HP Color LaserJet Pro M253-M254 Printer series インストールガイド

タイプ
インストールガイド

HP Color LaserJet Pro M253-M254 Printer series は、家庭や小規模オフィスに最適なカラーレーザープリンターです。毎分最大21ページの高速印刷と、最大1200dpiの高解像度印刷が可能です。また、無線LANと有線LANに対応しており、モバイル端末からも簡単に印刷できます。さらに、自動両面印刷や、用紙カセットの増設など、ビジネスを効率化する機能も搭載しています。

HP Color LaserJet Pro M253-M254 Printer series は、家庭や小規模オフィスに最適なカラーレーザープリンターです。毎分最大21ページの高速印刷と、最大1200dpiの高解像度印刷が可能です。また、無線LANと有線LANに対応しており、モバイル端末からも簡単に印刷できます。さらに、自動両面印刷や、用紙カセットの増設など、ビジネスを効率化する機能も搭載しています。

1
ไท ............................ 10
한국어 .........................7
English.........................1
Tiếng Việt ................. 16
繁體中文.................. 13
Bahasa Indonesia ........4
Windows
1. Do not connect the USB cable before installing the software. The installation
process prompts to connect the cable at the appropriate time. If the cable is
already connected, restart the printer when installation prompts to connect
the cable.
2. Continue to “5. Download and install the software.”
OS X
1. For OS X, connect the USB cable between the computer and the printer
before installing the software.
2. Continue to “5. Download and install the software.”
Wireless network connection
(wireless models only)
Touchscreen control panels
1. To connect the printer to a wireless (Wi-Fi) network, on the printer control
panel, touch the Wireless button.
2. Touch Wireless Menu, and then touch Wireless Setup Wizard. Select the
network name from the SSID list, or enter the network name if it is not
listed.
3. Use the keyboard to enter the passphrase, and then touch the OK button.
4. Wait while the printer establishes a network connection.
5. On the printer control panel, touch the Network button. If an IP address
is listed, the network connection has been established. If not, wait a few
more minutes and try again. Note the IP address for use during software
installation. Example IP address: 192.168.0.1
2-line/LED control panels
1. To connect the printer to a wireless (Wi-Fi) network, make sure that the
printer, access point, and computer are turned on and that the computer is
connected to the wireless network.
2. A USB cable might be required during SW installation.
3. To print from a computer, continue with “5. Download and install the
software.” To print from a phone or tablet only, continue with “6. Mobile
printing (optional).”
Wired Ethernet network connection
(Optional)
Use a standard network cable.
1. Connect the network cable to the printer and to the network. Wait a few
minutes for the printer to acquire a network address.
2. Continue to “5. Download and install the software.”
www.hp.com/support/ljM253 www.register.hp.com
Color LaserJet Pro M253-M254
Getting Started Guide
USB connection directly between the
printer and the computer
Use an A-to-B type USB cable.
4.
Select the connection method
Manually congure the IP address
See the printer user guide for information on how to manually congure the
IPaddress www.hp.com/support/ljM253.
IMPORTANT:
Follow Steps 1 - 2 on
the printer hardware setup
poster, then continue
with Step 3.
3.
Initial setup on the control panel
After turning on the printer, wait for it to initialize. To navigate the 2-line control panel, use the
arrow buttons and the OK button. To navigate the touchscreen control panel, use touch, swipe,
and scroll gestures. Follow the prompts on the control panel to congure these settings:
Language
Location
Default Settings
Under Default Settings select one of these options:
Self-managed: Optimized default settings for most users that include guided setup and
conguration steps and automatic updates.
IT-managed: Optimized default settings for eet manageability.
Settings are fully customizable after initial setup.
NOTE: Select Print Information Page to print a page that instructs how to change the
default settings.
2
6.1
Connect the device to the wireless network
To print from a phone or tablet, connect the device to the same wireless network
as the printer.
Apple iOS devices (AirPrint): Open the item to print, and select the Action icon.
Select Print, select the printer, and then select Print.
Android devices (4.4 or newer): Open the item to print, and select the Menu
button. Select Print, select the printer, and select Print.
Some devices require downloading the HP Print Service plugin app from the
Google Play store.
Windows Phone: Download the HP AiO Remote app from the Windows Store.
Learn more about mobile printing
For further information on these and other operating
systems (Chrome/Google Cloud Print) go to
www.hp.com/go/LaserJetMobilePrinting or scan the
QR code.
5.
Download and install the software
6.
Mobile printing (optional)
Method 1: Download HP Easy Start (Windows and OS X)
1. Go to 123.hp.com/laserjet, and click Download.
2. Follow the on-screen instructions and prompts to save the le to the computer.
3. Launch the software le from the folder where the le was saved.
Method 2: Download from printer support website
(Windows and OS X)
1. Go to www.hp.com/support/ljM253.
2. Select Software and drivers.
3. Download the software for your printer model and operating system.
4. Launch the software le from the folder where the le was saved.
Method 3: Install from the printer CD
(Windows only)
1. Insert the printer CD into the computer.
2. Follow the on-screen instructions to install the software.
Install Notes
For more details about the software for the printer, see the install notes le on the
printer CD.
7.
Set up HP ePrint via email (optional)
Enable HP Web Services
2-line/LED control panels
1. After the printer is connected to the network, print a conguration page
and identify the printer IP address.
2. At the computer, open a web browser and enter the printer IP address into
the address line. The HP Embedded Web Server (EWS) opens.
3. Select the HP Web Services tab, and click the Enable button. The printer
congures the connection to the Internet, and then a message appears
indicating an information sheet will print.
4. Click the OK button. An ePrint page prints out. On the ePrint page, look for
the e-mail address that is automatically assigned to the printer.
Use HP ePrint via email to print documents by sending them as an email attachment to the printer’s email address from any email enabled device, even from devices that are
not on the same network.
To use HP ePrint via email, the printer must meet these requirements:
The printer must be connected to a wired or wireless network and have Internet access.
HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.
Touchscreen control panels
1. From the Home screen on the printer control panel, touch the Connection
Information button, and open the following menus:
• HP ePrint
• Settings
• Enable Web Services
2. Touch the OK menu item. The printer enables Web Services, and
then prints an information page. The information page contains a printer
code necessary to register the HP printer at HP Connected.
3. Go to www.hp.connected.com to create an HP ePrint account and complete
the setup process.
6.2
Wi-Fi Direct (wireless models only)
Wi-Fi Direct allows Wi-Fi capable devices, such as smart phones, tablets, or
computers, to make a wireless network connection directly to the printer without
using a wireless router or access point. Connect to the printer’s Wi-Fi Direct signal
the same way Wi-Fi capable devices are connected to a new wireless network
or hotspot.
Enable Wi-Fi Direct
1. 2-line control panels: On the printer control panel, press the OK button, and
then open the Network Setup menu.
Touchscreen control panels: From the Home screen on the printer control
panel, select the Connection Information button.
2. Open the following menus:
• Wi-Fi Direct
• Settings (touchscreen control panels only)
On/O
3. Touch the On menu item. Touching the O button disables Wi-Fi Direct printing.
For more information on wireless printing and wireless setup, go to
www.hp.com/go/wirelessprinting.
Discover the printer
1. From the mobile device, turn on the Wi-Fi, and search for wireless
networks.
2. Select the printer as shown on the printer control panel.
Example printer name: Direct-bb-HP M277 Laserjet
3
Wired (Ethernet) network connection (optional)
Verify that the printer is attached to the correct network port using a cable of the
correct length.
Verify the lights next to the network port are lit.
Verify the print driver is installed on the computer.
Test the network connection by pinging the network:
Windows
Click Start > Run. Type cmd, and press Enter. Type ping,
type a space, type the printer IP address, and then press Enter.
Example IP address: 192.168.0.1. To nd the printer IP, see “Find the printer
IPaddress.”
OS X
Open the Network Utility, and type the IP address in the ping pane. Press Enter.
Example IP address: 192.168.0.1. To nd the printer IP, see “Find the printer
IPaddress.”
If the window displays round-trip times, the network is working.
If the ping does not work, try restarting the printer and recheck all of the
connection steps.
Wireless network connection
(wireless models)
Verify that the network cable is not connected. The printer cannot connect
toawireless network when a network cable is connected.
Verify that the printer and wireless router are turned on and have power.
Alsomake sure the wireless switch is turned on.
Verify that the printer is within the range of the wireless network. For most
networks, the printer must be within 30 m (100 ft) of the wireless access point
(wireless router).
Verify the print driver is installed on the computer.
Verify that the computer and printer connect to the same wireless network.
For OS X verify that the wireless router supports Bonjour.
Restart the wireless router.
Troubleshooting
User guide
The user guide includes printer usage and troubleshooting information. It is available
on the printer CD and on the Web:
1. Go to www.hp.com/support/ljM253
2. Select the printer if prompted to, and then click User Guides.
Check for rmware updates
1. Go to www.hp.com/support/ljM253
2. Select the printer if prompted to, and then click Software and Drivers.
3. Select the operating system, and click the Next button.
4. Select Firmware, and click the Download button.
Control panel help (touchscreen models only)
Touch the Help button on the printer control panel to access help topics.
Additional support resources
For HP’s all-inclusive help for the printer, go to: www.hp.com/support/ljM253
Solve problems
• Find advanced conguration instructions
Download software updates
Join support forums
Find warranty and regulatory information
Access mobile printing resources
4
ไท ..........................10
한국어 ......................7
English ......................1
Tiếng Việt ...............16
繁體中文 ................13
Bahasa Indonesia .....4
Windows
1. Jangan sambungkan kabel USB sebelum menginstal perangkat lunak.
Proses penginstalan meminta untuk menyambungkan kabel pada waktu
yang tepat. Jika kabel telah tersambung, hidupkan ulang printer saat
penginstalan meminta untuk menyambungkan kabel.
2. Lanjutkan ke “5. Men-download dan menginstal perangkat lunak”.
OS X
1. Untuk OS X, sambungkan kabel USB antara komputer dan printer
sebelum menginstal perangkat lunak.
2. Lanjutkan ke “5. Men-download dan menginstal perangkat lunak”.
Sambungan jaringan nirkabel (hanya model
nirkabel)
Panel kontrol layar sentuh
1. Untuk menyambungkan printer ke jaringan nirkabel (Wi-Fi), pada panel
kontrol printer, sentuh tombol Wireless (Nirkabel).
2. Sentuh Wireless Menu (Menu Nirkabel), lalu sentuh Wireless Setup Wizard
(Wizard Pengaturan Nirkabel). Pilih nama jaringan dari daftar SSID, atau
masukkan nama jaringan jika tidak tercantum dalam daftar.
3. Gunakan keyboard untuk memasukkan frasa akses, lalu sentuh tombol OK.
4. Tunggu sementara printer menetapkan sambungan jaringan.
5. Pada panel kontrol printer, sentuh tombol Network (Jaringan). Jika
alamat IP tercantum dalam daftar, berarti koneksi jaringan telah
ditetapkan. Jika tidak, tunggu beberapa menit, lalu coba lagi. Catat
alamat IP untuk digunakan saat penginstalan perangkat lunak
berlangsung. Contoh alamat IP: 192.168.0.1
Panel kontrol 2 baris/LED
1. Untuk menyambungkan printer ke jaringan nirkabel (Wi-Fi), pastikan
printer, jalur akses, dan komputer telah dihidupkan dan komputer
tersambung ke jaringan nirkabel.
2. Kabel USB mungkin diperlukan saat penginstalan SW berlangsung.
3. Untuk mencetak dari komputer, lanjutkan dengan “5. Download dan
instal perangkat lunak.” Untuk mencetak hanya dari telepon atau
tablet, lanjutkan dengan "6. Pencetakan seluler (opsional)."
Sambungan jaringan Ethernet berkabel
(Opsional)
Gunakan kabel jaringan standar.
1. Sambungkan kabel jaringan ke printer dan jaringan. Tunggu beberapa
menit agar printer mendapatkan alamat jaringan.
2. Lanjutkan ke “5. Men-download dan menginstal perangkat lunak”.
www.hp.com/support/ljM253 www.register.hp.com
Color LaserJet Pro M253-M254
Panduan Persiapan
Sambungan USB secara langsung antara
printer dan komputer
Gunakan kabel USB jenis A-ke-B.
4.
Memilih metode sambungan
Mengkongurasi alamat IP secara manual
Lihat panduan pengguna printer untuk mendapatkan informasi tentang cara
mengkongurasi alamat IP secara manual www.hp.com/support/ljM253.
PENTING:
Ikuti
Langkah 1-2 pada
poster kongurasi perangkat
keras printer, lalu lanjutkan
dengan Langkah 3.
3.
Kongurasi awal pada panel kontrol
Setelah menghidupkan printer, tunggu proses inisialisasi. Untuk menavigasikan panel kontrol
2baris, gunakan tombol panah dan tombol OK. Untuk menavigasikan panel kontrol layar
sentuh, gunakan gerakansentuh, geser, dan gulir. Ikuti perintah pada panel kontrol untuk
mengkongurasi pengaturanberikut:
Bahasa
Lokasi
Pengaturan Default
Dalam Default Settings (Pengaturan Default) pilih salah satu dari pilihan berikut:
Dikelola sendiri: Pengaturan default yang dioptimalkan untuk sebagian besar pengguna
yang mencakup panduan langkah-langkah pengaturan dan kongurasi serta pembaruan
otomatis.
Dikelola TI: Pengaturan default yang dioptimalkan untuk kemampuan pengelolaan cepat.
Pengaturan dapat disesuaikan sepenuhnya setelah kongurasi awal.
CATATAN: Pilih Print Information Page (Cetak Halaman Informasi) untuk mencetak halaman
yang menunjukkan cara mengubah pengaturan default.
5
6.1
Menyambungkan perangkat ke jaringan nirkabel
Untuk mencetak dari telepon atau tablet, sambungkan perangkat ke jaringan
nirkabel yang sama dengan printer.
Perangkat Apple iOS (AirPrint): Buka item untuk dicetak, lalu pilih ikon Action
(Tindakan). Pilih Print (Cetak), pilih printer, lalu pilih Print (Cetak).
Perangkat Android (4.4 atau versi lebih baru): Buka item yang akan dicetak,
lalu pilih tombol Menu. Pilih Print (Cetak), pilih printer, lalu pilih Print (Cetak).
Perangkat tertentu mengharuskan Anda men-download aplikasi plugin
Layanan HP Print dari Google Play store.
Windows Phone: Download aplikasi HP AiO Remote dari Windows Store.
Selengkapnya tentang pencetakan seluler
Untuk informasi lebih lanjut tentang hal ini dan sistem
operasi lainnya (Chrome/Google Cloud Print), kunjungi
www.hp.com/go/LaserJetMobilePrinting atau pindai
kode QR.
5.
Men-download dan menginstal perangkat lunak
6.
Pencetakan seluler (opsional)
Metode 1: Download HP Easy Start (Windows dan OS X)
1. Kunjungi 123.hp.com/laserjet, lalu klik Download.
2. Ikuti petunjuk pada layar dan konrmasi untuk menyimpan le di komputer.
3. Jalankan le perangkat lunak dari folder tempat menyimpan le.
Metode 2: Download dari situs web dukungan printer
(Windows dan OS X)
1. Kunjungi www.hp.com/support/ljM253.
2. Pilih Software and drivers (Perangkat lunak dan driver).
3. Download perangkat lunak untuk model printer dan sistem operasi Anda.
4. Jalankan le perangkat lunak dari folder tempat menyimpan le.
Metode 3: Instal dari CD printer
(hanya Windows)
1. Masukkan CD printer ke komputer.
2. Ikuti petunjuk pada layar untuk menginstal perangkat lunak.
Catatan Penginstalan
Untuk informasi lebih rinci tentang perangkat lunak printer, lihat le catatan
penginstalan pada CD printer.
7.
Mengkongurasi HP ePrint melalui email (opsional)
Mengaktifkan Layanan Web HP
Panel kontrol 2 baris/LED
1. Setelah printer terhubung ke jaringan, cetak halaman kongurasi dan
temukan alamat IP printer.
2. Di komputer, buka browser web, lalu masukkan alamat IP printer di baris
alamat. HP Embedded Web Server (EWS) akan terbuka.
3. Pilih tab HP Web Services (Layanan Web HP), lalu klik tombol
Enable(Aktifkan). Printer mengkongurasi sambungan ke Internet,
lalupesan ditampilkan untuk menunjukkan bahwa lembar informasi
akandicetak.
4. Klik tombol OK. Halaman ePrint dicetak. Pada halaman ePrint, cari alamat
email yang ditentukan secara otomatis ke printer.
Gunakan HP ePrint via email untuk mencetak dokumen dengan mengirimnya sebagai lampiran email ke alamat email printer dari perangkat apa pun yang mendukung
email, bahkan dari perangkat di jaringan yang berbeda.
Untuk menggunakan HP ePrint via email, printer harus memenuhi persyaratan berikut ini:
Printer harus disambungkan ke jaringan berkabel atau nirkabel dan memiliki akses Internet.
Layanan Web HP harus diaktifkan di printer, dan printer harus terdaftar di HP Connected.
Panel kontrol layar sentuh
1. Dari layar Home (Beranda) pada panel kontrol printer, sentuh tombol Connection
Information (Informasi Sambungan) , lalu buka menu berikut:
• HP ePrint
• Settings (Pengaturan)
• Enable Web Services (Aktifkan Layanan Web)
2. Sentuh item menu OK. Printer mengaktifkan Web Services (Layanan Web),
lalu mencetak halaman informasi. Halaman informasi berisi kode printer
yang diperlukan untuk mendaftarkan printer HP di HP Connected.
3. Kunjungi www.hp.connected.com untuk membuat akun HP ePrint dan
menyelesaikan proses kongurasi.
6.2
Wi-Fi Direct (hanya model nirkabel)
Wi-Fi Direct memungkinkan perangkat yang mendukung Wi-Fi, misalnya
smartphone, tablet, atau komputer, membuat sambungan jaringan nirkabel
langsung ke printer tanpa menggunakan router atau jalur akses nirkabel.
Sambungkan ke sinyal Wi-Fi Direct printer menggunakan cara yang sama
seperti menyambungkan perangkat yang mendukung Wi-Fi ke jaringan
nirkabel atau hotspot baru.
Mengaktifkan Wi-Fi Direct
1. Panel kontrol 2-baris: Di panel kontrol printer, tekan tombol OK, lalu buka
menu Network Setup (Pengaturan Jaringan).
Panel kontrol layar sentuh: Dari layar Home (Beranda) di panel kontrol printer,
pilih tombol Connection Information (Informasi Sambungan) .
2. Buka menu berikut:
• Wi-Fi Direct
• Settings (Pengaturan) (hanya panel kontrol layar sentuh)
• On/O (Aktif/Tidak Aktif)
3. Sentuh item menu On (Aktif). Menyentuh tombol O (Tidak Aktif) akan
menonaktifkan pencetakan Wi-Fi Direct.
Untuk informasi selengkapnya tentang pencetakan dan pengaturan
nirkabel, kunjungi www.hp.com/go/wirelessprinting.
Menemukan printer
1. Dari perangkat bergerak, aktifkan Wi-Fi, lalu cari jaringan nirkabel.
2. Pilih printer yang ditunjukkan pada panel kontrol printer.
Contohnamaprinter: Direct-bb-HP M277 Laserjet
6
Sambungan jaringan berkabel (Ethernet) (opsional)
Pastikan printer telah tersambung ke port jaringan yang benar menggunakan
kabel dengan panjang yang benar.
Pastikan lampu di sebelah port jaringan telah menyala.
Pastikan driver cetak telah terinstal di komputer.
Uji sambungan jaringan dengan melakukan ping jaringan:
Windows
Klik Start (Mulai) > Run (Jalankan). Ketik cmd, lalu tekan Enter. Ketik ping, ketik
spasi, ketik alamat IP printer, lalu tekan Enter. Contoh alamat IP: 192.168.0.1.
Untuk menemukan IP printer, lihat "Menemukan alamat IP printer".
OS X
Buka Network Utility (Utilitas Jaringan), lalu ketik alamat IP di jendela ping.
Tekan Enter. Contoh alamat IP: 192.168.0.1. Untuk menemukan IP printer,
lihat "Menemukan alamat IP printer".
Jika jendela menampilkan waktu respons (round-trip time), berarti jaringan
berfungsi.
Jika ping tidak berjalan, coba hidupkan ulang printer, lalu periksa kembali
semua langkah sambungan.
Sambungan jaringan nirkabel (model nirkabel)
Pastikan kabel jaringan tidak tersambung. Printer tidak dapat tersambung
kejaringan nirkabel jika kabel jaringan tersambung.
Pastikan printer dan router nirkabel telah diaktifkan dan memiliki daya.
Pastikan juga sakelar nirkabel telah diaktifkan.
Pastikan printer telah berada dalam jangkauan jaringan nirkabel. Untuk
sebagian besar jaringan, printer harus berada dalam jarak 30 m (100 kaki) dari
jalur akses nirkabel (router nirkabel).
Pastikan driver cetak telah terinstal di komputer.
Pastikan komputer dan printer telah tersambung ke jaringan nirkabel yang sama.
Untuk OS X, pastikan router nirkabel mendukung Bonjour.
Hidupkan ulang router nirkabel.
Mengatasi masalah
Panduan pengguna
Panduan pengguna mencakup informasi tentang penggunaan printer dan
mengatasi masalah. Panduan pengguna tersedia pada CD printer dan web:
1. Kunjungi www.hp.com/support/ljM253
2. Pilih printer jika diminta, lalu klik User Guides (Panduan Pengguna).
Memeriksa pembaruan rmware
1. Kunjungi www.hp.com/support/ljM253
2. Pilih printer jika diminta, lalu klik Software and Drivers
(PerangkatLunakdanDriver).
3. Pilih sistem operasi, lalu klik tombol Next (Berikutnya).
4. Pilih Firmware, lalu klik tombol Download.
Bantuan panel kontrol (hanya model layar sentuh)
Sentuh tombol Help (Bantuan) pada panel kontrol printer untuk mengakses
topik bantuan.
Sumber dukungan tambahan
Untuk bantuan secara menyeluruh dari HP terkait printer, kunjungi:
www.hp.com/support/ljM253
• Mengatasi masalah
• Menemukan petunjuk kongurasi tingkat lanjut
• Men-download pembaruan perangkat lunak
• Bergabung dengan forum dukungan
• Mencari informasi jaminan dan peraturan
• Mengakses sumber pencetakan seluler
7
ไท ............................ 10
한국어 .........................7
English.........................1
Tiếng Việt ................. 16
繁體中文.................. 13
Bahasa Indonesia ........4
Windows
1. 소프트웨어를설치하기전에USB케이블을연결하지마십시오.설치
과정중에케이블을연결하라는메시지가표시됩니다.케이블이
이미연결된경우,설치중케이블을연결하라는메시지가표시되면
프린터를재시작합니다.
2. 5. 소프트웨어 다운로드 및 설치”로진행합니다.
OS X
1. OS X의경우,소프트웨어를설치하기전에USB케이블을컴퓨터와
프린터에연결합니다.
2. 5. 소프트웨어 다운로드 및 설치”로진행합니다.
무선 네트워크 연결(무선 모델만 해당)
터치스크린 제어판
1. 프린터를무선(Wi-Fi)네트워크에연결하려면프린터제어판에서무선
버튼을누릅니다.
2. 무선 메뉴를누른다음무선 설정 마법사를누릅니다.SSID목록에서
네트워크이름을선택하거나목록에없는경우네트워크이름을
입력합니다.
3. 키보드를사용하여암호를입력한후확인 버튼을누릅니다.
4. 프린터가네트워크연결을설정하는동안기다립니다.
5. 프린터제어판에서네트워크버튼을누릅니다.IP주소가표시되면
네트워크연결이설정된것입니다.그렇지않은경우몇분더
기다린다음다시시도합니다.소프트웨어설치중사용할IP주소를
메모합니다.IP 주소 예: 192.168.0.1
2줄/LED 제어판
1. 프린터를무선(Wi-Fi)네트워크에연결하려면프린터,액세스지점
및컴퓨터가켜져있어야하며컴퓨터가무선네트워크에연결되어
있어야합니다.
2. SW설치도중USB케이블이필요할수있습니다.
3. 컴퓨터에서인쇄하려면5. 소프트웨어 다운로드 및 설치”
로이동하십시오.휴대전화나태블릿에서만인쇄하려면
6. 모바일 인쇄(선택 사항)를진행합니다.
유선 이더넷 네트워크 연결
(선택 사항)
표준네트워크케이블을사용합니다.
1. 네트워크케이블을프린터와네트워크에연결합니다.프린터에서
네트워크주소를받을때까지몇분대기합니다.
2. 5. 소프트웨어 다운로드 및 설치”로진행합니다.
Color LaserJet Pro M253-M254
시작 설명서
프린터와 컴퓨터 간 직접 USB 연결
A-B형USB케이블을사용합니다.
4.
연결 방식 선택
IP 주소 수동으로 구성
수동으로IP주소를구성하는방법에대한자세한내용은프린터사용설명서
(www.hp.com/support/ljM253)를참조하십시오.
중요:
프린터하드웨어설치
포스터의
1~2단계를
수행한다음3단계를
진행하십시오.
3.
제어판에서 초기 설정
프린터를켠후초기화될때까지기다립니다.2줄제어판에서화살표버튼과확인
버튼을사용하여이동합니다.터치스크린제어판을탐색하려면터치,스와이프,
스크롤제스처를사용합니다.제어판에표시되는메시지에따라다음과같은설정을
구성합니다.
 언어
 위치
 기본설정
기본 설정에서다음옵션중하나를선택합니다.
자체 관리:대부분의사용자에게최적화된기본설정으로,안내설정,구성단계및
자동업데이트를포함합니다.
IT 관리:장비관리성에최적화된기본설정입니다.
설정은초기설정후모두사용자요구에맞게설정할수있습니다.
참고:기본설정을변경하는방법을지시하는페이지를인쇄하려면인쇄 정보 페이지를
선택하십시오.
www.hp.com/support/ljM253 www.register.hp.com
8
6.1
무선 네트워크에 장치 연결
핸드폰또는태블릿에서인쇄하려면해당장치를프린터와동일한무선
네트워크에연결합니다.
Apple iOS 장치(AirPrint):인쇄할항목을열고작업아이콘을선택합니다.
인쇄를선택하고프린터를선택한다음인쇄를선택합니다.
Android 장치(4.4 이상):인쇄할항목을열고메뉴버튼을선택합니다.
인쇄를선택하고프린터를선택한다음인쇄를선택합니다.
일부장치의경우Google Play스토어에서HP인쇄서비스플러그인앱을
다운로드해야합니다.
Windows Phone: Windows스토어에서HP AiO Remote앱을다운로드합니다.
모바일 인쇄에 대해 자세히 알아보기
이들운영체제및기타운영체제
(Chrome/Google Cloud Print)에대한추가정보는
www.hp.com/go/LaserJetMobilePrinting으로
이동하거나QR코드를스캔하십시오.
5.
소프트웨어 다운로드 및 설치
6.
모바일 인쇄(선택 사항)
방법 1: HP Easy Start 다운로드(WindowsOS X)
1. 123.hp.com/laserjet으로이동한다음다운로드를클릭합니다.
2. 화면에표시되는안내와알림에따라컴퓨터에파일을저장합니다.
3. 파일이저장된폴더에서소프트웨어파일을실행합니다.
방법 2: 프린터 지원 웹사이트에서 다운로드
(WindowsOS X)
1. www.hp.com/support/ljM253으로이동합니다.
2. 소프트웨어 드라이버를선택합니다.
3. 해당프린터모델및운영체제용소프트웨어를다운로드합니다.
4. 파일이저장된폴더에서소프트웨어파일을실행합니다.
방법 3: 프린터 CD에서 설치
(Windows만 해당)
1. 컴퓨터에프린터CD를넣습니다.
2. 화면의지시에따라소프트웨어를설치합니다.
설치 노트
프린터용소프트웨어에대한자세한내용은프린터CD의설치노트파일을
참조하십시오.
7.
이메일을 통한 HP ePrint 설정(선택 사항)
HP 웹 서비스 활성화
2줄/LED 제어판
1. 프린터가네트워크에연결된후에구성페이지를인쇄하고프린터IP
주소를식별합니다.
2. 컴퓨터에서웹브라우저를열고주소줄에프린터IP주소를입력합니다.
HP Embedded Web Server(EWS)가열립니다.
3. HP 웹 서비스탭을선택한다음사용버튼을클릭합니다.프린터가
인터넷에대한연결을구성하며정보시트가인쇄될것이라는메시지를
표시합니다.
4. 확인 버튼을클릭합니다.ePrint페이지가인쇄됩니다.ePrint페이지에서
프린터에자동으로할당된이메일주소를찾습니다.
이메일을통한HP ePrint를사용하면장치가동일한네트워크상에없어도이메일을사용할수있는모든장치에서프린터의이메일주소로문서를첨부파일로
전송하여인쇄할수있습니다.
이메일을통한HP ePrint를사용하려면프린터가다음요구사항을충족해야합니다.
프린터가유선또는무선네트워크에연결되어있고인터넷에접속되어야합니다.
프린터에HP웹서비스가활성화되어있어야하며,HP Connected에프린터가등록되어있어야합니다.
터치스크린 제어판
1. 프린터제어판의홈화면에서연결정보 버튼을터치하고,다음
메뉴를엽니다.
HP ePrint
설정
웹 서비스 활성화
2. 확인메뉴항목을터치합니다.프린터에서웹서비스가활성화되고정보
페이지가인쇄됩니다.정보페이지에는HP프린터를HP Connected에
등록하는데사용되는프린터코드가있습니다.
3. www.hpconnected.com으로이동하여HP ePrint계정을만들고설정
과정을완료합니다.
6.2
Wi-Fi Direct(무선 모델만 해당)
Wi-Fi Direct를통해스마트폰,태블릿,컴퓨터와같은Wi-Fi케이블장치를
무선라우터나액세스지점을사용하지않고직접프린터에무선네트워크
연결을할수있습니다.Wi-Fi를사용할수있는장치를새무선네트워크
또는핫스폿에연결하는방식과동일한방법으로프린터의Wi-Fi Direct
신호에연결합니다.
Wi-Fi Direct 활성화
1. 2줄 제어판:프린터제어판에서확인버튼을누른다음네트워크 설정
메뉴를엽니다.
터치스크린 제어판:프린터제어판의홈화면에서연결 정보
버튼을선택합니다.
2.다음메뉴를엽니다.
• Wi-Fi Direct
설정(터치스크린 제어판만 해당)
켜기/끄기
3. 켜기 메뉴항목을터치합니다.Wi-Fi Direct인쇄를비활성화하려면끄기
버튼을터치합니다.
무선인쇄및무선설정에대한자세한내용은
www.hp.com/go/wirelessprinting에서확인하십시오.
프린터 찾기
1. 모바일장치에서Wi-Fi를켜고무선네트워크를검색합니다.
2. 프린터제어판에표시되는프린터를선택합니다.
프린터 이름 예: Direct-bb-HP M277 Laserjet
9
유선 (이더넷) 네트워크 연결 (선택 사항)
프린터가올바른길이의케이블을사용하여올바른네트워크포트에
연결되어있는지확인합니다.
네트워크포트옆에있는표시등이켜져있는지확인합니다.
프린터드라이버가컴퓨터에설치되어있는지확인합니다.
네트워크에ping을수행하여네트워크통신을테스트합니다.
Windows
시작 > 실행을클릭합니다.cmd를입력하고Enter를누릅니다.
ping,공백,프린터IP주소를차례로입력한다음Enter를누릅니다.
IP 주소 예: 192.168.0.1.프린터IP를찾으려면“프린터IP주소찾기”를
참조하십시오.
OS X
네트워크유틸리티를열고ping창에IP주소를입력합니다.Enter를
누릅니다.IP 주소 예: 192.168.0.1.프린터IP를찾으려면“프린터IP주소
찾기”를참조하십시오.
창에왕복시간이표시되면네트워크가작동중입니다.
ping이작동하지않는경우,프린터를재시작하고모든연결단계를다시
확인합니다.
무선 네트워크 연결(무선 모델)
네트워크케이블이연결되어있지않은지확인합니다.네트워크케이블이
연결되어있는경우프린터가무선네트워크에연결할수없습니다.
프린터및무선라우터가켜져있고전원에이상이없는지확인합니다.무선
스위치가켜져있는지도확인합니다.
프린터가무선네트워크범위내에있는지확인합니다.대부분의
네트워크에서는프린터가무선액세스지점(무선라우터)의30m(100ft)
이내에있어야합니다.
프린터드라이버가컴퓨터에설치되어있는지확인합니다.
컴퓨터및프린터가동일한무선네트워크에연결되어있는지확인합니다.
OS X의경우무선라우터에서Bonjour를지원하는지확인합니다.
무선라우터를재시작합니다.
문제 해결
사용 설명서
사용설명서에프린터사용법및문제해결정보가포함되어있습니다.프린터
CD및웹에서제공됩니다.
1. www.hp.com/support/ljM253으로이동합니다.
2. 메시지가표시되면프린터를선택하고사용 설명서를클릭합니다.
펌웨어 업데이트 확인
1. www.hp.com/support/ljM253으로이동합니다.
2. 메시지가표시되면프린터를선택하고 소프트웨어 및 드라이버를
클릭합니다.
3. 운영체제를선택하고다음버튼을클릭합니다.
4. 펌웨어를선택하고다운로드버튼을클릭합니다.
제어판 도움말(터치스크린 모델만 해당)
도움말을보려면프린트제어판의도움말 버튼을누르십시오.
추가 지원 리소스
해당프린터에대한HP전체도움말은다음으로이동하십시오.
www.hp.com/support/ljM253
문제해결
고급구성지침찾기
소프트웨어업데이트다운로드
지원포럼가입
보증및규정정보찾기
모바일인쇄리소스액세스
10
ไท ..........................10
한국어 ......................7
English ......................1
Tiếng Việt ...............16
繁體中文 ................13
Bahasa Indonesia .....4
www.hp.com/support/ljM253 www.register.hp.com
11
6.1 6.2
12
13
ไท ............................ 10
한국어 .........................7
English.........................1
Tiếng Việt ................. 16
繁體中文.................. 13
Bahasa Indonesia ........4
Windows
1. 請勿在安裝軟體之前連接USB纜線。安裝程序會在適當時間提示您
接上纜線。如果纜線已經連接,請在安裝提示告訴您將纜線接上時
重新啟動印表機。
2. 繼續執行5. 下載與安裝軟體」
OS X
1. 對於OS X,先連接電腦與印表機之間的USB纜線,再進行軟體安
裝。
2. 繼續執行5. 下載與安裝軟體」
無線網路連線(僅限無線機型)
觸控螢幕控制面板
1. 若要將印表機連接至無線(Wi-Fi)網路,請點選印表機控制面板上的
「無線」按鈕。
2. 點選無線功能表,然後點選無線設定精靈。從SSID清單選擇網路
名稱,或輸入網路名稱(如果未列出)。
3. 使用鍵盤輸入複雜密碼,然後點選確定按鈕。
4. 等待印表機建立網路連線。
5. 在印表機控制面板上,點選「網路」按鈕。若列出IP位址,則
已建立網路連線。若未列出,請等候幾分鐘後再試一次。請記下
IP位址以便在安裝軟體時使用。IP 位址範例192.168.0.1
雙行/LED 控制面板
1. 若要將印表機連接至無線(Wi-Fi)網路,請確定印表機、存取點和電
腦都已開啟,而且電腦已連接至無線網路。
2. 安裝軟體期間,可能需要使用USB纜線。
3. 若要從電腦列印,請繼續執行5. 下載與安裝軟體」。若要單純從
電話或平板電腦列印,請繼續執行6. 行動列印(選用)」
有線乙太網路網路連線
(選用)
使用標準網路線。
1. 將網路線連接至印表機與網路。等待幾分鐘,讓印表機取得網路位
址。
2. 繼續執行5. 下載與安裝軟體」
Color LaserJet Pro M253-M254
入門指南
直接在印表機與電腦之間連接的 USB 連線
使用A對B型USB纜線。
4.
選擇連線方法
手動設定 IP 位址
如需有關如何手動設定IP位址的詳細資訊,請參閱印表機使用指南
www.hp.com/support/ljM253
重要事項:
依照印表機硬體設定海報
步驟 1 - 2進行後,
再繼續執行步驟 3
3.
控制面板上的初始設定
開啟印表機電源後,等待印表機初始化。若要瀏覽雙行控制面板,
請使用箭號按鈕和OK按鈕。若要瀏覽觸控螢幕控制面板,請使用點選、
撥動和捲動手勢。依照控制面板上的提示設定下列設定:
語言
位置
預設值
預設值下,選擇其中一個選項:
Self-managed(自我管理):大多數使用者都適用的最佳化預設值,
包括提供指引的安裝與設定步驟以及自動更新。
IT-managedIT管理):適合機群管理功能的最佳化預設值。
初始設定之後,可完全自訂這些設定。
附註:選擇列印資訊頁以列印指示如何變更預設值的頁面。
www.hp.com/support/ljM253 www.register.hp.com
14
6.1
將裝置連接至無線網路
若要從手機或平板電腦列印,請將裝置連接到與印表機相同的無線網
路。
Apple iOS 裝置 (AirPrint)開啟要列印的項目,然後選擇動作圖示。選擇
Print(列印),選擇印表機,然後選擇Print(列印)。
Android 裝置(4.4 或更新版本):開啟要列印的項目,並選擇選單
鈕。選擇Print(列印),選擇印表機,然後選擇Print(列印)。
某些裝置需要從Google Play商店下載HP Print Service外掛應用程式。
Windows Phone從Windows市集下載HP AiO Remote應用程式。
進一步了解行動列印
如需有關這些和其他作業系統
Chrome/Google雲端列印)的更多資訊,
請前往www.hp.com/go/LaserJetMobilePrinting
或掃描QR碼。
5.
下載與安裝軟體
6.
行動列印(選用)
方法 1:下載 HP Easy StartWindowsOS X
1. 前往123.hp.com/laserjet,然後按一下Download(下載)。
2. 依照螢幕上的指示和提示,將檔案儲存至電腦。
3. 從儲存軟體檔案的資料夾啟動軟體檔案。
方法 2:從印表機支援網站下載(WindowsOS X
1. 前往www.hp.com/support/ljM253
2. 選擇Software and drivers(軟體與驅動程式)。
3. 下載適用於您印表機型號和作業系統的軟體。
4. 從儲存軟體檔案的資料夾啟動軟體檔案。
方法 3:從印表機光碟安裝(僅限 Windows
1. 將印表機光碟插入電腦中。
2. 依照螢幕上的指示安裝軟體。
安裝注意事項
如需印表機所需軟體的詳細資訊,請參閱印表機光碟上的「安裝注意事項」
檔案。
7.
設定 HP ePrint via email(選用)
啟用 HP Web 服務
雙行/LED 控制面板
1. 將印表機連線到網路後,請列印組態頁並找出印表機的IP位址。
2. 開啟電腦上的網頁瀏覽器,並在網址列中輸入印表機IP位址。
HP內嵌式Web伺服器(EWS)即會開啟。
3. 選擇HP Web 服務標籤,然後按一下啟用按鈕。印表機會設定網際網
路連線,然後出現訊息表示即將列印資訊頁。
4. 按一下確定按鈕。隨即列印ePrint頁面。在ePrint頁面上,尋找自動
指派給印表機的電子郵件地址。
使用HP ePrint via email,您只要在任何具備電子郵件功能的裝置上,將文件當做電子郵件附件傳送至印表機的電子郵件地址即可列印該文件,即使您使
用的裝置不在同一個網路上也沒問題。
若要使用HP ePrint via email,印表機必須符合以下要求:
印表機必須連線到有線或無線網路,且必須能夠存取網際網路。
印表機必須啟用HP Web服務,而且您必須已向HP Connected註冊印表機。
觸控螢幕控制面板
1. 在印表機控制面板的主畫面中,點選「Connection Information
(連線資訊) 按鈕,並開啟下列功能表:
HP ePrint
• 設定
• 啟用 Web 服務
2. 點選確定功能表項目。印表機隨即啟用Web服務,然後列印資訊頁。
資訊頁包含向HP Connected註冊HP印表機所需的印表機代碼。
3. 前往www.hp.connected.com,建立HP ePrint帳戶並完成設定程序。
6.2
Wi-Fi Direct(僅限無線機型)
Wi-Fi Direct可讓具備Wi-Fi功能的裝置(例如智慧型手機、平板電腦或
電腦)在沒有使用無線路由器或存取點的情況下,直接與印表機進行無
線網路連線。連接至印表機的Wi-Fi Direct訊號,方法與您將具備Wi-Fi
功能的裝置連接至新的無線網路或熱點一樣。
啟用 Wi-Fi Direct
1. 雙行控制面板:在印表機控制面板上,按下OK按鈕,接著開啟網路
設定功能表。
觸控螢幕控制面板:在印表機控制面板的主畫面中,選擇連線資訊
按鈕。
2.開啟下列功能表:
Wi-Fi Direct
• 設定(僅限觸控螢幕控制面板)
• 開/關
3.點選開啟功能表項目。點選關閉按鈕會停用Wi-Fi Direct列印。
如需無線列印及無線設定的詳細資訊,請前往
www.hp.com/go/wirelessprinting
探索印表機
1. 在行動裝置上,開啟Wi-Fi,然後搜尋無線網路。
2. 選擇如印表機控制面板上所顯示的印表機名稱。
印表機名稱範例:Direct-bb-HP M277 Laserjet
15
有線(乙太網路)網路連線(選用)
確認印表機以長度合適的纜線連接到正確的網路連接埠。
確認網路連接埠旁邊的指示燈已亮起。
確認電腦已安裝列印驅動程式。
使用Ping指令偵測網路以測試網路通訊:
Windows
按一下開始 > 執行。輸入cmd,並按下Enter。依序輸入ping、空格、印
表機IP位址,然後按下EnterIP 位址範例192.168.0.1。若要尋找印
表機IP,請參閱「尋找印表機IP位址」。
OS X
開啟「網路工具程式」,並在ping窗格中輸入IP位址。按下
EnterIP 位址範例:192.168.0.1。若要尋找印表機IP,請參閱「尋找印
表機IP位址」。
如果視窗顯示往返時間,表示網路運作正常。
如果Ping沒有作用,請嘗試重新啟動印表機,再重新檢查所有的連線步
驟。
無線網路連線(無線機型)
確認未連接網路線。當網路線已連接時,印表機無法連接至無線網路。
確認印表機和無線路由器已開啟且接通電源。此外,確定無線開關已開
啟。
確認印表機位於無線網路範圍內。對多數網路而言,印表機必須是在距
離無線存取點(無線路由器)30公尺(100英呎)以內的位置。
確認電腦已安裝列印驅動程式。
確認電腦和印表機連接至相同的無線網路。
若為OS X,請確認無線路由器支援Bonjour
重新啟動無線路由器。
疑難排解
使用指南
使用指南包含印表機使用方式及疑難排解資訊。這可在印表機光碟或網路
上取得:
1. 前往www.hp.com/support/ljM253
2. 選擇印表機(如果有出現提示),然後按一下
User Guides(使用指南)。
檢查韌體更新
1. 前往www.hp.com/support/ljM253
2. 選擇印表機(如果有出現提示),然後按一下 Software and Drivers
(軟體與驅動程式)。
3. 選擇作業系統,然後按一下Next(下一步)按鈕。
4. 選擇Firmware(韌體),然後按一下Download(下載)按鈕。
控制面板說明(僅限觸控螢幕機型)
點選印表機控制面板上的「說明」 按鈕以存取說明主題。
其他支援資源
如需印表機的HP全方位說明,請前往:www.hp.com/support/ljM253
•解決問題
•尋找進階組態設定指示
•下載軟體更新
•加入支援論壇
•尋找保固及法規資訊
•存取行動列印資源
16
ไท ..........................10
한국어 ......................7
English ......................1
Tiếng Việt ...............16
繁體中文 ................13
Bahasa Indonesia .....4
www.hp.com/support/ljM253 www.register.hp.com
17
6.1
6.2
18
19
www.hp.com
© Copyright 2017 HP Development Company, L.P.
Reproduction, adaptation or translation without prior written permission is
prohibited, except as allowed under the copyright laws.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein
should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Trademark Credits
Windows® is a U.S. registered trademark of Microsoft Corporation.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and
other countries.
OS X is a trademark of Apple Inc., registered in the U.S. and other countries.
AirPrint is a trademark of Apple Inc., registered in the U.S. and other countries.
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio-frequency
energy. If this equipment is not installed and used in accordance with the
instructions, it may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase separation between equipment and receiver.
Connect equipment to an outlet on a circuit dierent from that to which the
receiver is located.
Consult your dealer or an experienced radio/TV technician.
Any changes or modications to the product that are not expressly approved by
HPcould void the user’s authority to operate this equipment. Use of a shielded
interface cable is required to comply with the Class B limits of Part 15 of FCC rules.
For more regulatory information, see the electronic user guide. HP shall not be
liable for any direct, indirect, incidental, consequential, or other damage alleged in
connection with the furnishing or use of this information.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

HP Color LaserJet Pro M253-M254 Printer series インストールガイド

タイプ
インストールガイド

HP Color LaserJet Pro M253-M254 Printer series は、家庭や小規模オフィスに最適なカラーレーザープリンターです。毎分最大21ページの高速印刷と、最大1200dpiの高解像度印刷が可能です。また、無線LANと有線LANに対応しており、モバイル端末からも簡単に印刷できます。さらに、自動両面印刷や、用紙カセットの増設など、ビジネスを効率化する機能も搭載しています。

その他のドキュメント