
document without prior notice.
免责声明与警告
请务必在使用产品之前仔细阅读本文档，了解您的合法权益、责任和安全说明。
HoverAir X1 是一款具有拍照以及摄像功能的小型飞行相机，并非玩具，任何操作
HoverAir X1 时可能导致出现不安全因素的人群不应使用本产品。该类人群包括
但不限于：
1. 14 周岁（含）以下的儿童；14周岁以上到18周岁的未成年人需在家长陪同或专业
人员指导下操作。
2.饮酒、用药、头晕乏力以及其他身体或精神状况不佳的人；
3.可能被某些情况影响从而导致无法安全操控Hover Camera X1 的人；
在有上述人群出现的场合，使用者务必谨慎操控Hover Camera X1飞行
其它谨慎操控飞行的情况：如人群、城市、飞行高度过低、临水区域等。
您应先阅读本文档全部内容，并且在熟悉产品的功能之后再进行操作HoverAir
X1。如果没有正确操作本产品，可能会造成财产损失、安全事故和人身伤害。一旦使用
本产品，即视为您已理解、认可和接受本文档全部条款和内容。
使用者承诺对自己的行为及因此而产生的所有后果负责。使用者承诺仅出于正当目
的使用本产品，并且同意本文档全部条款和内容及深圳零零无限科技有限公司（以下
简称“零零科技”）可能制定的任何相关政策或者准则。
零零科技不承担因用户未按本文档、《用户手册》、相关政策或准则的指引使用产
品所引发的一切损失。在遵从法律法规的情况下，零零科技享有对本文档的最终解释
权。零零科技有权在不事先通知的情况下，对本文档进行更新、改版或终止。
安全操作指南
● 飞行环境
HoverAir X1应在可正常飞行的环境下飞行。飞行环境限制包含但不限于：
1. HoverAir X1采用下置视觉定位，请注意以下条件：
·确保HoverAir X1距离地面的飞行高度不低于0.5m且不高于10m。
·避免夜间飞行，当地面亮度很低时(夜间)，视觉系统可能会失效。
·当地面纹理不清晰时，视觉定位系统可能会失效。纹理不清晰的情况包括大面
积纯色地面，水面或透明地面，强反光地面，光照剧烈变化的地面，底部有
移动的物体等。
·确保HoverAir X1的底部视觉传感器保持洁净。请勿遮挡传感器。请勿在粉尘/
水雾环境中飞行。
·请勿在地面高度落差较大的情况下飞行（如从高楼层的窗户飞出）。
2.请勿在大风(风速达到4级或以上)、下雨、下雪、雷电、有雾等恶劣天气飞行；
3.请勿在在0°C以下或40°C以上环境中飞行；
4.请勿在非法区域中飞行。非法区域详见“飞行法律规范与飞行限制”部分；
5.请勿在海拔2000米以上地区飞行；
6.在沙漠、沙滩等固体颗粒较多的环境中起飞要小心，避免固体颗粒进入飞行
器内部。
● 无线通信
当使用无线遥控功能时，HoverAir X1应在确保无线通讯可正常工作的条件下飞
行。请注意以下条件限制：
1. 确保在开阔空旷处操控HoverAir X1。
2.禁止在电磁干扰源附近飞行。电磁干扰源包括但不仅限于：Wi-Fi 热点、蓝牙
设备、高压电线、高压输电站、雷达站、移动电话基站和电视广播信号塔。若没
有按照上述规定选择飞行场所，HoverAir X1的无线传输性能将有可能受到干
扰影响。当干扰过大时，HoverAir X1可能无法正常工作。
● 飞行前检查
在使用HoverAir X1前，您应确保对机身、周边部件以及任何涉及HoverAir X1的相
关内容充分理解，并做好相应的检查工作。包括但不限于：
1. 确保HoverAir X1的电量充足；
2.展开HoverAir X1，确保HoverAir X1及其部件均可正常工作，包括但不限于保
护框、电池、螺旋桨、云台以及其他任何飞行相关部件；
Safety Instructions
● Flight Environment
HoverAir X1 should be flown in a normal flight environment. Flight
environment requirement includes but is not limited to:
1. HoverAir X1 adopts downward vision positioning system, please be aware
that:
· Make sure HoverAir X1 does not fly lower than 0.5m or higher than 10m
above ground.
· Do not fly at night. When the ground is too dark, vision positioning system
may not work well.
·Vision positioning system may fail if the ground texture is not clear. This
includes: large area of pure color ground, water surface or transparent area,
strong reflection area, area with drastically changing light condition, moving
objects below HoverAir X1, etc.
Make sure the downward vision sensors are clean. Do not block sensors. Do
not fly in dust/mist environments.
Do not fly when there is large height variance(e.g., flying out of the window
on high floors)
2. Do not fly in severe weather conditions including windy (wind exceeding
5.4m/s), rain, snow, lightning and fog;
3.Do not fly when environment temperature is below 0°C or above 40°C.
4.Do not fly in restricted zones. Please refer to“Flight Regulations and
Restrictions”for details
5. Do not fly over 2000 meters above sea level
6.Fly with caution in solid particle environments including desert and beach.
It could result in solid particle entering HoverAir X1 and cause damage.
● Wireless Communication
When using wireless functions, make sure that wireless communication is
working properly before flying HoverAir X1 Be aware of following limitations:
1.Be sure to operate the HoverAir X1 in an open space.
2.It is forbidden to fly near sources of electromagnetic interference.
Electromagnetic interference sources include, but are not limited to: Wi-Fi
hotspots, Bluetooth devices, high voltage power lines, high voltage power
stations, mobile phone base stations and television broadcast signal towers.
If the flight location is not selected in accordance with the above provisions,
HoverAir X1 wireless ransmission performance will likely be affected by
interference. If the interference is too large, HoverAir X1 will not work
normally.
● Pre-flight Inspection
3. 确保固件以及 App 已经更新至最新版本；
4. 确保已经认真阅读并了解《用户手册》、《 快速指南》等产品相关手册，确保熟悉
产品及其操作方式。
● 操作 HoverAir X1
确保正确操控 HoverAir X1，并时刻注意飞行安全。如果因使用者错误操作导致
HoverAir X1 故障、财产损失等，其后果将由用户自行承担。正确操控方法包括但
不限于：
1. 切勿靠近工作转动中的螺旋桨和电机；
2. 确保 HoverAir X1 的飞行环境。飞行过程中注意避开水面或雪地等镜面反射区域。
请保证飞行器在光照良好的开阔环境中飞行。具体细则详见“飞行环境”部分；
3. 当飞行器处于智能飞行模式时确保飞行环境开阔且无障碍物遮挡预设的飞行
轨迹。飞行过程中留意周围环境是否安全，并在可能发生任何安全问题时及时
停止飞行；
4. 拍摄重要照片或视频时请确保 HoverAir X1 处于正常工作状态且电量充足，确保
正确关闭 HoverAir X1，否则可能造成影像损坏或者丢失，零零科技对无法读取的
影像损失不承担任何责任；
5. 请正确操作云台，请勿在云台工作时对其施加外力；
6. 仅可使用 HoverAir X1 官方配件。使用非官方配件造成的任何后果，由您自行承担责任；
7. 请勿对 HoverAir X1 私自进行改装或拆解，如因私自改装或拆解造成的任何后
果，由用户自行承担责任。
● 其他安全事项
1. 不得在饮酒、吸毒、药物麻醉、头晕、乏力、恶心等其他身体状态不佳或精神状
况不佳的情况下使用本产品。
2. 禁止使用 HoverAir X1 向建筑物、人群或动物投掷、发射任何危险物体。
3. 请勿使用发生过严重飞行事故或飞行状态异常的飞行器。
4. 使用 HoverAir X1 时请务必尊重他人隐私，禁止使用 HoverAir X1 进行任何侵犯
他人隐私权、许可权等权利的行为。
5. 确保清楚理解当地无人机飞行相关的法律法规，禁止使用 HoverAir X1 进行任何
违法及不当的行为，包括但不限于间谍活动、军事行动以及其他非法工作。
6. 为确保安全，请勿将手指或异物放置于保护框中。因将手指或异物放置于保护框
中造成的任何后果，由用户自行承担责任。
Before using HoverAir X1 you should make sure that you fully
understand HoverAir X1, its peripheral components and anything involved
with HoverAir X1 Pre-flight inspection should include but is not limited to:
1.Ensure HoverAir X1 is fully charged;
2.Ensure that HoverAir X1 and its components are installed and work properly,
including but not limited to: prop guard, batteries, gimbal, propellers, and any
other flight related components;
3.Ensure the firmware and App have been updated to the latest version;
4.Ensure that you have read and understood the User Manual, Quick Guide and
related documents and are familiar with operations of the product.
● Operating HoverAir X1
Make sure that HoverAir X1 is properly operated and always pay attention
to flight safety. Any consequences such as malfunctions, property damage, etc.
due to user's incorrect operation, will be borne by the user. The correct methods
of operating HoverAir X1 include but are not limited to:
1.Do not approach the propellers and motors when they are working;
2.Please ensure that HoverAir X1 is flying in an environment suitable for vision
positioning system. Avoid reflective areas such as flying over water surfaces or
snowfields. Make sure HoverAir X1 is flying in open environments with good light
condition. Please refer to “Flight Environment” section for more details.
3.When HoverAir X1 is at auto flight modes, please make sure the environment is
open and clean, and no any obsticles that may block flight path. Please pay
attention to surroundings and stop flight before anything dangerous happens.
4.Please make sure HoverAir X1 is at good status and charged up before taking any
valuable videos or photos. Make sure to shutdown HoverAir X1 correctly, otherwise
media files may be damaged or lost. ZeroZeroTech is not responsible for media
file loss.
5.Please do not apply external force to gimbal or block gimbal.
6.Use official parts provided by ZeroZeroTech for HoverAir X1. Any consequencies
caused by using non-offical parts will be your sole responsibility.
7.Do not disassemble or modify HoverAir X1. Any consequencies caused by
disassemblling or modification will be your sole responsibility.
● Other Safety Issues
1. Do not operate this product in poor physical or mental conditions such as under
the influence of alcohol or drugs, drug anesthesia, dizziness, fatigue, nausea, etc.
2.Do not use HoverAir X1 to throw or launch any dangerous object towards
buildings, people or animals.
3.Do not use a HoverAir X1. which has experienced serious flight accidents or
abnormal flight conditions.
4.When using HoverAir X1 be sure to respect others’ privacy. It is forbidden to
use HoverAir X1 to conduct any violations of the rights of others.
5.Ensure that you understand the local laws and regulations related to drones.
It is forbidden to use HoverAir X1 to conduct any illegal and improper
behaviors, including but not limited to espionage, military operations and other
illegal work.
6. Do not stick finger or any other objects into HoverAir X1 protection frame
Any consequencies caused sticking into protection frame will be your sole
responsibility.
Disclaimer and Safety Instructions
免责声明和安全操作手册
V202307
