How to use / 使用方法 /

English Stereo headphones

Compatible products

Use this unit with smartphones.

Notes



If you connect to an unsupported smartphone,

the microphone of this unit may not function,

or the volume level may be low.

Available operations for iPhone

Plays/pauses a track of the connected iPhone

product with a single press. Skips to the next track

with a double press. Skips to the previous track

with a triple press. Starts the “VoiceOver**” feature

with a long press (if available).

Hold down for about two seconds to reject an

incoming call. When you let go, two low beeps

confirm the call was rejected.

* The button function may vary depending on

Specifications

Headphones

Type: Open air, dynamic

Driver unit: 13.5 mm, dome type (CCAW

adopted)

Power handling capacity: 100 mW (IEC*)

Impedance: 16 Ω at 1 kHz

Sensitivity: 104 dB/mW

Frequency response: 18 Hz – 22,000 Hz

Cord: 1.2 m (Y-type)

Open circuit voltage level: –40 dB (0 dB = 1 V/

Pa)

Effective frequency range: 20 Hz – 20,000 Hz

Supplied accessories

Earpads (2)

* IEC = International Electrotechnical

Commission

If you install the Smart Key app* from Google

Play store, the track and volume adjustment on

your smartphone will be enabled with multi-

如果安裝 Google Play 商店中的 Smart Key 應

用程式

機上的曲目和音量調節。

*

iPhone is a trademark of Apple Inc., registered

in the U.S. and other countries.

Xperia is a trademark of Sony Mobile

Communications AB.

Android™ and Google Play™ are trademarks or

registered trademarks of Google, Inc.

Optional replacement earpads can be ordered

from your nearest Sony dealer.

Precautions

High volume may affect your

To minimise the effect, wear clothes made from

natural materials.

Microphone

Multi-function

button

少。