UVC30 Content Camera
Quick Start Guide
(V1.0)
www.yealink.com
English | 简体中文
Package Contents
Quick Start Guide
1
UVC30 Room
3m
3M VelcroCable lock box
L-shaped
Black Tape×4
Mounting Bracket and Accessories Screwdriver
5m EXT
USB Cable
Cable Lock Box
Content Camera Installation
Adjust the bracket to the longest.
1
2
2
1. Assemble the bracket
1/4”-20 UNC screw
2. Assemble the metal telescopic rod
The length of the metal telescopic rod depends on the width of the whiteboard when you mount
the content camera on a wall:
The width of the whiteboard
183cm（6ft）
213cm（7ft）
244cm（8ft）
274cm（9ft）
64cm（2.10ft）
75cm（2.45ft）
86cm（2.80ft）
96cm（3.15ft）
Select the scale of the metal telescopic rod
When the whole wall is a whiteboard, you can use the L-shaped tapes to mark the four corners of the whiteboard,
so that the camera adapts according to the limited range.
2
3. Assemble the content camera
6
(Recommended) Mount on a wall
3
4
5
90°
41mm
Whiteboard
2
4
Adjust the camera angle.
3
Hole depth: 30mm
Hole diameter: 6mm
Whiteboard
Whiteboard
Whiteboard
The camera can be routed down or towards the ceiling.
3
Suspend on the ceiling
The height of the camera installation must meet local building rules. If the USB cable that comes
with the camera is not long enough, please choose the desired extension cable solution.
You can use the camera preview in the Microsoft Teams Rooms app to determine the final placement
of the camera. For more information on how to use the content camera with Microsoft Teams Room,
please refer to https://docs.microsoft.com/en-us/MicrosoftTeams/rooms/content-camera.
Adjust the camera angle.
LED Indicator Instructions
LED indicators on the UVC30 Room:
LED Status Description
Off
The UVC30 Room is not properly connected to the mini-PC or the
UVC30 Room is inactive.
Solid green
Flashing orange The UVC30 Room is upgrading firmware.
The UVC30 Room is in recovery mode and the firmware has not
been upgraded.
The UVC30 Room is active.
Flashing red
Using Your Conent Camera
For more information on how to use your content camera, please refer to Yealink RoomConnect User
Guide.
包装清单
安装白板摄像机
4
UVC30 Room
3m
L型黑色胶带×4
USB锁线盒 快速入门指南
支架和配件 螺丝刀
5m
USB 延长线
调整到支架最长的位置。
1. 安装支架
2. 安装金属伸缩杆
USB锁线盒 3M 魔术贴
1/4”-20 UNC screw
挂墙安装时，请根据白板的宽度选择金属伸缩杆的长度：
白板宽度 选择金属伸缩杆的刻度
183cm（6ft）
213cm（7ft）
244cm（8ft）
274cm（9ft）
64cm（2.10ft）
75cm（2.45ft）
86cm（2.80ft）
96cm（3.15ft）
当整面墙是白板时，你可以使用L型胶带标定白板四个角，摄像机根据限定的范围进行自适应。
3. 固定白板Camera
6
（推荐）墙装
3
4
5
打孔直径： 6mm
打孔深度： 30mm
90°
2
4
3
41mm
白板
白板
白板
调整摄像机角度。
白板
5
摄像机可以朝下或者朝天花板走线。
吊装
调整摄像机角度。
摄像机安装的高度需满足当地建筑规范。 若摄像机自带的USB线不够长，请自行选择延长线方案。
在使用摄像机时可以先通过Teams Rooms app预览调整摄像机位置。更多关于白板摄像机如何搭配
微软Teams Room使用，请参阅
https://docs.microsoft.com/zh-cn/MicrosoftTeams/rooms/content-camera。
6
UVC30 Room指示灯介绍如下：
关闭
绿灯常亮
橙灯闪烁
红灯闪烁
UVC30 Room 没有正确连接到mini-PC上或未处于正常工作状态。
UVC30 Room 处于正常工作状态。
UVC30 Room 固件更新中。
UVC30 Room 进入恢复模式，还未固件更新。
指示灯介绍
指示灯状态 说明
使用白板摄像机
更多关于如何使用白板摄像机，请参阅Yealink RoomConnect用户指南。
Regulatory Notices
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright
©2020YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD
.All rights reserved.
About Yealink
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware, guides, FAQ, Product documents, and more. For better service,
we sincerely recommend you to use Yealink Ticketing system (https://ticket.yealink.com) to submit all your technical issues.
Yealink is a global leading provider of enterprise communication and collaboration solutions, offering video conferencing service to
worldwide enterprises. Focusing on research and development, Yealink also insists on innovation and creation. With the outstanding
technical patents of cloud computing , audio, video and image processing technology, Yealink has built up a panoramic collaboration
solution of audio and video conferencing by merging its cloud services with a series of endpoints products. As one of the best
providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market
share of SIP phones shipments.
Operating Ambient Temperatures
Operating temperature: +32 to 104°F (0 to 40°C)
Relative humidity: 5% to 90%, noncondensing
Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally
in accordance with the operating instructions and the system environment.
We are not liable for damage or loss resulting from the use of this product,
or for any claim from a third party. We are not liable for problems with
Yealink device arising from the use of this product; we are not liable for
financial damages, lost profits, claims from third parties, etc., arising from
the use of this product.
Explanation of the symbols
DC symbol
is the DC voltage symbol.
WEEE Warning symbol
To avoid the potential effects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out wheeled bin
symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting [email protected].
Safety Instructions
Save these instructions. Read these safety instructions before use!
General Requirements
Before you install and use the device, read the safety instructions
carefully and observe the situation during operation.
During the process of storage, transportation, and operation, please
always keep the device dry and clean, avoid collision and crash.
Please attempt not to dismantle the device by yourself. In case of any
discrepancy, please contact the appointed maintenance center for repair.
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
Place the device at a well-ventilated place. Do not expose the device
under direct sunlight.
Keep the device dry and free of dusts.
Do not place the device on or near any inflammable or fire-vulnerable
object, such as rubber-made materials.
Keep the device away from any heat source or bare fire, such as a candle
or an electric heater.
Operating Requirements
Do not let a child operate the device without guidance.
Do not let a child play with the device or any accessory in case of
accidental swallowing.
Please use the accessories provided or authorized by the manufacturer
only.
The power supply of the device shall meet the requirements of the input
voltage of the device. Please use the provided surge protection power
socket only.
Before plugging or unplugging any cable, make sure that your hands are
completely dry.
Do not spill liquid of any kind on the product or use the equipment near
water, for example, near a bathtub, washbowl, kitchen sink, wet
basement or near a swimming pool.
During a thunderstorm, stop using the device and disconnect it from the
power supply. Unplug the power plug and the Asymmetric Digital
Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid
lightning strike.
If the device is left unused for a rather long time, disconnect it from the
power supply and unplug the power plug.
When there is smoke emitted from the device, or some abnormal noise
or smell, disconnect the device from the power supply, and unplug the
power plug immediately.
Contact the specified maintenance center for repair.
Do not insert any object into equipment slots that is not part of the
product or auxiliary product.
Before connecting a cable, connect the grounding cable of the device
first. Do not disconnect the grounding cable until you disconnect all other
cables.
Cleaning Requirements
Before cleaning the device, disconnect it from the power supply.
Use a piece of soft, dry and anti-static cloth to clean the device.
Keep the power plug clean and dry.
Troubleshooting
The unit cannot supply power to device other than Yealink device.
There is a bad connection with the plug.
1. Clean the plug with a dry cloth.
2. Connect it to another wall outlet.
The usage environment is out of operating temperature range.
1. Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
1. Connect the cable correctly.
You cannot connect the cable properly.
1. You may have connected a wrong Yealink device.
2. Use the correct power supply.
Some dust, etc., may be in the port.
1. Clean the port.
Contact your dealer or authorized service facility for any further questions.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
(1) this device may not cause interference; and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device. CAN ICES-3(B)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.NMB-3(B)
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
430104001329
/