2. エンターテインメント
  3. 楽器
  4. フォグマシン
  5. Antari
  6. SW-250
SW-250

Antari SW-250 ユーザーマニュアル

  • Antari SW-250/SW-250X スノーマシンのユーザーマニュアルの内容を読みました。このデバイスに関するご質問にお答えできます。マニュアルには安全上の注意、操作方法、メンテナンス、技術仕様などが詳細に書かれており、様々な機能や使用方法が解説されています。
  • スノー液は何を使用すれば良いですか？
    機械の電源を切る方法は？
    故障した場合はどうすれば良いですか？
    SW-250とSW-250Xの違いは？
SW-250 / SW-250X
Snow Machine
User Manual
- English
-中文
© 2023 Antari Lighting and Effects Ltd.
1. Introduction ................................................................................................................................................. 1
2. Safety Information ....................................................................................................................................... 1
3. Package Contents & Inspection ................................................................................................................... 2
4. Machine Details ........................................................................................................................................... 3
5. Technical Label Information ........................................................................................................................ 3
6. Snow Fluid ................................................................................................................................................... 3
7. Setting and Manual Operation ..................................................................................................................... 3
8. Control Settings ........................................................................................................................................... 4
9. DMX Connection ........................................................................................................................................ 5
10. SC-2 Cable Remote (Optional) .................................................................................................................... 5
11. W-1 Wireless Transmitter (Standard for SW-250) ....................................................................................... 6
12. WTR-10 Wireless Remote (Optional for SW-250X Only) .......................................................................... 6
13. Service and Maintenance ............................................................................................................................. 7
14. Technical Specifications .............................................................................................................................. 8
15. Warranty Disclaimer .................................................................................................................................... 8
16. Machine Dimension ..................................................................................................................................... 8
1. 前言 ............................................................................................................................................................. 9
2. 安全注意事項 ............................................................................................................................................. 9
3. 包裝內容與檢查 ....................................................................................................................................... 10
4. 機器訊息 .................................................................................................................................................... 11
5. 技術標籤資訊 ............................................................................................................................................ 11
6. 雪花水 ........................................................................................................................................................ 11
7. 設定與手動操作說明 ............................................................................................................................... 12
8. 控制設定 ................................................................................................................................................... 12
9. DMX 說明 ................................................................................................................................................. 13
10. SC-2 有線控制器(選配) ........................................................................................................................... 14
11. W-1 無線發射器(標配只限 SW-250) ....................................................................................................... 14
12. WTR-10 無線遙控器(選配只限 SW-250X)............................................................................................. 14
13. 維護和保養 ............................................................................................................................................... 16
14. 技術規格 ................................................................................................................................................... 16
15. 保固聲明 ................................................................................................................................................... 16
16. 機器尺寸圖 ............................................................................................................................................... 17
Appendix I – Grounding Instruction.................................................................................................................. 18
1
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at
all time. The manual includes how to install and operate the machine under safe condition and explain all the labels
printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER
If the danger is not avoided, it will cause death or serious injury
WARNING
If the warning is not heeded, it can cause death or serious injury.
CAUTION
If the precaution is not taken, it may cause minor or moderate injury.
Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may
cause serious consequences.
Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of
electrocution. For grounding instruction, please refer to Appendix I on page 18.
Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
When operating the machine, do not point at people, animals, or fire.
WARNING
Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space
around the machine and make sure there is no flammable gas or material nearby.
Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock
or result in fire.
The machine can only be operated by adults or professionals, is not intended for use by person with reduced
physical sensory, mental capabilities, or lack of experience and knowledge including children.
Do not leave the machine running unattended, make sure all powers are off when leaving.
Children should be supervised to ensure that they do not play with the machine.
Do not use the machine upside down or tilt it, it might cause damages or malfunction.
Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.
In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
CAUTION
Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or
moisture environment.
Please make sure the power outlet is not damaged or loose before plug in the power cord.
If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state
which could lead to overheat or malfunction.
Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using
original package)
The machine is for indoor use only.
2
Do not operate the machine in any area with unstable voltage.
If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant.
Do not contact any moving part.
Only use accessories recommended or sold by Antari.
Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Unplug from outlet before servicing or cleaning.
Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
Before operating the machine, please read all warning labels on the machine, description as below:
Rear Cover Printing
WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE.
USE ONLY WITH ADULT SUPERVISION.
DO NOT OPERATE WITHOUT LIQUID.
FOR INDOOR USE ONLY. KEEP DRY.
NO USER SERVICEABLE PARTS INSIDE.
3. Package Contents & Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct
model and all parts are included. If any part appears to be damaged or missing during transportation, please contact
your local dealer and return in original package for inspection.
3.1 Package Contents
SW-250
SW-250X
1 x SW-250 Wireless Snow Machine
1 x SW-250X Snow Machine
1 x 5 Liters Fluid Tank
1 x 5 Liters Fluid Tank
1 x IEC Connector (Power)
1 x IEC Connector (Power)
1 x W-1 Wireless Transmitter
1 x Hanging Bracket
1 x Hanging Bracket
1 x User Manual or Scan QR Code on the Machine
1 x User Manual or Scan QR Code on the Machine
3.2 Optional Accessories
Item Code
Description
SC-2
Cable Remote
WTR-10 (SW-250X Only)
Wireless Remote (W-1 Transmitter / W-1 Receiver)
SW-300-FB
Floor Bracket
3
4. Machine Details
01. Nozzle
06. LCD Display
02. Handle
07. XLR 5-Pin DMX
03. Hanging Bracket
08. XLR 4-Pin Remote Connector
04. 5 Liter Fluid Tank
09. Power Switch
05. Wireless Receiver/Expansion Socket (SW-250X)
10. IEC Connector (Power)
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Snow Fluid
CAUTION
Always turn off the power before filling the fluid tank. Do not add flammable
liquid to the fluid tank. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
Only the snow fluid manufactured by Antari can be used, do not mix or dilute the snow fluid.
The machine is tested and calibrated with the specific snow fluid to get the best performance.
Please empty the fluid in the tank before switching to another fluid to avoid mixing.
The warranty on your snow machine will be void if you use snow fluid not manufactured by Antari.
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open
space around the machine, and make sure there is no flammable gas or material nearby;
4
Step 2. Fill the fluid tank with Antari approved snow fluid;
Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and
make sure the power outlet is the correspond to the rated voltage for the machine;
Step 4. When the machine is ready, the LCD display will show “Ready to Snow”;
Step 5. To start making snow in Timer Mode, press [TIMER] and press [STOP] to stop; this will run based on
“interval” & “duration” setting in the main menu;
Step 6. Or to start making snow in Volume Mod, press [VOLUME] and press [STOP] to stop; you can adjust the
volume by pressing [UP] and [DOWN];
Step 7. To turn off the power, please make sure the machine is not operating. If you will not use the machine a
long period of time, please unplug the power cord.
8. Control Settings
SW-250 Wireless Snow Machine/SW-250 Snow Machine can be operated in the following modes. The machine
can only accept 1 type of signal at a time. When using different control modes at the same time, the machine will
work according to built-in control priority:
Manual
Timer
DMX512
Wireless
Cable Remote
8.1 Control Panel Description
SW-250 Wireless Snow Machine/SW-250X Snow Machine can be operated with the onboard digital control
interface.
Button
Operating Method
Function
MENU
Press
To enter setting menu
UP
Press
Increase value
DOWN
Press
Decrease value
TIMER
Press
1. Press to start making snow according to the set time
2. Press stop to stop making snow
VOLUME
Press
1. Press to start making snow according to set volume output
2. Press stop to stop making snow
STOP
Press
Stop / Return
5
8.2 Menu Options Description
Options
Description
Interval Set
Set Interval between 20 - 2000 sec
Duration Set
Set Duration between 10 - 200 sec
Timer Out
1-100%
Volume Out
1-100%
DMX512 Add.
001-512
Wireless ON
On (W showed on display) / Off (W not showed on display)
Quick Start
On / Off
9. DMX Connection
9.1 DMX Connector Pin Assignment
The machine has a XLR 5-Pin for DMX connection. The diagram below indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
**The cap on the DMX IN port is a protection cover.
Please remove it with your finger before operation.
9.2 DMX Setting
DMX Value
Function
0~10
Off
11~255
On (1-100%)
10. SC-2 Cable Remote (Optional)
SC-2 Cable Remote is an optional accessory for SW-250 Wireless Snow Machine/SW-250X Snow Machine, please
see instruction below;
6
1. Plug the timer cable remote to the connector on the back of the machine, green indicator light will light up;
2. Press the RED switch to turn on the power of the remote (Red Indicator Light is on) and press the RED switch
again to turn off the power (Red Indicator Light is off);
3. Turn the rotary knob to active the machine and adjust output volume.
Note:
** You must turn on the power of the remote in order to use it.
** If you encounter any problem, please contact your local Antari dealer for assistant.
11. W-1 Wireless Transmitter (Standard for SW-250)
W-1 Wireless Remote is a standard accessory for SW-250 Wireless Snow Machine. If you already purchased the
wireless model, it’s ready to use.
11.1 W-1 Wireless Transmitter
Battery：27A 12V
Effective Range：The effective range is approximately 50m,
depends on actual condition, it may vary.
W-1 wireless transmitter has 2 buttons, each function as follow:
W-1 Wireless Transmitter
Button
Function
[A]
Start
[B]
Stop
11.2 Pairing
Each receiver can pair up to 5 transmitters, please follow the steps below to pair;
Step 1. Turn on the power, “Wireless Setup” will show on the display for 15 seconds. Within this time period,
press button A on the W-1 transmitter to pair with the machine. When screen shows “Wireless Setup
OK”, means it’s paired;
Step 2. Please repeat Step 1 to pair multiple transmitters;
*If exceed 15 seconds, turn the power off and on again.
12. WTR-10 Wireless Remote (Optional for SW-250X Only)
WTR-10 Wireless Remote set is an optional accessory for SW-250X Snow Machine, it included a W-1 transmitter
and a W-1 receiver. If you purchase the WTR-10 Wireless Remote set afterwards, please follow the instruction
below. If you encounter any problem, please contact your local Antari dealer for assistant.
12.1 W-1 Wireless Transmitter & Receiver
Battery：27A 12V
Effective Range：The effective range is approximately 50m,
depends on actual condition, it may vary.
W-1 wireless transmitter has 2 buttons, each function as follow:
W-1 Wireless Transmitter
7
Button
Function
[A]
Start
[B]
Stop
W-1 Wireless Receiver
12.2 W-1 Wireless Receiver Installation
If you purchased the WTR-10 Wireless Remote set afterwards, please follow the instructions below to install the
receiver. If you encounter any problem, please contact your local Antari dealer for assistant.
Graph 1
Graph 2
Graph 3
1. Please see graph 1, remove the cover from the pointed place;
2. You will see a white cable like graph 2, pull it out and connect to the W-1 receiver;
3. Screw it back to the machine like graph 3 and follow the instruction on 12.3 for pairing.
12.3 Pairing
Each receiver can pair up to 5 transmitters, please follow the steps below to pair;
Step 1. Turn on the power, “Wireless Setup” will show on the display for 15 seconds. Within this time period,
press button A on the W-1 transmitter to pair with the machine. When screen shows “Wireless Setup
OK”, means it’s paired;
Step 2. Please repeat Step 1 to pair multiple transmitters;
*If exceed 15 seconds, turn the power off and on again.
13. Service and Maintenance
DANGER
Disconnect the power cord before starting maintenance operation!
Always keep the machine clean.
Can use an air compressor, a vacuum or a soft brush to remove the dust on the machine.
Can use a slightly damp cloth to clean the casing.
Before store or after each use of the machine, pump pure water through the system for at least 1-2 minutes,
this will help clean the snow fluid residue and extend the lifespan on the pump and the machine.
Before store or after each use, please make sure the fluid tank is clean and dry.
It is recommended to run the machine at least once a month in order to maintain its best performance and
output condition.
Excessive dust and build up liquid residue will reduce the performance and cause overheat.
8
14. Technical Specifications
SW-250
SW-250X
Rated Voltage
US Model: AC 100-120V, 50/60Hz 11.0A
EU Model: AC 220-240V, 50/60Hz 4.0A
Rated Power
120V 900W
240V 880W
Fluid Consumption
140 ml/min (100% output)
Fluid Tank Capacity
5 Liters (1.32 Gallon)
Compatible Fluid
Antari SL Snow & Foam Fluid、Antari SL-A Premium Snow Fluid、Antari SL-
N Snow & Foam Fluid (New Formula)、Antari SL-AN Premium Snow Fluid (New
Formula)、Antari SL-H Super Dry Snow Fluid、Antari SL-C Anti-Freezing Snow
Fluid、Antari SL-UV UV Snow Fluid
Ambient Temp. Range
5°C – 40°C (41°F – 104°F)
Control Methods
Manual、Timer、DMX512、Wireless
(Standard)、Cable Remote (Optional)
Manual、Timer、DMX512、Wireless
(Optional)、Cable Remote (Optional)
Interface
XLR 5-Pin (DMX)、XLR 4-Pin (Remote)、IEC (Power)
DMX Channels
1 Channel
Included Accessories
W-1 Transmitter、Hanging Bracket
Hanging Bracket
Optional Accessories
SC-2 Cable Remote、SW-300-FB Floor
Bracket
WTR-10 Wireless Remote、SC-2 Cable
Remote、SW-300-FB Floor Bracket
Dimension
L 539 W 276 H 310 mm (L 21.22 W 10.87 H 12.20 inch)
Weight
11.5 kg (25.35 lbs.)
15. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
16. Machine Dimension
9
中文使用說明書
1. 前言
在操作本機器之前，請務必仔細詳閱本說明書然後請將本說明書放置在機器使用者可隨時查閱之處存放。
此說明書包含如何安全的安裝及操作本機器以及說明所有在機器上的標示。如果您有任何操作上的問題，
請立即聯繫當地的 Antari 經銷商尋求協助。
2. 安全注意事項
危險
若不確實避免這些指示，可能導致嚴重人身傷害甚至死亡。
警告
若不確實遵循這些指示，可能導致嚴重人身傷害甚至死亡。
注意
若不確實注意這些指示，可能導致人身傷害甚至死亡，嚴重程度視情況而定。
危險
請務必使用正確電壓。如果使用錯誤電壓，可能會遭受危險的電擊燒傷或更嚴重的後果。
請務必將機器連結到有保護的電路，並確保有正確地接地，以避免觸電的危險。關於接地方式請參考
第18 頁附錄 I。
請勿在捆綁電源線的情況下使用，可能會發熱導致火災。
操作機器時請 勿 將 機 器 對 著 人 體 、動物或火 焰使用。
警告
請於堅固、平坦、穩定且通風良好的表面上使用機器。請勿遮蓋機器散熱部份，機器周邊至少應保留
50 公分的空間並確認附近沒有易燃性物質或可揮發性氣體。
請勿隨意拆卸、修理或改造機器，這可能會導致機器故障、損壞、觸電危險或造成火災。
本機器僅限有行為能力之成人或專業人員操作，不預期提供生理、感知、心智能力、經驗或知識不足
者之使用者(包含孩童)使用本機器。
請勿在無人看管時讓機器運作，並 於 外 出 離 去 時 確 實關閉 電 源 。
孩童應受監督，以確保孩童不能操作或嬉戲玩本機器。
請勿將機器放倒或傾斜使用，可能導致機器動作不正常或損壞。
請將液體存放在室內孩童無法取得之處，保持通風及避免陽光直射。如果有觸碰眼睛或誤食機器，請
立即尋求醫生的協助。
注意
本機器無防水設計，請隨時保持機器乾燥，嚴禁將其潑水、浸水、淋雨或放在潮溼的環境。
在插 入 電 源 插 座前 ，請確認電 源 插 座無損壞或鬆動。
若電源線損壞，必須使用原廠電源線或組件進行更換，否則將導致保固無效。
請在使用機器之前，先填裝好雪花水，避免機器幫浦空轉過熱造成損害。機器在搬運前或使用完畢
後，請清空油桶。
在運輸本機器前，請確認機器的油箱已清空並且包裝完整。(建議使用原廠包裝)
本產品僅限室內使用。
10
請勿在電壓不穩定的地區使用本機器。
如果機器出現異常聲音或有任何不正常現象時，請立即停止工作，將電源關閉及拔下機器電源線，並
請聯繫當地的 Antari 經銷商尋求協助。
請勿觸碰機器內部運轉零件。
只能使用原廠建議或販售之配件。
請確認機器不在使用的狀態下電源已關。如果長時間不使用機器，請拔掉電源線。
關閉機器時，將所以控制開關轉到關閉的位置，然後再將插頭從插座拔除。
拔除電源線時，請抓住插頭不是電線。
在保養及清潔前，請把電源線從插座拔除。
在電線或插座有損毀、機器故障或有掉落或損壞的情形發生時，請勿操作機器。請將機器送回最近的
維修站，做檢查、維修及電源或機械的調整。
在使用本機之前，請詳細閱讀機器上的警語標示，說明如下：
後蓋印刷
WARNING! 警告!
DISCONNECT POWER BEFORE CHANGING FUSE. 更換保險絲前請務必斷開電源
USE ONLY WITH ADULT SUPERVISION. 僅在成人監督下使用
DO NOT OPERATE WITHOUT LIQUID. 請勿在沒有液體的情況操作本機台
FOR INDOOR USE ONLY. KEEP DRY. 僅限室內使用 請保持乾燥
NO USER SERVICEABLE PARTS INSIDE. 內部無使用者可維修之零配件
3. 包裝內容與檢查
在收到機器後，請立即小心地打開包裝紙箱，檢查所有內容，確認您所購買的機型及配件。如果有任何部
件因運輸過程出現損壞或缺少，請立即連絡經銷商，並以原包裝退回檢查。
3.1 包裝內容
SW-250
SW-250X
1 x SW-250 無線雪花機
1 x SW-250 雪花機
1 x 五公升油桶
1 x 五公升油桶
1 x IEC 電源線
1 x IEC 電源線
1 x W-1 無線發射器
1 x 吊架
1 x 吊架
1 x 說明書或掃描機身 QR CODE
1 x 說明書或掃描機身 QR CODE
3.2 選配說明
品項
描述
SC-2
有線控制器
WTR-10 (只限 SW-250X)
無線控制器(W-1 發射器/W-1 接收器)
SW-300-FB
地板架
11
4. 機器訊息
01. 噴雪口
06. 液晶螢幕
02. 把手
07. XLR 5-Pin DMX 連接頭
03. 吊架
08. XLR 4-Pin 控制器連接頭
04. 五公升油桶
09. 電源開關
05. 無線接收器/擴充槽(只限 SW-250X)
10. IEC 電源線連接頭
5. 技術標籤資訊
使用本機器前，請詳閱技術標籤上的訊息
1. 機器型號
5. 斷路器/保險絲
2. 工作電壓
6. 說明書 QR CODE
3. 頻率
7. 機器流水序號
4. 瓦特數
6. 雪花水
危險
將液體加入機器之前，請務必先拔除電源線。請勿添加易燃液體。如果發現液體
流入機器內部，請洽 Antari 原廠或其經銷商尋求協助。
僅能使用 Antari 原廠製造之雪花水，不可混用或稀釋。
本機器是使用專屬的雪花水做測試與校正來取得最佳的效能。
如需更換另一種液體，請在使用前，先將油桶中的液體清空，以避免混合。
如果使用非原廠製造之雪花水而導致雪花機損壞將不在保固範圍內。
12
7. 設定與手動操作說明
警告
機台掉落可能會造成嚴重傷害，請確保本機台安裝牢固且不會掉落。
步驟1. 將機器平放在堅固、平坦、穩定且通風良好的表面上，機器周圍至少應保留 50 公分的空間並確
認附近沒有易燃性物質或可揮發性氣體;
步驟2. 將ANTARI 原廠雪花水倒入油桶;
步驟3. 將機器連接電源，連接之前，確認機器背後技術標籤上所標示要求功率，是否與電源插座相符;
步驟4. 當機器準備好可以進行操作時，液晶螢幕會顯示”Ready to Snow”;
步驟5. 欲在 Timer 模式下製造雪花，按一下控制面板上的[TIMER]；停止製造雪花，請按一下控制面板
上的[STOP] ，這會按照設定的“間隔時間” & “持續時間”來運轉;
步驟6. 或欲開 Volume 模式下製造雪花，按一下控制面板上的[VOLUME]；停止製造雪花，請按一下控
制面板上的[STOP] ，可以透過[UP]和[DOWN]鍵來調整雪花量;
步驟7. 需關閉本機時，請確認機器已停止運轉，再將電源開關關閉即可，長時間不使用時請移除電源
線。
8. 控制設定
SW-250 無線雪花機/SW-250X 雪花機可以使用下列操作模式，機器每次接受一種訊號
手動控制
定時控制
DMX512
無線控制
有線控制
8.1 控制面板說明
SW-250 無線雪花機/SW-250X 雪花機可以使用機器上的數位控制面板來操作。
按鈕
操作方式
動作
選單
按
進入設置選單
上
按
增加數值
下
按
減少數值
定時模式
按
1. 按一下啟動定時模式(根據設定好的間隔/輸出時間)
2. 按一下”停止”，停止製造雪花
13
輸出量模式
按
1. 按一下啟動輸出量模式(根據設定好的輸出量)
2. 按一下”停止”，停止製造雪花
停止/確認
按
1. 按一下確認設定
2. 按一下停止
8.2 選單說明
選單
敘述
Interval Set (間隔設定)
設定間隔時間 20 – 2000 秒
Duration Set (持續時間設定)
設定輸出時間 00 – 200 秒
Timer Out (定時模式)
0 – 100%
Volume Out (輸出量模式)
0 – 100%
DMX512 Add.
001 – 512
Wireless ON (無線功能)
開啟(W 顯示在螢幕) / 關閉(W 未顯示在螢幕)
Quick Start (迅速啟動)
開啟 / 關閉
9. DMX 說明
9.1 DMX 說明
本機可提供一個 XLR 5-PIN 的DMX 連接頭選擇。下為 PIN 的接點說明：
Pin
Function
1
接地
2
數據-
3
數據+
4
N/A
5
N/A
DMX IN 連接頭上的蓋子是一個保護蓋，操作前，
請用手指撥開即可輕鬆地將其取下。
9.2 DMX 通道功能設定
DMX 數值範圍
功能
0~10
關閉
11~255
開啟 (1-100%)
14
10. SC-2 有線控制器(選配)
SC-2 有線控制器是 SW-250 無線雪花機/SW-250X 雪花機的選購配件，使用方法如下;
1. 將有線定時控制器插入機器後方的接頭，綠色指示燈將會亮起;
2. 按下紅色按鈕開啟電源(紅色指示燈亮起); 如欲關閉控制器電源請再次按下紅色按鍵(紅色指示燈熄滅);
3. 旋轉旋鈕啟動機器並調整輸出量;
注意:
**務必開啟控制器電源才能使用。
**如果有任何問題，請聯繫當地的 Antari 經銷商尋求協助。
11. W-1 無線發射器(標配只限 SW-250)
W-1 無線發射器此為 SW-250 無線雪花機的標準配件。
11.1 W-1 無線發射器說明
發射器：使用 27A 12V 電池
收發距離：有效距離為 50 公尺，實際收訊狀況根據現場環境
因素而有所不同。
W-1 無線發射器配有 2個按鈕，控制功能為：
W-1 無線發射器
按鈕
功能
[A] 鍵
啓動
[B] 鍵
停止
11.2 配對
每個接收器可以配對最多五個發射器，請參考下列步驟進行配對;
步驟 1：當開啟機器電源後，”Wireless Setup”會在液晶螢幕上顯示約 15 秒鐘。在這時間內按下發射器上的
A鈕進行配對，配對成功後會顯示”Wireless Setup OK”;
步驟 2：如果要配對多個無線發射器，然後重複步驟 1即可。
*如果超過 15 秒鐘，將機器關閉重新開啟即可。
12. WTR-10 無線遙控器(選配只限 SW-250X)
WTR-10 無線遙控器組包含一個 W-1 無線發射器及 W-1 無線接收器，此為 SW-250X 雪花機的選購配件。若
是後續採購 WTR-10 無線遙控器組，請按照下方說明進行安裝與配對。如果遇到任何困難與問題，請與當
地的 Antari 經銷商尋求協助。
15
12.1 W-1 無線發射器&接收器說明
發射器：使用 27A 12V 電池
收發距離：有效距離為 50 公尺，實際收訊狀況根據現場環境
因素而有所不同。
W-1 無線發射器配有 2個按鈕，控制功能為：
W-1 無線發射器
按鈕
功能
[A] 鍵
啓動
[B] 鍵
停止
W-1 無線接收器
12.2 W-1 無線接收器安裝說明
如果是後續採購 WTR-10 無線控制器，請按照下方說明進行安裝與配對。如果遇到任何困難與問題，請與
當地的 Antari 經銷商尋求協助。
Graph 1
Graph 2
Graph 3
1. 請看圖一，取下蓋子;
2. 請看圖二，取下後，你會看到一條白色的線，請拉出來接在 W-2 接收器上;
3. 請看圖三，將接收器鎖回去原本的地方，然後按照 12.3 的步驟開始配對。
12.3 配對
每個接收器可以配對最多五個發射器，請參考下列步驟進行配對;
步驟 1：當開啟機器電源後，”Wireless Setup”會在液晶螢幕上顯示約 15 秒鐘。在這時間內按下發射器上的
A鈕進行配對，配對成功後會顯示”Wireless Setup OK”;
步驟 2：如果要配對多個無線發射器，然後重複步驟 1即可。
*如果超過 15 秒鐘，將機器關閉重新開啟即可。
16
13. 維護和保養
危險
維修保養之前，請務必拔除電源線！
隨時保持機器清潔。
可以使用空氣壓縮機、吸塵器或軟刷除去機器上的灰塵。
機殼可使用濕布擦拭。
儲藏前或使用完畢後，請在油桶內倒入清水，讓機器運行 1-2 分鐘，清潔機器內的殘餘雪花水，延長
機器使用的壽命。
儲藏前或使用完畢後，請將液體清空並保持乾燥。
建議每月至少讓機器運轉一次，以保持機器處於最佳的性能和輸出條件。
機器上過多的灰塵、液體殘餘累積的髒污會降低機器工作性能，導至散熱不良。
14. 技術規格
SW-250
SW-250X
電壓
美規：AC 100 - 120V, 50 / 60 Hz 11.0A
歐規：AC 220 - 240V, 50 / 60 Hz 4.0A
額定功率
120V 900 瓦
240V 880 瓦
耗油量
140 毫升/分鐘 (100%輸出)
油桶容量
5公升 (1.32 加侖)
適用雪花水
Antari SL 雪花水、Antari SL-A 高揮發性雪花水、Antari SL-N 新配方雪花水、
Antari SL-AN 高揮發性雪花水、Antari SL-H 高發泡雪花水、Antari SL-C 抗凍
雪花水、Antari SL-UV UV 雪花水
適用環境溫度
5°C – 40°C (41°F – 104°F)
控制方式
手動控制、定時控制、DMX512、無
線控制(標配) 、有線控制(選配)
手動控制、定時控制、DMX512、無
線控制(選配)、有線控制(選配)
連接座
XLR 5-Pin (DMX)、XLR 4-Pin (控制器)、IEC 連接座(主電源)
DMX 512 通道
1個頻道
隨附配件
W-1 無線發射器、吊架
吊架
選購配件
SC-2 有線控制器、
SW-300-FB 地板架
WTR-10 無線遙控器組、SC-2 有線控
制器、SW-300-FB 地板架
尺寸
長 539 寬 276 高 310 公釐 (長 21.22 寬 10.87 高 12.20 英寸)
重量
11.5 公斤 (25.35 磅)
15. 保固聲明
本公司保證我們的商品在一年內沒有材料和製作缺陷。我們在本保證下的義務和責任僅限於在原廠或當地
授權經銷商進行的維修或更換。我們對不當使用或用於非專門設計目的以外之用途不承擔任何責任。本保
固不適用於以任何方式在原廠或當地授權經銷商外修理、改動或組裝的任何商品，以便我們判斷影響其性
能，沒有受到誤用、疏忽或事故的影響，也沒有違反我們的任何商品操作印刷說明。本公司對於從我們這
邊購買的商品不會允許也不對於使用、銷售或修理任何產品有關的任何類型的任何損失或損害承擔責任。
17
16. 機器尺寸圖
18
Appendix I – Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120V circuit, and has a grounding plug that looks like the plug illustrated in
sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal
screw.
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
ページを読み込んでいます...
/