4460217

Thrustmaster 4460217, 2960853, 2960858, TCA, TM-TCAQUAD ユーザーマニュアル

  • Thrustmaster TCA Quadrant Add-On Airbus EditionとTCA Quadrant Airbus Editionのマニュアルの内容を理解しました。これらのスロットルクアドラントに関するご質問にお答えします。接続方法、設定、機能、トラブルシューティングなど、何でもお気軽にご質問ください。
  • 拡張モジュールを使用するにはどうすればよいですか?
    軸のデテント(段付き)を無効にするにはどうすればよいですか?
    摩擦を調整するにはどうすればよいですか?
    PCに接続するにはどうすればよいですか?
    バーチャルボタンとは何ですか?
Europe, Middle East
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ITALIANO
ESPAÑOL
PORTUGUÊS
РУССКИЙ
ČESTINA
TÜRKÇE
POLSKI
SVENSKA
SUOMI
SLOVENCINA
MAGYAR NYELV
תירבע
ﺔﻴﺑﺮﻌﻟا
North America/
Norteamérica
ENGLISH
FRANÇAIS
ESPAÑOL
Latin America/
América Latina
ENGLISH
ESPAÑOL
PORTUGUÊS
Asia Pacic
日本語
简体中文
繁體中文
ENGLISH
1/14
User manual
TECHNICAL FEATURES
5
6
1
2
3
4
7
8
9
2/14
9
9
8
1. Speed brake (air brake) axis
2. 4 detents on the axis + 5 virtual
buttons
3. 6 action buttons
4. Flaps axis
5. 4 detents on the axis
6. 4 action buttons
7. Friction adjustment screw on each
module
8. Mechanism to disable/enable the
detents on each axis
9. SATA connectors for TCA Quadrant
Airbus Edition (sold separately)
3/14
CONNECTING THE TCA QUADRANT ADD-ON AIRBUS
EDITION MODULES TO THE TCA QUADRANT AIRBUS
EDITION*
*Sold separately
In order to use the TCA Quadrant Add-On Airbus Edition modules, you must own a TCA
Quadrant Airbus Edition (sold separately). The TCA Quadrant Add-On Airbus Edition
modules are an extension of the TCA Quadrant Airbus Edition throttle quadrant, and only
work when connected to both sides of the TCA Quadrant Airbus Edition.
This modularity adds new axes and action buttons, and lets you extend the kinematics
(takeoff, in-flight and landing) of the TCA Quadrant Airbus Edition.
1. Turn all of the devices upside down and, using a screwdriver with the corresponding head
shape (not included), screw on the four attachment pieces included with the TCA
Quadrant Airbus Edition and the TCA Quadrant Add-On Airbus Edition modules, to attach
everything together.
2. Connect the speed brake module to the left of the TCA Quadrant Airbus Edition and the
flaps module to the right, using the SATA cables included with the TCA Quadrant Add-On
Airbus Edition.
*
+
1 1
1
2
1 1
2
2
4/14
- To avoid damaging the products, use a screwdriver with the corresponding head shape
(not included) to tighten/untighten the screws.
- Only use the official cables provided by Thrustmaster: this will allow you to update the
firmware for the TCA Quadrant Airbus Edition when necessary.
- Never position the TCA Quadrant Airbus Edition with either of the TCA Quadrant Add-On
Airbus Edition modules hanging near or off the edge of a table or desk.
5/14
INSTALLATION ON PC
1. Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant
Airbus Edition (or TCA Quadrant Add-On Airbus Edition), and select Drivers.
Download and install the PC driver and its customized interface for the Windows Control
Panel.
2. Once the PC driver has been installed, connect the USB connector for the TCA Quadrant
Airbus Edition to one of the USB ports on your PC.
3. To access the Control Panel, click Start / Apps / Thrustmaster / Control Panel (in
Windows® 10 / 8.1 / 8).
The Game Controllers dialog box appears.
The accessory is listed onscreen with the name TCA Q-Eng 1&2 (or TCA Q-Eng 3&4,
depending on the position of the selector switch for the engines [5] on the TCA Quadrant
Airbus Edition), along with OK status.
4. In the Game Controllers dialog box, click Properties to test and view all features,
including those related to the TCA Quadrant Add-On Airbus Edition modules.
Enable virtual buttons: This feature lets you enable or disable the virtual buttons available
on the axes for the throttle quadrant, and the speed brake module. Click Apply once you
have selected the mode you want to use.
You are now ready to play!
- In order to use the TCA Quadrant Add-On Airbus Edition modules, you must own a TCA
Quadrant Airbus Edition (sold separately).
- Visit https://support.thrustmaster.com to download the package containing the drivers
allowing you to update the product’s firmware, providing you with more detailed control of
the product’s features.
6/14
MAPPING OF THE TCA QUADRANT ADD-ON AIRBUS EDITION
MODULES’ 15 BUTTONS AND 2 AXES
27
28
29
30
31
0 up
ZR
65536 down
0 up
Z
65536 down
7/14
MAKING CHANGES TO THE AXES ON THE TCA QUADRANT
ADD-ON AIRBUS EDITION MODULES
The TCA Quadrant Add-On Airbus Edition modules feature mechanical selectors allowing
you to disable the detents/notches on each axis. Doing so allows you to have smooth axes,
while maintaining virtual buttons 27 through 31 on the speed brake module.
This option lets you change the piloting sensations according to the type of aircraft being
used in your simulation (commercial aircraft or civil aircraft).
1. Turn the TCA Quadrant Add-On Airbus Edition modules upside down, and unscrew the
two screws for each of the selectors using a screwdriver with the corresponding head
shape (not included).
2. Switch the position of the selectors, using the indicators as a guide: this will let you
choose either a smooth axis, or an axis with detents/notches, for each axis on the TCA
Quadrant Add-On Airbus Edition modules.
8/14
ADJUSTING THE FRICTION
IMPORTANT NOTES:
- The friction on the TCA Quadrant Add-On Airbus Edition modules is set to 50% by
default.
- In order to allow for precise adjustment according to your preferences, you can use a
screwdriver with the corresponding head shape (not included) or the crossbar included
with the TCA Quadrant Airbus Editionto turn the friction adjustment screws.
1. Push both TCA Quadrant Add-On Airbus Edition module levers forward to their maximum
values, and then access the friction adjustment screw at the back of each module.
2. To increase the friction, turn the friction adjustment screw clockwise.
3. To decrease the friction, turn the friction adjustment screw counterclockwise.
- To avoid damaging the friction system, be careful not to over-tighten the adjustment
screws: stop turning the screws when you feel resistance.
- Never completely unscrew the adjustment screws, to avoid the screws falling inside the
body of either TCA Quadrant Add-On Airbus Edition module.
9/14
ATTACHING THE TCA QUADRANT AIRBUS EDITION* AND
THE TCA QUADRANT ADD-ON AIRBUS EDITION MODULES
TO THE TM FLYING CLAMP*, A COCKPIT* OR OTHER
STATIONARY SURFACE
*Sold separately
You can use the 6 perforations located on the underside of the TCA Quadrant Airbus
Edition, when connected to the TCA Quadrant Add-On Airbus Edition modules, to attach all
of the devices to a stationary surface, using M6 screws (not included).
Attachment diagram for the TM Flying Clamp* (*sold separately):
10/14
T.A.R.G.E.T ADVANCED PROGRAMMING SOFTWARE
(Thrustmaster Advanced pRogramming Graphical EdiTor)
Please visit https://support.thrustmaster.com. Click Joysticks / TCA Quadrant Airbus
Edition (or TCA Quadrant Add-On Airbus Edition), then select Software. Download and
install the T.A.R.G.E.T advanced programming software.
Main features of T.A.R.G.E.T:
- Different possible configurations for the axes.
- Different possible programming levels: Basic, Advanced and Script.
- Use of the Drag and Drop principle.
- Ability to combine the TCA Quadrant Airbus Edition throttle quadrant with various
Thrustmaster joysticks (HOTAS Cougar, HOTAS Warthog, T.16000M, MFD Cougar
Pack, all of which are also compatible with T.A.R.G.E.T), allowing them to be recognized
as a single USB device.
- Access to advanced profiles created by the Thrustmaster community.
11/14
TROUBLESHOOTING AND WARNING
Visit https://support.thrustmaster.com to download the package containing the
drivers allowing you to update the product’s firmware, providing you with more detailed
control of the product’s features.
My TCA Quadrant Add-On Airbus Edition modules aren’t working properly, or seem
to be improperly calibrated, when connected to the TCA Quadrant Airbus Edition.
- Visit https://support.thrustmaster.com to check whether a more recent firmware
version is available: if so, follow the instructions to download and install it.
- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus
Edition throttle quadrant. Make sure that both SATA cables are properly connected to
the devices.
- Power off your PC, and disconnect the USB connector for the TCA Quadrant Airbus
Edition throttle quadrant. Then reconnect the USB connector, power on your PC
again, and restart your game.
- When connecting the USB connector for the TCA Quadrant Airbus Edition throttle
quadrant, always leave the rudder axis centered if you are using the TFRP rudder
system (sold separately): never put your feet on the TFRP rudder system’s pedals
when doing so.
I can’t configure my TCA Quadrant Add-On Airbus Edition modules with my TCA
Quadrant Airbus Edition throttle quadrant.
- In your game’s Options / Controller / Gamepad or Joystick menu, select the
appropriate configuration or completely reconfigure the controller’s options.
- Visit https://support.thrustmaster.com to check whether a more recent firmware
version is available: if so, follow the instructions to download and install it.
- For more information, please refer to your game’s user manual or online help.
- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical
EdiTor) advanced programming software.
My TCA Quadrant Add-On Airbus Edition modules are too sensitive, or not
sensitive enough.
- The axes for the TCA Quadrant Add-On Airbus Edition modules automatically
calibrate themselves after a few movements, and after having reached the physical
stops for the axes.
- In your game’s Options / Controller / Gamepad or Joystick menu, adjust the sensitivity
and dead zones for your controller (if these options are available).
- You can also use the T.A.R.G.E.T (Thrustmaster Advanced pRogramming Graphical
EdiTor) advanced programming software.
These devices are intended for use with respect to gaming entertainment purposes
only. It is strictly forbidden to use these devices for professional training activities.
12/14
CONSUMER WARRANTY INFORMATION
Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P.
97143, 35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster
product shall be free from defects in materials and workmanship, for a warranty period which corresponds
to the time limit to bring an action for conformity with respect to this product. In the countries of the
European Union, this corresponds to a period of two (2) years from delivery of the Thrustmaster product.
In other countries, the warranty period corresponds to the time limit to bring an action for conformity with
respect to the Thrustmaster product according to applicable laws of the country in which the consumer
was domiciled on the date of purchase of the Thrustmaster product (if no such action exists in the
corresponding country, then the warranty period shall be one (1) year from the original date of purchase of
the Thrustmaster product).
Notwithstanding the above, rechargeable batteries are covered by a warranty period of six (6) months
from the date of original purchase.
Should the product appear to be defective during the warranty period, immediately contact Technical
Support, who will indicate the procedure to follow. If the defect is confirmed, the product must be returned
to its place of purchase (or any other location indicated by Technical Support).
Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option,
be either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is
subject to such reconditioning, any period of at least seven (7) days during which the product is out of use
shall be added to the remaining warranty period (this period runs from the date of the consumer’s request
for intervention or from the date on which the product in question is made available for reconditioning, if
the date on which the product is made available for reconditioning is subsequent to the date of the request
for intervention). If permitted under applicable law, the full liability of Guillemot and its subsidiaries
(including for consequential damages) is limited to the return to working order or the replacement of the
Thrustmaster product. If permitted under applicable law, Guillemot disclaims all warranties of
merchantability or fitness for a particular purpose.
This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered
damage as a result of inappropriate or abusive use, negligence, an accident, normal wear, or any other
cause unrelated to a material or manufacturing defect (including, but not limited to, combining the
Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable
batteries, chargers, or any other elements not supplied by Guillemot for this product); (2) if the product has
been used for any use other than home use, including for professional or commercial purposes (game
rooms, training, competitions, for example); (3) in the event of failure to comply with the instructions
provided by Technical Support; (4) to software, said software being subject to a specific warranty; (5) to
consumables (elements to be replaced over the product’s lifespan: disposable batteries, audio headset or
headphone ear pads, for example); (6) to accessories (cables, cases, pouches, bags, wrist-straps, for
example); (7) if the product was sold at public auction.
This warranty is nontransferable.
The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her
country are not affected by this warranty.
13/14
Additional warranty provisions
During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support
is the only party authorized to open and/or recondition any Thrustmaster product (with the exception of
any reconditioning procedures which Technical Support may request that the consumer carry out, by way
of written instructions for example, due to the simplicity and the lack of confidentiality of the
reconditioning process and by providing the consumer with the required spare part(s), where
applicable).
Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not
provide, in principle, any reconditioning notification or spare parts for any Thrustmaster product whose
warranty period has expired.
In the United States of America and in Canada, this warranty is limited to the product’s internal
mechanism and external housing. In no event shall Guillemot or its affiliates be held liable to any third
party for any consequential or incidental damages resulting from the breach of any express or implied
warranties. Some States/Provinces do not allow limitation on how long an implied warranty lasts or
exclusion or limitation of liability for consequential or incidental damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from State to State or Province to Province.
Liability
If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries
disclaim all liability for any damages caused by one or more of the following: (1) the product has been
modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive
use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any
use other than home use, including for professional or commercial purposes (game rooms, training,
competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all
liability for any damages unrelated to a material or manufacturing defect with respect to the product
(including, but not limited to, any damages caused directly or indirectly by any software, or by combining
the Thrustmaster product with any unsuitable element, including in particular power supplies,
rechargeable batteries, chargers, or any other elements not supplied by Guillemot for this product).
DECLARATION OF CONFORMITY
CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
14/14
COPYRIGHT
© 2022 Guillemot Corporation S.A. All rights reserved. Thrustmaster® is a registered trademark of
Guillemot Corporation S.A. Windows® is a registered trademark of Microsoft Corporation in the United
States and/or other countries.
AIRBUS, its logo and product and service marks are registered trademarks of Airbus. All rights reserved.
© Airbus 2022. All rights reserved. Officially licensed by Airbus.
All other trademarks and brand names are hereby acknowledged and are property of their respective
owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice
and may vary from one country to another. Made in China.
ENVIRONMENTAL PROTECTION RECOMMENDATION
In the European Union: At the end of its working life, this product should not be disposed
of with standard household waste, but rather dropped off at a collection point for the
disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.
This is confirmed by the symbol found on the product, user manual or packaging.
Depending on their characteristics, the materials may be recycled. Through recycling and
other forms of processing Waste Electrical and Electronic Equipment, you can make a
significant contribution towards helping to protect the environment.
Please contact your local authorities for information on the collection point nearest you.
For all other countries: Please adhere to local recycling laws for electrical and electronic equipment.
Retain this information. Colors and decorations may vary.
Plastic fasteners and adhesives should be removed from the product before it is used.
www.thrustmaster.com
*Applicable to EU, UK and Turkey only
*
TECHNICAL SUPPORT
https://support.thrustmaster.com
*
WARNING: this product can expose you to chemicals including Bisphenol A (BPA), which is
known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
1/14
Manuel de l'utilisateur
CARACTERISTIQUES TECHNIQUES
5
6
1
2
3
4
7
8
9
2/14
9
9
8
1. Axe Speedbrake (aérofreins)
2. 4 détentes sur l’axe + 5 boutons
virtuels
3. 6 boutons d’action
4. Axe Flaps (volets)
5. 4 détentes sur l’axe
6. 4 boutons d’action
7. Vis d’ajustement de la friction sur
chaque module
8. Mécanismes de désactivation des
crans sur chaque axe
9. Connecteurs SATA pour TCA
Quadrant Airbus Edition (vendu
séparément)
3/14
CONNECTER LES MODULES TCA QUADRANT ADD-ON AU TCA
QUADRANT AIRBUS EDITION*
*Vendu séparément
Pour utiliser les TCA Quadrant Add-On Airbus Edition, vous devez faire l’acquisition préalable
d’un TCA Quadrant Airbus Edition (vendu séparément). Les modules TCA Quadrant Add-On
Airbus Edition sont une extension de la manette des gaz TCA Quadrant Airbus Edition et ne
fonctionnent que lorsqu’ils sont connectés de part et d’autre de la manette des gaz TCA
Quadrant Airbus Edition.
Cette modularité ajoute de nouveaux axes et boutons d’action et permet d’étendre les
cinématiques de décollage, de vol et d’atterrissage de la manette des gaz TCA Quadrant
Airbus Edition.
1. Retournez le TCA Quadrant et vissez, à l’aide d’un tournevis, les quatre pièces
de fixation fournies avec la manette des gaz TCA Quadrant Airbus Edition et les
modules TCA Quadrant Add-On Airbus Edition pour solidariser l’ensemble.
2. Connectez les modules Speedbrake à gauche et Flaps à droite à l’aide des câbles
SATA fournis avec le TCA Quadrant Add-On Airbus Edition.
*
+
1 1
1
2
1 1
2
2
4/14
- Pour éviter d’endommager le produit, utilisez un tournevis pour serrer les vis d’ajustement.
- Seuls les câbles officiels fournis par Thrustmaster doivent être utilisés afin de pouvoir mettre
à jour le firmware du TCA Quadrant Airbus Edition le cas échéant.
- Evitez de placer le TCA Quadrant Airbus Edition avec les modules en charnière sur le bord
d’une table.
5/14
INSTALLATION SUR PC
1. Allez sur https://support.thrustmaster.com/. Cliquez sur Joysticks / TCA Quadrant
Airbus Edition (ou TCA Quadrant Add-On Airbus Edition), puis sélectionnez Pilotes.
Téléchargez et installez le pilote PC et son interface personnalie du Control Panel Windows.
2. Une fois le pilote PC installé, branchez le connecteur USB sur l’un des ports USB de votre PC.
3. Pour accéder au Control Panel, sélectionnez Démarrer / Applications / Thrustmaster /
Control Panel ou Panneau de configuration (sous Windows® 10 / 8.1 / 8)
La boîte de dialogue Contrôleurs de jeu s’affiche.
L’accessoire apparaît à l’écran sous le nom TCA Q-Eng 1&2 (ou TCA Q-Eng 3&4, selon la
position du lecteur 5 sur le TCA Quadrant Airbus Edition) et l’état OK.
4. Dans la boîte de dialogue Contrôleurs de jeu, cliquez sur Propriétés pour tester et
visualiser l’ensemble des fonctions qui incluent le TCA Quadrant Add-On Airbus Edition.
Enable virtual buttons (Activer les boutons virtuels) : Cette fonction permet d’activer ou
de désactiver les boutons virtuels présents sur les axes de la manette des gaz ou du module
Speedbrake. Cliquez sur Apply (Appliquer) après avoir sélectionné le mode souhaité.
Vous êtes maintenant prêt à jouer !
- Pour utiliser le TCA Quadrant Add-On Airbus Edition, vous devez faire l’acquisition préalable
d’un TCA Quadrant Airbus Edition.
- Téléchargez sur le support en ligne le package contenant les pilotes permettant de mettre à
jour le firmware et d’avoir un contrôle plus détaillé sur les fonctionnalités du produit.
/