说明书递交文档
设 计
DESIGN
程磊
2018.04.12
校 对
CO.BY
李士梅
图号/物料编码 PART NO.
标准化
STANDARD
图纸名称 PART NAME
材料 MATERIAL
80g双胶纸
业务
seller
图样
标记
REL
版本号
REV.NO
.
重量
(g)
WEIGHT
比例
scale
批 准
AUTHORIZ
E
曾磊 11 1:1
美的冰箱事业部
MIDEA REFRIGERATION
DIVISION
共 页
TOTAL
SHEETS
第 页
NO. OF SHEETS
技术要求
标记
M
ARKER
变
更内容 修改日期 签名
英国 BUSH M55143TFW
CE-BD160CM-SQ
22031010000761
说明书
①
2
1、
尺寸：32K。28P。
页码2、29、30和封底更新，自MO-591659起更新 2018.05.29 程磊
自MO-782594起更新版本 2019.04.23 汪凯阁
2、 印刷颜色：黑色
3、制件必须满足QMB-J53.005 产品说明书及其它类似印刷件技术规范。
5、需要符合美的冰箱事业的最新版《QMB-GC08.007 有害物质管理规定》的限值要求。
6、产品需经过封样合格后方可进行批量生产。
7、封底右下角印刷9号宋体物料编码，页边距为20mm
16131000A29927
M55143TFW
www.bush-support.com
25
26
27
13
12
19
19
19
22
22
23
23
9
10
12
2
3
5
1
4
1. Thermostat
2. Top freezer flap (4 star ng)
3. Freezer drawers (4 star
4. Bo om freezer flap (2 star
5. Adjustable Feet
Ice Tray x 1
13
1. Remove the right top hinge cover with a flat
headed screwdriver.
Right top hinge cover
2. Remove the le top hinge cover and the screws
that fix the right top hinge in
place with a cross headed
screwdriver. Remove the hinge and the door.
2 screwsLe top hinge cover
3 . Remove the top hinge and the boom door limit
from opening at a greater
appliance and door.
block (this is to stop the door
angle than allowed) and fix them on the le side on the
i.
Remove the hinge from the appliance,
then remove the
the hinge
(use a spanner to remove
. Flip over the hinge bracket
and reinsert the
(please see the image below).
Do not fix the
hinge in to place at this stage (please see step 7).
pin and washer from
the washer)
washer and pin
Pin & washer
You must ensure you change the axis of the hinge
ii. Remove the door limit block from the boom of the door
screw and fix it to the le hand side.
by removing the
4. Remove screw A and fix it in to posion A, then remove
screw B and fix it in to
posion B.
Posion AScrew A Screw BPosion B
5. Replace the right top hinge cover.
2 screw holes Right top hinge cover
6. Tilt the appliance no more than 45 degrees and remove the
right boom hinge
by removing the 3 screws with a cross
adjustable foot on the
the le side with the screws and put the adjustable foot on the
right hand side.
headed screwdriver. Then remove the
le side by unscrewing it by hand. Fix the boom hinge to
Boom hinge assembly
7. Posion the door on the boom hinge and then set the door
posion at the top. Put the pin of the hinge in to the
hinge on the le hand side and fix it in
Ensure the door is
aligned horizontally and
finally
in the correct
door and then install the top
place with 2 screws.
vercally so that the seals are closed on all sides before
ghtening the top hinge.
8. Install the le top hinge cover.
Le top hinge cover
9. Change the side of the door the handle is installed on.
Check that the door opens and shuts correctly aer
you have completed the door
reversal process.
The appliance must now be upright for a minimum
of 3 hours before turning it on.
19
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
ページが読み込まれています...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
