Yealink Yealink UVC30-CP900-BYOD Meeting Kit (EN, CN) V1.0 クイックスタートガイド

  • こんにちは!Yealink UVC30-CP900-BYOD会議キットのクイックスタートガイドの内容を理解しています。このデバイスのセットアップ、使用方法、トラブルシューティングなど、ご質問にお答えします。お気軽にご質問ください!
  • CP900の電源のオン/オフ方法は?
    CP900で通話をミュートするには?
    Teamsボタンはどのような機能を持っていますか?
    デバイスの推奨設置場所は?
Yealink UVC30-CP900-BYOD
Meeting Kit
Quick Start Guide
(V1.0)
www.yealink.com
English | 简体中文
快速入门指南
Package Contents
CP900
CP900
Quick Start Guide
Carrying Case
UVC30 Room Camera Lens
Privacy Cover
UVC30 Room
Quick Start Guide
We recommend that you use the accessories provided or approved by Yealink.
The use of unapproved third-party accessories may result in poor performance.
3m
CP900 Package (USB Speakerphone)
UVC30 Room Package (Camera)
BYOD
PD
Power Adapter
BYOD
Quick Start Guide
BYOD Package
1.2m
USB T
ype-C Cable
5m USB
Extension Cable
Velcro×2
Type-C to Type-A
Adapter
1
Connecting Your Devices with BYOD
HDMI Cable
UVC30 Room
PD
Power Adapter
CP900
USB Type-C Cable
We recommend that you use a stable 1.8m HDMI cable with magnetic ring to
connect the TV.
BYOD
Placing Your Devices
Yealink UVC30-CP900-BYOD Meeting kit is suitable for focus and small rooms
with 2-7 participants.
Place the CP900 on the center of the table, up to 2m/6.5ft from each
participant.
Attach the BYOD box to the bottom or the top of the table.
TV
TV
PC
HDMI Cable
USB 2.0
Type-C
Type-C
Power
USB
2
The CP900 is compatible with Microsoft Teams/Skype for Business client,
Zoom client and so on. After connected, you can control the calls on the
CP900.
Teams Button Functions
Using Your CP900
Power On/Off
Mute Button
Volume Up
Volume Down
Answer Call
End Call
Teams Button
Bluetooth Button
Hold for 2 seconds.
Power on or off
End or reject a call
Mute/unmute microphone
Volume up/down
Answer a call
Tap .
Tap .
Tap / .
During a call, tap . The mute LED
Indicator and LED light-ring glow red.
Reset to the factory
Hold and for 6 seconds.
Hold a call
During a call, tap . The LED light-ring
flashes green.
Task
Invoke the Teams client
Do
Activate Cortana/Activate your
smartphone’s voice assistant
Hold for 2 seconds.
After the Teams client connects ,
tap .
Task
Do
The Teams button is only applicable when connected to Microsoft Teams
client.
(not applicable)
Microphone
3
包装清单
CP900
快速入门指南
拉链包
UVC30 Room摄像机 镜头隐私盖
UVC30 Room
快速入门指南
我们推荐使用由Yealink提供或经Yealink认可的配件和线缆使用未经认可的第三方
配件和线缆可能会导致性能的下降。
3m
CP900套件(USB 扬声器)
UVC30 Room套件(摄像机)
BYOD盒子
PD
电源适配器
BYOD
快速入门指南
BYOD盒子套件
1.2
USB T
ype-C线
5米USB
延长线
魔术贴×2
Type-C转
Type-A 转换头
4
连接BYOD盒子
HDMI线
PD
电源适配器
USB Type-C 线
我们建议您使用稳定的1.8带磁环的HDMI线与来连接电视。
BYOD盒子
放置设备
Yealink UVC30-CP900-BYOD组合适用于2-7人的小型会议室。
将CP900放在桌子中间与每名与会者的距离不超过 2 米/6.5 英尺。
将BYOD盒子贴在桌子顶部或底部。
UVC30 Room
CP900
显示设备
TV
PC
HDMI Cable
USB 2.0
Type-C
Type-C
USB
电源
5
使用CP900
CP900可以搭配Microsoft Teams/Skype for Business客户端和Zoom客户端等
使用。 CP900连接至PC后你可以在CP900上控制通话。
音量调低
接听电话
蓝牙键
(暂不适用
电源开启/关闭
静音键
音量调高
挂断电话
Teams键/语音助手
Teams键功能
任务 操作
调出Teams客户端
Teams客户端连接成功后 按Teams键 。
激活Cortana/
唤醒智能手机的语言助手
长按Teams键 2秒。
长按电源键 3秒。
开机/关机
挂断电话/拒接来电
麦克风静音/取消静音
音量调高/调低
接听来电
任务 操作
按接听键 。
按挂断键 。
按音量调高键 / 调低键 。
环形灯带的蓝色LED数增多/减少。
通话中按静音键 。
静音键红灯常亮环形灯带呈红色。
恢复出厂
按住接听键 和挂断键 6秒钟。
通话保持
通话中按接听键 。 环形灯带绿色闪烁。
播放音乐/暂停播放
当连接上的智能手机播放音乐时按挂断键
暂停播放;再次按挂断键 继续播放。
Teams按键功能仅适用于Microsoft Teams客户端。
麦克风
6
Teams键/语音助手
Regulatory Notices
Copyright
©2020
YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD
.All rights reserved.
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service,
we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to
worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding
technical patents of cloud computing , audio, video and image processing technology, Yealink has built up a panoramic collaboration
solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market
share of SIP phones shipments.
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et
actionné avec une distance minimum de 20 centimètres entre le radiateur et
votre corps.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
430104001290
2
/