Tascam LA-322322XLR ユーザーマニュアル

カテゴリー
テレビ
タイプ
ユーザーマニュアル

このマニュアルも適しています

»
LA-322
The LA-322 is a balanced XLR-type connector assembly
designed for the TASCAM 322 Double Auto Reverse
Cassette Deck, allowing balanced input/output.
Mounting procedure
1Remove the deck's cover by removing nine screws.
2Remove the deck's two blanking panels by removng
the screws (six screws for each).
3Remove the following three connectors. [Refer to Fig. 1.]
1. Connector (2-pin to 2-pin) connecting P808 and
P809 on the AN_SW PCB
2. Connector (4-pin) at P 12 on the main PCB
3. Connector (3-pin) at P 14 on the main PCB
WARNING
To avoid electric shock or other accidents, be sure to
refer the installation of the LA-322 to qualified
service personnel. The user should not attempt its
installation. In no event shall TASCAM/TEAC be liable for
any consequential accidents, damages both personal
and material, or any other troubles caused by breach of
this warning.
DECK 2
DECK 1/COMMON
M
AIN PCB
AN_SW PCB
P808
P809
P12
P14
Fig. 1
DECK 2
DECK 1/COMMON
INPUT
OUTPUT
INPU
T
OUTPUT
M
AIN PCB
AN_SW PCB
P810
P808
P809
P12
P14
P13
P15(White)
P16 (Red)
B
A
A
B
LA-322
LA-322
Blue:1, White:2
To P15
Red:1, White:2
To P16
To P808, P809,
P810
To P12, P13, P14
Fig. 2
»
LA-322
4There are two LA-322 units: One is for DECK
1/COMMON and the other is for DECK 2.
LA-322 for DECK 1/COMMON is the one with the
blue/white line at B.
LA-322 for DECK 2 is the one with the red/white line at
B.
5Referring to Fig. 2, connect wires through the rear
panel.
6Mount each LA-322 to 322 using the screws removed in
step 2.
Keep the screws and the blanking panels removed
from the 322 earlier, for possible future use.
TEAC CORPORATION
  • Page 1 1
  • Page 2 2

Tascam LA-322322XLR ユーザーマニュアル

カテゴリー
テレビ
タイプ
ユーザーマニュアル
このマニュアルも適しています

他の言語で