ϔ৮ 喟下ݖ⊓⩢०䷻
ಸत 喟)1
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ 喟䄤㻮ϔ৮᱙Ҁ
ϔౝ 喟͚పᎬ͉͉㣋
⤍⊤㏼≻➦ࡧ下ݖ⊓უᏚ⩢கᰶ䭽ڙथ
͚ప⤍⊤ጯ̶▣䩴⥡ⴠጒ͇ࡧ
ڕప䶫ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍
© 2016 Koninklijke Philips N.V.
保留所有权利
3140 035 34554
English
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
• WARNING: Do not use this
appliance near water.
• When the appliance is used in
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched o.
• WARNING: Do not use
this appliance near
bathtubs, showers,
basins or other vessels
containing water.
在以下网站注册并获得支持
www.philips.com.cn/welcome
HP8260
• Always unplug the appliance
after use.
• If the appliance overheats,
it switches o automatically.
Unplug the appliance and let
it cool down for a few minutes.
Before you switch the appliance
on again, check the grilles to
make sure they are not blocked
by u, hair, etc.
• If the mains cord is damaged,
you must have it replaced by
a service centre or similarly
qualied persons in order to
avoid a hazard.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• For additional protection, we
advise you to install a residual
current device (RCD) in the
electrical circuit that supplies
the bathroom. This RCD must
have a rated residual operating
current not higher than 30mA.
Ask your installer for advice.
• Inserting metal objects into
the grilles is a hazard and may
cause electric shock.
• Never block the air grilles.
• Before you connect the
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
• Do not use the appliance
for any other purpose than
described in this manual.
• Do not use the appliance on
articial hair.
• When the appliance is
connected to a power supply,
never leave it unattended.
• Never use any accessories or
parts from other manufacturers
or that Philips does not
specically recommend. If you
use such accessories or parts,
your warranty is invalidated.
• Do not wind the power cord
round the appliance.
• Wait until the appliance cooled
down completely before you
store it.
• Do not pull on the power cord
after using. Always unplug the
appliance by holding the plug.
• Do not operate the appliance
with wet hands.
• Always return the appliance to
a service centre authorized by
Philips for examination or repair.
Repair by unqualied people
could result in an extremely
hazardous situation for the user.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in at
an ocial collection point for recycling. By doing this,
you help to preserve the environment.
2 Introduction
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com.cn/welcome.
The Philips ProCare hairdryer is
designed with advanced Philips EHD
(Even Heat Distribution) Technology ™.
The dryer uses a uniquely designed air
outlet (using an EHD fan-shaped grille,
see below gure) to ensure that heat
is always distributed very evenly, even
at high temperatures, and prevents
damaging hot spots. This gives advanced protection to
the hair from overheating and thus helps to keep your hair
healthy and shiny.
3 Dry your hair
1 Connect the plug to a power supply socket.
• For precise drying, attach the concentrator ( b ) onto
the hairdryer. The concentrator enables you to direct
the airow straight at the brush or comb with which
you are styling your hair.
• To enhance volume for curls and bouncy style, attach
the diuser ( a ) onto the hairdryer. The volume
diuser has been specially developed to gently dry
both straight and curly or wavy hair. To add volume at
the roots, insert the pins into your hair in such a way
that they touch your scalp. Make rotating movements
with the appliance to distribute the warm air evenly
through your hair.
• To disconnect the attachment, pull it o the hairdryer.
2 Adjust the airow switch ( d ) and temperature switch
( e ) to suitable positions.
Switch Settings Function
Temperature
Quick dry
Dry shower-wet hair
quickly.
Thermoprotect
Provides the optimal
drying temperature
and gives additional
protection from
overheating the hair.
Gently dry the hair.
Airow
Strong airow and fast
drying.
Gentle airow and
styling.
Switch o.
EN User manual
ZH-CN 用户手册
3 Press the cool shot button ( c ) for cool airow to x
your style.
4 The appliance is equipped with ion function, which
provides additional shine and reduces frizz.
» When the function is on, a special odor may be
smelt. It is normal and caused by the ions which are
generated.
• To turn the ion function on or o, slide the IONIC switch
( f ) to or .
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Remove the concentrator or diuser before you clean the
appliance.
4 Clean the appliance by damp cloth.
5 Keep it in a safe and dry place, free of dust.
4 Guarantee and service
If you need information e.g. about replacement of an
attachment or if you have a problem, please visit the Philips
website at www.philips.com/support or contact the Philips
Customer Care Centre in your country. The phone number is
in the worldwide guarantee leaet. If there is no Consumer
Care Centre in your country, go to your local Philips dealer.
5 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at all.
The power socket
to which the
appliance has been
connected may be
broken.
Check the appliance is
plugged in correctly.
Check the fuse for this
power socket in your
home.
The appliance may
have overheated
and switched
itself o.
Unplug the appliance
and let it cool down
for a few minutes.
Before you switch on
the appliance again,
check the grilles to
make sure they are
not blocked by u,
hair, etc.
The appliance may
not be suitable
for the voltage to
which it has been
connected.
Ensure that the
voltage indicated on
the type plate of the
appliance corresponds
to the local power
voltage.