DiamondClean
Essential
7000 Series/ӻΐ
5
6
1
2
3
4
7
empty page before TOC
English
6English
Introduction
Congratulations on your purchase and welcome to
Philips! To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
Important safety information
Only use the product for its intended purpose. Read this
important information carefully before you use the
product and its batteries and accessories, and save it for
future reference. Misuse can lead to hazards or serious
injuries.
- Charge only with Philips WAA1001, WAA2001, UL or
equivalent safety approved IPX4 adapters with input
ratings (100‑240V~; 50/60Hz; 3.5W) and output
ratings (5Vdc; 2.5W). For the list of adapters, please
see philips.com/support.
- Charging base must only be supplied at safety extra-
low voltage corresponding to the marking on the
appliance.
- Keep the charger away from water.
- Make sure the handle is completely dry before you
connect the USB charger.
- This appliance can be used by children and persons
with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have
been given supervision or instruction concerning use
of the appliance in a safe way and understand the
hazards involved. Cleaning and user maintenance
shall not be made by children without supervision.
- Children shall not play with the appliance.
- Only use original Philips accessories or consumables.
Only use the USB charger provided with the product.
- This appliance contains no user-serviceable parts. If
the appliance is damaged, stop using it and contact
the Consumer Care Center in your country (see
'Warranty and support'). If the cord is damaged,
replace the charger.
- Do not use the charger outdoors or near heated
surfaces.
7
English
- Do not clean any part of the product in the
dishwasher.
- This appliance has only been designed for cleaning
teeth, gums and tongue.
- Stop using the appliance and consult your
dentist/doctor if excessive bleeding occurs after use, if
bleeding continues to occur after 1 week of use or if
you experience discomfort or pain.
- If you have had oral or gum surgery in the previous 2
months, consult your dentist before you use this
appliance.
- If you have a pacemaker or other implanted device,
contact your doctor or the manufacturer of the
implanted device prior to use.
- If you have medical concerns, consult your doctor
before you use this appliance.
- This appliance is a personal care device and is not
intended for use on multiple patients in a dental
practice or institution.
Warnings
- Stop using a brush head with crushed or bent bristles.
Replace the brush head every 3 months or sooner if
signs of wear appear.
- If your toothpaste contains peroxide, baking soda or
bicarbonate (common in whitening toothpastes),
thoroughly clean the brush head with soap and water
after each use. This prevents possible cracking of the
plastic.
- Avoid direct contact with products that contain
essential oils or coconut oil. Contact may result in
bristles dislodging.
- Charge, use and store the product at a temperature
between 0°C and 40°C.
- Do not expose the appliance or battery to excessive
temperatures.
- If the product becomes abnormally hot or smelly,
changes color or if charging takes longer than usual,
stop using and charging the product and contact
Philips.
- Do not place products and their batteries in
microwave ovens or on induction cookers.
8English
- Do not open, modify, pierce, damage or dismantle the
product or battery to prevent batteries from heating
up or releasing toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge batteries.
- If batteries are damaged or leaking, avoid contact
with the skin or eyes. If this occurs, immediately rinse
well with water and seek medical care.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
Intended use
Sonicare power toothbrushes are intended to remove
adherent plaque and food debris from the teeth to
reduce tooth decay and improve and maintain oral
health. Sonicare power toothbrushes are intended for
consumer home use. Use by children should be with
adult supervision.
Your Philips Sonicare toothbrush
1 Handle
2 Smart display
3 Power on/off and mode button
4 Pressure sensor indicator
5 Brush head cap(s)
6 Smart brush head(s)
7 USB charger
Note: Wall adapter not included. Only use 5V IPX4
adapter (Type A).
9
English
Getting started
Attaching the brush head
1Align the brush head so the bristles point in the same
direction as the front of the handle.
C
2
2Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the brush
head and the handle. This allows the brush head to
vibrate properly.
Using your Philips Sonicare toothbrush
If you are using your Sonicare toothbrush for the first
time, it is normal to feel more vibration than when using
a non-electric toothbrush. It is common for first time
users to apply too much pressure. Only apply gentle
pressure and let the toothbrush do the brushing for you.
Please follow brushing instructions below for the best
experience. To help you transition to your new Sonicare
power toothbrush, it comes with the EasyStart feature
turned on. This feature gently increases the power over
the first 14 brushings to help you adapt to brushing with
a Philips Sonicare toothbrush.
Brushing instructions
1Wet the bristles and apply a small amount of
toothpaste.
2Press the power on/off button to turn on the Philips
Sonicare. Then select the brushing mode.
3Place the toothbrush bristles against the teeth at a
slight angle (45 degrees), pressing gently to make the
bristles reach the gumline or slightly beneath the
gumline.
10 English
Note: Keep the center of the brush in contact with the
teeth at all times.
4Gently keep the bristles placed on the teeth and in the
gumline. Brush your teeth with small back and forth
motion so the bristles reach between the teeth.
Continue this motion throughout your brushing cycle.
Note: The bristles should slightly flare. It is not
recommended to scrub as you would with a manual
toothbrush.
5To clean the inside surfaces of the front teeth, tilt the
brush handle semi-upright and make several vertical
overlapping brushing strokes on each tooth.
Note: To make sure you brush evenly throughout the
mouth, divide your mouth into 4 sections using the
QuadPacer feature (see chapter ‘Features’).
2
4
3
1
6Begin brushing in section 1 (outside upper teeth) and
brush for 30 seconds before you move to section 2
(inside upper teeth). Continue brushing in section 3
(outside lower teeth) and brush for 30 seconds before
you move to section 4 (inside lower teeth).
7After you have completed the brushing cycle, you can
spend additional time brushing the chewing surfaces
of your teeth and areas where staining occurs. You
can also brush your tongue, with the toothbrush
turned on or off, as you prefer.
Your Philips Sonicare toothbrush should be safe to
use on braced (brush heads wear out sooner when
used on braces) and dental restorations (fillings,
crowns, veneers) if they are properly adhered and not
compromised. If a problem occurs, please follow up
with a dental professional.
Note: When the Philips Sonicare toothbrush is used in
clinical studies, it must be used in Clean mode with the
handle fully charged and the EasyStart feature
deactivated.
11
English
Charging and battery status
Charging your Philips Sonicare
1Attach the USB charger to a wall adapter and plug the
wall adapter into an electrical outlet.
2Place the handle on the charger.
- The battery icon with lightning symbol is shown
on the display and you hear two beeps. The light
ring lights up white for 5 seconds.
Note: It can take up to 16 hours to fully charge the
battery, but you can use the Philips Sonicare toothbrush
before it is fully charged.
Note: This Philips Sonicare toothbrush is designed to
provide at least 28 brushing sessions, each session lasting
2 minutes (14 days if used twice per day).
Battery status
The battery level is shown on the display:
20%
- When the battery level is below 20%, the battery icon
flashes in red color and you hear two short beeps.
- At the end of every brushing session.
- When you remove the toothbrush from the charger.
- When you press the power on/off button while the
toothbrush is charging.
12 English
Features
- Brushing modes
- EasyStart
- Brush head replacement reminder
- Pressure sensor
- QuadPacer
- SmarTimer
- Smart display
- Brushing report
Brushing modes
Based on the smart brush head you use; the optimal
mode will be selected automatically by the BrushSync
technology. To change modes, press the mode button
while the handle is turned on. Your power toothbrush is
equipped with five different modes:
Clean
Clean
For exceptional everyday cleaning (2 minutes)
Deep
Clean
Deep Clean
For invigorating and thorough cleaning (3 minutes).
Gum Pro
Gum Pro
For exceptional cleaning and gentle gum massaging (3
minutes).
13
English
Sensitive
Sensitive
For gentle cleaning of gums (2 minutes).
White
White
For removing stains from teeth (2 minutes 30 seconds).
After brushing your whole mouth (2 minutes), spend the
remaining time brushing the front teeth.
Note: When you use the toothbrush with the smart brush
head for the first time, the default mode is 'Gum Pro'.
To toggle between the brushing modes:
- Press the power on/off button once to turn on the
toothbrush.
- Press a second time within 5 seconds to change the
brushing mode.
- After the toothbrush has been on five seconds, if you
want to change modes, you'll need to turn the
toothbrush off, then on and press the power on/off
button within 5 seconds.
EasyStart
This Philips Sonicare model comes with the EasyStart
feature activated. The EasyStart feature gently increases
the power over the first 14 brushings to help you get
used to the brushing with the Philips Sonicare.
To deactivate EasyStart see 'Activating or deactivating
features'.
Brush head replacement reminder
Your Philips Sonicare is equipped with BrushSync
technology that tracks the wear of your brush head. This
feature gives you the guarantee for the best cleaning and
care of your teeth.
Note: This feature only works with Philips Sonicare smart
brush heads with BrushSync technology.
14 English
New
Brush Head
1When a new smart brush head is attached for the first
time, the handle recognizes that you have a Philips
brush head with BrushSync technology and the
display shows the brush head symbol.
Replace
Brush Head
2Over time, based on the pressure you apply and how
long the brush head has been used, the handle will
track brush head wear in order to determine the
optimal time to change your brush head. When the
life of the brush head ends, the display shows the
brush head replacement reminder symbol and
indicates that you should replace the brush head as
soon as possible.
Pressure Sensor
Your Philips Sonicare is equipped with an advanced
sensor that measures the pressure you apply while
brushing. If you apply too much pressure, the toothbrush
provides immediate feedback to indicate that you need
to adjust the pressure. When you apply too much
pressure, the light ring at the bottom of the handle lights
up orange.
QuadPacer
2
4
3
1
The QuadPacer is an interval timer that has a short beep
and pause to remind you to brush the 4 sections of your
mouth evenly and thoroughly. This Philips Sonicare
toothbrush comes with the QuadPacer feature activated.
SmarTimer
The SmarTimer indicates that your brushing cycle is
complete by automatically turning off the toothbrush at
the end of the brushing cycle.
Dental professionals recommend brushing no less than 2
minutes twice a day.
15
English
Note: If you press the power on/off button after you
started the brushing cycle, the toothbrush will pause.
After a pause of 15 seconds, the SmarTimer resets.
Toothbrushing reports
Your Philips Sonicare regularly provides a report on your
toothbrushing behavior.
After brushing the display shows a brushing report with
the brushing time.
- Brushing time of 2 minutes or more
- Brushing time of less than 2 minutes
Gum Pro
0
:
4 5
- During brushing the display shows the current
brushing mode and brushing time.
Activating or deactivating features
You can activate or deactivate the following features of
your toothbrush:
- EasyStart
- Brush head replacement reminder
To activate or deactivate these features, follow the
instructions below:
EasyStart
1Put the handle on the plugged-in charger.
2Keep the power on/off button pressed until you hear
a single short beep.
16 English
3Release the power on/off button.
EasyStart
ON
- Triple tone of low-medium-high means the EasyStart
feature has been activated. The icon on the display
shows that the EasyStart has been activated.
EasyStart
OFF
- Triple tone of high-medium-low means the EasyStart
feature has been deactivated. The icon on the display
shows that the EasyStart has been deactivated.
Note: To achieve clinical efficacy, EasyStart needs to be
deactivated.
Brush head replacement reminder
Note: You can only activate or deactivate the brush head
replacement reminder when a smart brush head is on the
handle.
1Put the handle on the plugged-in charger.
2Press and hold the power on/off button while the
handle remains on the charger.
Brush Head
Reminder
ON
3Keep the power on/off button pressed until you hear
two short beeps.
4Release the power on/off button.
- Triple tone of low-medium-high means the brush
head replacement reminder feature has been
activated. The icon on the display shows that the
brush head replacement reminder has been activated.
Brush Head
Reminder
OFF
- Triple tone of high-medium-low means the brush
head replacement reminder feature has been
deactivated. The icon on the display shows that the
brush head replacement reminder has been
deactivated.
Cleaning
You should clean your Philips Sonicare toothbrush
regularly to remove toothpaste and other residue. Failure
17
English
to clean your Philips Sonicare toothbrush may result in an
unhygienic product and damage to it may occur.
Warning: Do not clean the product or accessories
with sharp objects or in the dishwasher,
microwave, with chemicals or in boiling hot water
Toothbrush handle
1Remove the brush head and rinse the metal shaft area
with warm water. Make sure you remove any residual
toothpaste.
Caution: Do not push on the rubber seal on the metal
shaft with sharp objects, as this may cause damage.
2Wipe the entire surface of the handle with a damp
cloth.
Note: Do not tap the handle on the sink to remove excess
water.
Brush head
1Rinse the brush head and bristles after each use.
2Remove the brush head from the handle and rinse the
brush head connection with warm water at least once
a week. Rinse the travel cap as often as needed.
Charger
1Unplug the charger before you clean it.
2Wipe the surface of the charger with a damp cloth.
Storage
If you are not going to use the product for a long time,
unplug it, and clean it (see chapter 'Cleaning'). Store it in
a cool and dry place away from direct sunlight.
Charge the toothbrush regularly to prevent the battery
from discharging completely. A completely discharged
battery may fail to charge again.
18 English
Replacement
Brush head
Replace Philips Sonicare brush heads every 3 months to
achieve optimal results. Use only Philips Sonicare
replacement brush heads.
Troubleshooting
This chapter summarizes the most common problems
you could encounter with the appliance. If you are
unable to solve the problem with the information below,
visit www.philips.com/support for a list of frequently
asked questions or contact the Consumer Care Center in
your country.
Problem Possible cause Solution
I cannot fully attach the
brush head. There is a
gap between the brush
head and handle.
This is normal. A small
gap is necessary to
allow movement in
order to deliver the
vibrations needed to
clean your teeth.
My Philips Sonicare
toothbrush vibration is
less powerful than
before.
The brush head is too
close to the body of the
handle.
Remove the brush head
from the handle and re-
set it on the metal shaft
leaving small gap.
(1-2mm)
The battery is low. Charge the toothbrush
handle on the charger.
I have charged my
toothbrush, but it only
works for a short time.
The toothbrush handle
is not placed vertically
on the charger,
resulting in no charge.
Place handle vertically
on charger base and
make sure the charger is
plugged in.
The toothbrush stops
working.
The battery is empty. Charge the toothbrush
handle on the charger.
Locating the model number
Look on the bottom of the Philips Sonicare toothbrush
handle for the model number (HX379X).
19
English
Warranty and support
If you need information or support, please visit
www.philips.com/support or read the international
warranty leaflet.
Warranty restrictions
The terms of the international warranty do not cover the
following:
- Brush heads.
- Damage caused by use of unauthorized replacement
parts.
- Damage caused by misuse, abuse, neglect, alterations
or unauthorized repair.
- Normal wear and tear, including chips, scratches,
abrasions, discoloration or fading.
Recycling
- This symbol means that electrical products and
batteries shall not be disposed of with normal
household waste.
- Follow your country’s rules for the separate collection
of electrical products and batteries.
Removal of built-in rechargeable battery
Li-ion rechargeable battery
The built-in rechargeable battery is non-replaceable, and
must only be removed by a qualified professional at the
end of its life. Before removing the battery, make sure
that the appliance is disconnected from the wall socket
and that the battery is completely empty.
Take any necessary safety precautions when you
handle tools to open the appliance and when you
dispose of the rechargeable battery.
When you handle batteries, make sure that your
hands, the product and the batteries are dry.
To avoid accidental short-circuiting of batteries
after removal, do not let battery terminals come
20 English
into contact with metal objects (e.g. coins,
hairpins, rings). Do not wrap batteries in
aluminum foil. Tape battery terminals or put
batteries in a plastic bag before you discard them.
Before removing the battery, make sure that the battery
is completely empty.
To remove the rechargeable battery, you need a
flat‑head (standard) screwdriver.
1To deplete the rechargeable battery of any charge,
remove the handle from the charger, turn on the
Philips Sonicare and let it run until it stops. Repeat this
step until you can no longer turn on the Philips
Sonicare.
2Remove the film at the bottom of handle, then
release the screw.
3Remove the end cap from the toothbrush handle.
4Holding the handle upside down, press the shaft
down on a hard surface.
5Wedge the screwdriver between the battery and the
white frame at the bottom of the internal
components. Then pry the screwdriver away from the
battery to break the bottom of the white frame.
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/