Bose MediaMate® computer speakers 取扱説明書

Owner’s Guide

Brugervejledning

Bedienungsanleitung

Gebruikershandleiding

Guía del usuario

Käyttöohje

Notice d’utilisation

Manuale di istruzioni

Kezelési útmutató

Brukerveiledning

Podręcznik użytkownika

Manual do Proprietário

Bruksanvisning

Руководство владельца

NOISE-MASKING

SLEEPBUDS

™

IMPORTANT SAFETY INSTRUCTIONS

2

|

ENG

Please read and keep all safety and use instructions.

Important Safety Instructions

1. To avoid accidental ingestion, keep the sleepbuds™ away from children and pets. The sleepbuds™ contain a

silver-zinc battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When

not in use, store the sleepbuds™ in the charging case with the charging lid closed, and keep out of the reach of

children and pets.

2. Do NOT allow children to use the sleepbuds™.

3. Clean the sleepbuds™ and charging case only with a dry cloth. For additional cleaning instructions,

see page 31.

4. Only use attachments/accessories speciﬁed by the manufacturer.

WARNINGS/CAUTIONS

• When using this product, basic precautions should always be followed, including the following:

– Read all the instructions before using the charging case.

– To reduce the risk of injury, close supervision is necessary when the charging case is used near children.

– Do not expose charging case to water, rain, liquids or snow.

– Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of

ﬁre or injury to persons.

– Do not use the charging case in excess of its output rating.

– Do not use a charging case that is damaged or modiﬁed. Damaged or modiﬁed batteries may exhibit

unpredictable behavior resulting in ﬁre, explosion or risk of injury.

– Do not disassemble the charging case. Incorrect reassembly may result in risk of ﬁre or injury to persons.

– Do not open, crush or expose a charging case to ﬁre or excessive temperature. Exposure to ﬁre or temperature

above 212° F, 100° C may cause explosion.

– Have servicing performed by a qualiﬁed repair person using only identical replacement parts.

• Do NOT use your sleepbuds™ at any time in which the inability to hear surrounding sounds may present a danger to

yourself or others. If engaging in any activity requiring attention to your surroundings (e.g., attending to children,

driving, riding a bicycle or walking in or near trac, a construction site or railroad, etc.), remove the sleepbuds™ or

adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.

• Do NOT submerge the sleepbuds™ in water. Do NOT expose the sleepbuds™ to moving water (e.g., from a

faucet, etc.). Do NOT wear the sleepbuds™ while showering or bathing, or when participating in water sports,

e.g., swimming, waterskiing, surﬁng, etc.

IMPORTANT SAFETY INSTRUCTIONS

3

|

ENG

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• Do NOT expose this product to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases,

on or near the product.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles,

on or near the product.

• Do NOT make unauthorized alterations to this product.

• Use this product only with the power supply provided.

• The provided power supply has not been tested for use at altitudes greater than 2000 meters.

仅适用于 2000m 以下地区安全使用

Use at altitude less than 2000 meters only.

• If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made,

seek medical advice.

• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, ﬁre or the like).

REGULATORY INFORMATION

4

|

ENG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and Industry Canada radiation exposure limits set forth for general population.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC ID: A94424611

IC: 3232A-424611

CAN ICES-3 (B)/NMB-3(B)

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliance

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

DON’T attempt to remove the rechargeable batteries from this product. Contact your local Bose retailer or other

qualiﬁed professional for removal.

REGULATORY INFORMATION

5

|

ENG

Please dispose of used batteries properly, following local regulations. Do not incinerate.

Removal of the rechargeable batteries in this product should be conducted

only by a qualiﬁed professional. Please contact your local Bose retailer or see

http://products.bose.com/static/compliance/index.html for further information.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

Taiwan Restriction of Hazardous Substances Table

Equipment name: Bose noise-masking sleepbuds™, Type designation: 424611

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury (Hg) Cadmium (Cd)

Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers (PBDE)

PCBs

- ○ ○ ○ ○ ○

Metal Parts

- ○ ○ ○ ○ ○

Plastic Parts

○ ○ ○ ○ ○ ○

Speakers

- ○ ○ ○ ○ ○

Cables

- ○ ○ ○ ○ ○

Note 1:

“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

REGULATORY INFORMATION

6

|

ENG

Please complete and retain for your records

The serial number is located on the bottom of the charging case.

Serial number: ____________________________________________________________________

Model number: 424611

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to http://global.Bose.com/register

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “9” is 2009 or 2019.

China Importer

: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

Input Rating: 5V 150mA

Charging temperature range: 41° F – 113° F (5° C – 45° C)

Discharging temperature range: 41° F – 113° F (5° C – 45° C)

LEGAL INFORMATION

7

|

ENG

Android, Google Play, and the Google Play logo are trademarks of Google LLC.

Bose, Sleepbuds, Bose Noise Masking Sleepbuds, and StayHear are trademarks of Bose Corporation.

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a

service mark of Apple Inc.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

CONTENTS

8

|

ENG

BOSE SLEEP APP

Features .............................................................................................................................. 11

STAY AWARE OF YOUR SURROUNDINGS

Set an appropriate volume.......................................................................................... 12

Tips for maintaining awareness ................................................................................. 12

Basic tips .................................................................................................................... 12

Advanced tips .......................................................................................................... 12

WHAT’S IN THE CARTON

Contents ............................................................................................................................. 13

CONTROLS

Open the charging case ............................................................................................... 14

Power on ............................................................................................................................ 15

Power o ............................................................................................................................ 15

Call functions .................................................................................................................... 16

Phone Call Alerts .................................................................................................... 16

Answer a phone call .............................................................................................. 16

SECURE FIT

Choose the correct StayHear+ Sleep tips ............................................................. 17

Fit the sleepbuds™ in your ear ................................................................................... 18

Check your StayHear+ Sleep tip size ...................................................................... 19

Change the StayHear+ Sleep tips............................................................................. 20

CONTENTS

9

|

ENG

BATTERY

Charge the sleepbuds™ ................................................................................................ 21

Charging time........................................................................................................... 22

Check the battery levels of the sleepbuds™ ................................................ 22

Charge the case ............................................................................................................... 23

Charging time........................................................................................................... 23

Check the case battery level .............................................................................. 24

Battery protection .......................................................................................................... 24

SLEEPBUDS™ STATUS

Sleepbuds™ charging lights ........................................................................................ 25

Charging case battery lights ...................................................................................... 26

BLUETOOTH

®

CONNECTIONS

Connect your mobile device....................................................................................... 28

Disconnect a mobile device ........................................................................................ 28

Reconnect a mobile device ......................................................................................... 28

ADVANCED FEATURES

Phone-Free Mode ........................................................................................................... 29

Dark Mode for the Bose Sleep app .......................................................................... 29

Reset the charging case ............................................................................................... 30

Update the charging case ........................................................................................... 30

CONTENTS

10

|

ENG

CARE AND MAINTENANCE

Clean the sleepbuds™ and charging case ............................................................. 31

Replacement parts and accessories ........................................................................ 31

Limited warranty ............................................................................................................. 31

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 32

Other solutions ................................................................................................................ 32

11

|

ENG

BOSE SLEEP APP

Download the free Bose Sleep app, which you’ll need to control your sleepbuds™,

select masking sounds, manage wake-up alarms and Phone Call Alerts, adjust volume

and conﬁgure advanced settings.

FEATURES

• Select masking sounds to play through your sleepbuds™.

• Add new sounds or replace sounds that you don’t listen to using the

Sound Library.

• Set wake-up alarms.

• Name your sleepbuds™.

• Manage settings for Phone Call Alerts.

• Enable Dark Mode for nighttime use.

• Find answers to frequently asked questions.

• Keep your sleepbuds™ up to date and try new features with the latest software.

12

|

ENG

STAY AWARE OF YOUR SURROUNDINGS

The sleepbuds™ are designed to mask noise and disturbances while you sleep.

Because of this, they can aect your ability to hear other sounds, such as alarms,

warning systems, people and pets.

SET AN APPROPRIATE VOLUME

To balance the levels of noise masking and awareness you want, set an appropriate

volume level for your needs. The volume should be high enough to mask noises that

are disturbing your sleep, but not so high that you can’t hear the sounds you want

to hear.

In the Bose Sleep app, set the volume to the lowest level, then increase it gradually

until you reach an appropriate level. The lower the volume, the more likely it is that

you’ll be able to hear the sounds you want or need to hear.

TIPS FOR MAINTAINING AWARENESS

If you’re concerned about your ability to hear sounds while wearing the sleepbuds™,

try the following tips.

Basic tips

• If you sleep with a partner, consider relying on your partner to help you stay aware

of your surroundings while wearing the sleepbuds™.

Advanced tips

These tips make the sleepbuds™ less eective at masking noise, but further increase

your awareness of your surroundings.

• Wear only one sleepbud™.

• Set your current masking sound so that it stops after a certain amount of time

instead of playing all night. You can do this by setting a sleep timer for your current

masking sound in the Bose Sleep app.

13

|

ENG

WHAT’S IN THE CARTON

CONTENTS

Conﬁrm that the following parts are included:

Bose noise-masking sleepbuds™ Portable charging case Travel bag

StayHear+ Sleep tips:

Large (black) and small (white)

NOTE: Medium (gray) tips

are attached to the

sleepbuds™.

USB power supply* AC power adapters*

USB cable

* The USB power supply and AC power adapters may vary slightly. Use the AC power

adapter for your region.

NOTE: If any part of your product is damaged, do not use it. Contact your authorized

Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/Sleepbuds

14

|

ENG

CONTROLS

OPEN THE CHARGING CASE

With the Bose logo facing you, slide the lid of the charging case away from you

to open.

Lights on the inside rim of the case glow to show the current battery level and

charging status of the case and sleepbuds™ (see page 25).

CONTROLS

15

|

ENG

POWER ON

Remove the sleepbuds™ from the charging case.

The sleepbuds™ automatically power on.

POWER OFF

Place the sleepbuds™ in the charging case.

For information about how to properly store the sleepbuds™, see “Charge the

sleepbuds™” on page 21.

The sleepbuds™ automatically power o, and the corresponding charging lights blink

white (see “Sleepbuds™ charging lights” on page 25).

CONTROLS

16

|

ENG

CALL FUNCTIONS

To use the sleepbuds™ for call functions:

• Turn o Do Not Disturb on your mobile device. The sleepbuds™ follow your device

Do Not Disturb setting.

• Set up Phone Call Alerts using the Bose Sleep app.

Once set, you can receive alerts through the sleepbuds™ and answer phone calls with

your mobile device.

NOTE: Your sleepbuds™ use Bluetooth Low Energy to connect to your device and

may periodically disconnect during the night. If you receive a call when your

sleepbuds™ are disconnected, you won’t receive Phone Call Alerts.

Phone Call Alerts

Phone Call Alerts are notiﬁcations sent through the sleepbuds™ that wake you when a

phone call comes in.

To enable Alerts and manage volume/sound settings, tap the gear icon in the Bose

Sleep app.

Answer a phone call

Use your mobile device to answer calls. You can’t answer phone calls with

the sleepbuds™.

1. Remove the sleepbuds™ from your ears.

2. Answer the call on your mobile device.

17

|

ENG

SECURE FIT

CHOOSE THE CORRECT STAYHEAR+ SLEEP TIPS

For optimal noise masking and stability, it is important to choose the correct size

StayHear+ Sleep tip. Select the size that gives you the best comfort and ﬁt in each ear.

To determine the best ﬁt, you may need to try all three sizes. You may need a dierent

size for each ear.

NOTE: To test the ﬁt of your current StayHear+ Sleep tip size, see page 19.

Each sleepbud™ and StayHear+ Sleep tip is marked with either an L or an R. Make sure

to insert the left sleepbud™ into the left tip and the right sleepbud™ into the right tip.

SECURE FIT

18

|

ENG

FIT THE SLEEPBUDS™ IN YOUR EAR

The StayHear+ Sleep tip lets the sleepbud™ rest comfortably and securely in your ear.

The tip wing ﬁts just under your ear ridge.

1. Place the sleepbud™ in your ear with the Bose logo facing outwards.

2. Rotate the sleepbud™ back, locking it in place.

3. Press the tip wing to tuck it underneath your ear ridge.

Ear ridge

Tip wing

NOTE: Be gentle when placing the sleepbuds™ in your ears. The eartip should

be deep enough in your ear to create a seal but not so deep that it

feels uncomfortable.

SECURE FIT

19

|

ENG

CHECK YOUR STAYHEAR+ SLEEP TIP SIZE

To check if your current StayHear+ Sleep tip size is right for you, use a mirror or ask

a friend to compare your ﬁt to the size guide below. The tip wing should ﬁt securely

under your ear ridge without being compressed.

Proper ﬁt Too big Too small

In addition, try the following:

• Try speaking aloud. Your voice should sound mued in both ears.

• Shake your head. The sleepbuds™ should stay secure.

If your current tip size doesn’t feel secure, select another size.

NOTE: For information about changing the tips, see page 20.

SECURE FIT

20

|

ENG

CHANGE THE STAYHEAR+ SLEEP TIPS

1. Holding the base of the attached StayHear+ Sleep tip, peel the tip back and gently

slide the sleepbud™ out of the tip.

2. Align the raised line near the opening of the new StayHear+ Sleep tip with the

groove on the nozzle on the sleepbud™. Slide the nozzle into the opening. Then,

gently stretch the base of the tip around the back of the sleepbud™ to hold the

sleepbud™ in place.

Sleepbuds™ nozzle

Opening

NOTE: Make sure to insert the left sleepbud™ into the left tip and the right

sleepbud™ into the right tip (see page 17).

3. Make sure that the sleepbud™ is correctly oriented in the tip. The Bose logo on the

sleepbud™ should face outwards and be right-side up, and both charging contacts

should be visible through the back of the tip.

ページを読み込んでいます...

Bose MediaMate® computer speakers 取扱説明書

関連論文