noise masking sleepbuds

Bose noise masking sleepbuds 取扱説明書

  • こんにちは!Boseノイズマスキングスリープバッズ424611ユーザーマニュアルの内容を理解しています。このデバイスの機能、使用方法、トラブルシューティングなど、ご質問にお答えします。マニュアルには、騒音マスキング機能、着信通知、バッテリー充電方法、清掃方法などが記載されています。お気軽にご質問ください!
  • スリープバッズの充電方法は?
    スリープバッズのバッテリー残量を確認するには?
    周囲の音を聞こえるようにするには?
    スリープバッズを清掃するには?
    電話の着信通知を受け取るには?
Owner’s Guide
Brugervejledning
Bedienungsanleitung
Gebruikershandleiding
Guía del usuario
Käyttöohje
Notice d’utilisation
Manuale di istruzioni
Kezelési útmutató
Brukerveiledning
Podręcznik użytkownika
Manual do Proprietário
Bruksanvisning
Руководство владельца
NOISE-MASKING
SLEEPBUDS
IMPORTANT SAFETY INSTRUCTIONS
2
|
ENG
Please read and keep all safety and use instructions.
Important Safety Instructions
1. To avoid accidental ingestion, keep the sleepbuds™ away from children and pets. The sleepbuds™ contain a
silver-zinc battery, and may be hazardous if swallowed. If ingested, seek immediate medical attention. When
not in use, store the sleepbuds™ in the charging case with the charging lid closed, and keep out of the reach of
children and pets.
2. Do NOT allow children to use the sleepbuds™.
3. Clean the sleepbuds™ and charging case only with a dry cloth. For additional cleaning instructions,
see page 31.
4. Only use attachments/accessories specified by the manufacturer.
WARNINGS/CAUTIONS
When using this product, basic precautions should always be followed, including the following:
– Read all the instructions before using the charging case.
– To reduce the risk of injury, close supervision is necessary when the charging case is used near children.
– Do not expose charging case to water, rain, liquids or snow.
– Use of a power supply or charger not recommended or sold by power pack manufacturer may result in a risk of
fire or injury to persons.
– Do not use the charging case in excess of its output rating.
– Do not use a charging case that is damaged or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk of injury.
– Do not disassemble the charging case. Incorrect reassembly may result in risk of fire or injury to persons.
– Do not open, crush or expose a charging case to fire or excessive temperature. Exposure to fire or temperature
above 212° F, 100° C may cause explosion.
– Have servicing performed by a qualified repair person using only identical replacement parts.
Do NOT use your sleepbuds™ at any time in which the inability to hear surrounding sounds may present a danger to
yourself or others. If engaging in any activity requiring attention to your surroundings (e.g., attending to children,
driving, riding a bicycle or walking in or near trac, a construction site or railroad, etc.), remove the sleepbuds™ or
adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
Do NOT submerge the sleepbuds™ in water. Do NOT expose the sleepbuds™ to moving water (e.g., from a
faucet, etc.). Do NOT wear the sleepbuds™ while showering or bathing, or when participating in water sports,
e.g., swimming, waterskiing, surfing, etc.
IMPORTANT SAFETY INSTRUCTIONS
3
|
ENG
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might aect your
implantable medical device.
Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases,
on or near the product.
Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles,
on or near the product.
Do NOT make unauthorized alterations to this product.
Use this product only with the power supply provided.
The provided power supply has not been tested for use at altitudes greater than 2000 meters.
仅适用于 2000m 以下地区安全使用
Use at altitude less than 2000 meters only.
If the battery leaks, do not allow the liquid to come in contact with the skin or eyes. If contact is made,
seek medical advice.
Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
REGULATORY INFORMATION
4
|
ENG
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate
this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC ID: A94424611
IC: 3232A-424611
CAN ICES-3 (B)/NMB-3(B)
Bose Corporation hereby declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The
complete declaration of conformity can be found at: www.Bose.com/compliance
For Europe:
Frequency band of operation 2400 to 2483.5 MHz:
Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.
This symbol means the product must not be discarded as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and recycling of this product, contact
your local municipality, disposal service, or the shop where you bought this product.
Management Regulation for Low-power Radio-frequency Devices
Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by
the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter
original characteristic as well as performance to an approved low power radio-frequency devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If
found, the user shall cease operating immediately until no interference is achieved. The said legal communications
means radio communications operated in compliance with the Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM
radio wave radiated devices.
DON’T attempt to remove the rechargeable batteries from this product. Contact your local Bose retailer or other
qualified professional for removal.
REGULATORY INFORMATION
5
|
ENG
Please dispose of used batteries properly, following local regulations. Do not incinerate.
Removal of the rechargeable batteries in this product should be conducted
only by a qualified professional. Please contact your local Bose retailer or see
http://products.bose.com/static/compliance/index.html for further information.
  
China Restriction of Hazardous Substances Table
Names and Contents of Toxic or Hazardous Substances or Elements
Toxic or Hazardous Substances and Elements
Part Name
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
(CR(VI))
Polybrominated
Biphenyl
(PBB)
Polybrominated
diphenylether
(PBDE)
PCBs X O O O O O
Metal Parts X O O O O O
Plastic Parts O O O O O O
Speakers X O O O O O
Cables X O O O O O
This table is prepared in accordance with the provisions of SJ/T 11364.
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part
is below the limit requirement of GB/T 26572.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials
used for this part is above the limit requirement of GB/T 26572.
Taiwan Restriction of Hazardous Substances Table
Equipment name: Bose noise-masking sleepbuds™, Type designation: 424611
Restricted substances and its chemical symbols
Unit
Lead
(Pb)
Mercury (Hg) Cadmium (Cd)
Hexavalent
chromium (Cr+6)
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers (PBDE)
PCBs
-
Metal Parts
-
Plastic Parts
Speakers
-
Cables
-
Note 1:
” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value
of presence.
Note 2: The “−” indicates that the restricted substance corresponds to the exemption.
REGULATORY INFORMATION
6
|
ENG
Please complete and retain for your records
The serial number is located on the bottom of the charging case.
Serial number: ____________________________________________________________________
Model number: 424611
Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.
You can easily do this by going to http://global.Bose.com/register
Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “9” is 2009 or 2019.
China Importer
: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China
(Shanghai) Pilot Free Trade Zone
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan
Phone Number: +886-2-2514 7676
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000
México, D.F. Phone Number: +5255 (5202) 3545
Input Rating: 5V 150mA
Charging temperature range: 41° F – 113° F (5° C – 45° C)
Discharging temperature range: 41° F – 113° F (5° C – 45° C)
LEGAL INFORMATION
7
|
ENG
Android, Google Play, and the Google Play logo are trademarks of Google LLC.
Bose, Sleepbuds, Bose Noise Masking Sleepbuds, and StayHear are trademarks of Bose Corporation.
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such
marks by Bose Corporation is under license.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a
service mark of Apple Inc.
Bose Corporation Headquarters: 1-877-230-5639
©2019 Bose Corporation. No part of this work may be reproduced, modified, distributed or otherwise used without
prior written permission.
CONTENTS
8
|
ENG
BOSE SLEEP APP
Features .............................................................................................................................. 11
STAY AWARE OF YOUR SURROUNDINGS
Set an appropriate volume.......................................................................................... 12
Tips for maintaining awareness ................................................................................. 12
Basic tips .................................................................................................................... 12
Advanced tips .......................................................................................................... 12
WHAT’S IN THE CARTON
Contents ............................................................................................................................. 13
CONTROLS
Open the charging case ............................................................................................... 14
Power on ............................................................................................................................ 15
Power o ............................................................................................................................ 15
Call functions .................................................................................................................... 16
Phone Call Alerts .................................................................................................... 16
Answer a phone call .............................................................................................. 16
SECURE FIT
Choose the correct StayHear+ Sleep tips ............................................................. 17
Fit the sleepbuds™ in your ear ................................................................................... 18
Check your StayHear+ Sleep tip size ...................................................................... 19
Change the StayHear+ Sleep tips............................................................................. 20
CONTENTS
9
|
ENG
BATTERY
Charge the sleepbuds™ ................................................................................................ 21
Charging time........................................................................................................... 22
Check the battery levels of the sleepbuds™ ................................................ 22
Charge the case ............................................................................................................... 23
Charging time........................................................................................................... 23
Check the case battery level .............................................................................. 24
Battery protection .......................................................................................................... 24
SLEEPBUDS™ STATUS
Sleepbuds™ charging lights ........................................................................................ 25
Charging case battery lights ...................................................................................... 26
BLUETOOTH
®
CONNECTIONS
Connect your mobile device....................................................................................... 28
Disconnect a mobile device ........................................................................................ 28
Reconnect a mobile device ......................................................................................... 28
ADVANCED FEATURES
Phone-Free Mode ........................................................................................................... 29
Dark Mode for the Bose Sleep app .......................................................................... 29
Reset the charging case ............................................................................................... 30
Update the charging case ........................................................................................... 30
CONTENTS
10
|
ENG
CARE AND MAINTENANCE
Clean the sleepbuds™ and charging case ............................................................. 31
Replacement parts and accessories ........................................................................ 31
Limited warranty ............................................................................................................. 31
TROUBLESHOOTING
Try these solutions first ................................................................................................ 32
Other solutions ................................................................................................................ 32
11
|
ENG
BOSE SLEEP APP
Download the free Bose Sleep app, which you’ll need to control your sleepbuds™,
select masking sounds, manage wake-up alarms and Phone Call Alerts, adjust volume
and configure advanced settings.
FEATURES
Select masking sounds to play through your sleepbuds™.
Add new sounds or replace sounds that you don’t listen to using the
Sound Library.
Set wake-up alarms.
Name your sleepbuds™.
Manage settings for Phone Call Alerts.
Enable Dark Mode for nighttime use.
Find answers to frequently asked questions.
Keep your sleepbuds™ up to date and try new features with the latest software.
12
|
ENG
STAY AWARE OF YOUR SURROUNDINGS
The sleepbuds™ are designed to mask noise and disturbances while you sleep.
Because of this, they can aect your ability to hear other sounds, such as alarms,
warning systems, people and pets.
SET AN APPROPRIATE VOLUME
To balance the levels of noise masking and awareness you want, set an appropriate
volume level for your needs. The volume should be high enough to mask noises that
are disturbing your sleep, but not so high that you can’t hear the sounds you want
to hear.
In the Bose Sleep app, set the volume to the lowest level, then increase it gradually
until you reach an appropriate level. The lower the volume, the more likely it is that
you’ll be able to hear the sounds you want or need to hear.
TIPS FOR MAINTAINING AWARENESS
If you’re concerned about your ability to hear sounds while wearing the sleepbuds™,
try the following tips.
Basic tips
If you sleep with a partner, consider relying on your partner to help you stay aware
of your surroundings while wearing the sleepbuds™.
Advanced tips
These tips make the sleepbuds™ less eective at masking noise, but further increase
your awareness of your surroundings.
Wear only one sleepbud™.
Set your current masking sound so that it stops after a certain amount of time
instead of playing all night. You can do this by setting a sleep timer for your current
masking sound in the Bose Sleep app.
13
|
ENG
WHAT’S IN THE CARTON
CONTENTS
Confirm that the following parts are included:
Bose noise-masking sleepbuds™ Portable charging case Travel bag
StayHear+ Sleep tips:
Large (black) and small (white)
NOTE:  Medium (gray) tips
are attached to the
sleepbuds™.
USB power supply* AC power adapters*
USB cable
* The USB power supply and AC power adapters may vary slightly. Use the AC power
adapter for your region.
NOTE: If any part of your product is damaged, do not use it. Contact your authorized
Bose dealer or Bose customer service.
Visit: worldwide.Bose.com/Support/Sleepbuds
14
|
ENG
CONTROLS
OPEN THE CHARGING CASE
With the Bose logo facing you, slide the lid of the charging case away from you
to open.
Lights on the inside rim of the case glow to show the current battery level and
charging status of the case and sleepbuds™ (see page 25).
CONTROLS
15
|
ENG
POWER ON
Remove the sleepbuds™ from the charging case.
The sleepbuds™ automatically power on.
POWER OFF
Place the sleepbuds™ in the charging case.
For information about how to properly store the sleepbuds™, see “Charge the
sleepbuds™” on page 21.
The sleepbuds™ automatically power o, and the corresponding charging lights blink
white (see “Sleepbuds™ charging lights” on page 25).
CONTROLS
16
|
ENG
CALL FUNCTIONS
To use the sleepbuds™ for call functions:
Turn o Do Not Disturb on your mobile device. The sleepbuds™ follow your device
Do Not Disturb setting.
Set up Phone Call Alerts using the Bose Sleep app.
Once set, you can receive alerts through the sleepbuds™ and answer phone calls with
your mobile device.
NOTE: Your sleepbuds™ use Bluetooth Low Energy to connect to your device and
may periodically disconnect during the night. If you receive a call when your
sleepbuds™ are disconnected, you won’t receive Phone Call Alerts.
Phone Call Alerts
Phone Call Alerts are notifications sent through the sleepbuds™ that wake you when a
phone call comes in.
To enable Alerts and manage volume/sound settings, tap the gear icon in the Bose
Sleep app.
Answer a phone call
Use your mobile device to answer calls. You can’t answer phone calls with
the sleepbuds™.
1. Remove the sleepbuds™ from your ears.
2. Answer the call on your mobile device.
17
|
ENG
SECURE FIT
CHOOSE THE CORRECT STAYHEAR+ SLEEP TIPS
For optimal noise masking and stability, it is important to choose the correct size
StayHear+ Sleep tip. Select the size that gives you the best comfort and fit in each ear.
To determine the best fit, you may need to try all three sizes. You may need a dierent
size for each ear.
NOTE: To test the fit of your current StayHear+ Sleep tip size, see page 19.
Each sleepbud™ and StayHear+ Sleep tip is marked with either an L or an R. Make sure
to insert the left sleepbud™ into the left tip and the right sleepbud™ into the right tip.
SECURE FIT
18
|
ENG
FIT THE SLEEPBUDS™ IN YOUR EAR
The StayHear+ Sleep tip lets the sleepbud™ rest comfortably and securely in your ear.
The tip wing fits just under your ear ridge.
1. Place the sleepbud™ in your ear with the Bose logo facing outwards.
2. Rotate the sleepbud™ back, locking it in place.
3. Press the tip wing to tuck it underneath your ear ridge.
Ear ridge
Tip wing
NOTE: Be gentle when placing the sleepbuds™ in your ears. The eartip should
be deep enough in your ear to create a seal but not so deep that it
feels uncomfortable.
SECURE FIT
19
|
ENG
CHECK YOUR STAYHEAR+ SLEEP TIP SIZE
To check if your current StayHear+ Sleep tip size is right for you, use a mirror or ask
a friend to compare your fit to the size guide below. The tip wing should fit securely
under your ear ridge without being compressed.
Proper fit Too big Too small
In addition, try the following:
Try speaking aloud. Your voice should sound mued in both ears.
Shake your head. The sleepbuds™ should stay secure.
If your current tip size doesn’t feel secure, select another size.
NOTE: For information about changing the tips, see page 20.
SECURE FIT
20
|
ENG
CHANGE THE STAYHEAR+ SLEEP TIPS
1. Holding the base of the attached StayHear+ Sleep tip, peel the tip back and gently
slide the sleepbud™ out of the tip.
2. Align the raised line near the opening of the new StayHear+ Sleep tip with the
groove on the nozzle on the sleepbud™. Slide the nozzle into the opening. Then,
gently stretch the base of the tip around the back of the sleepbud™ to hold the
sleepbud™ in place.
Sleepbuds™ nozzle
Opening
NOTE: Make sure to insert the left sleepbud™ into the left tip and the right
sleepbud™ into the right tip (see page 17).
3. Make sure that the sleepbud™ is correctly oriented in the tip. The Bose logo on the
sleepbud™ should face outwards and be right-side up, and both charging contacts
should be visible through the back of the tip.
/