Note for the mounting
To secure the mounting on wall, a concrete
wall is required.
Use screws to mount the main unit on the wall
1 Use this sheet as a template. Mark the position of
the unit on the wall (as illustrated above), and then
drill two 6mm diameter holes.
2 Secure the 2 dowels and 2 screws (both supplied)
in the holes respectively. Leave a gap of 5 mm
between the head of the screw and the wall.
3 Hang the unit on the screws.
安裝的注意事項
要在牆上穩固安裝，需要混凝土牆壁。
使用螺絲，將主裝置安裝在牆上
1 使用此紙板作為模板。在牆上標記裝置的位
置（如上述所示），然後鑽兩個直徑為6毫
米的鑽孔。
2 分別在鑽孔穩固2顆木釘和2顆螺絲（均有
提供）。在螺絲頭與牆壁之間留下5毫米的
空隙。
3 將裝置掛在螺絲上。
掛牆安裝說明
於標記的鑽孔位置在牆上鑽孔。*
ENGLISH
中文
Wall mounting instructions
drill holes on wall at hole
positions marked.*
134 mm (5.28")
-
1
