- 2 -
2. Click the button to start the installation.
3. Click the
button to install the driver into the
default folder.
4. Click the
button to continue the installation.
5. Select the “NO, I will restart my computer later” and
then click the
button.
………………………………………………
I/O Base Address/Interrupt Setting
¾ The base address is set from SW1 DIP switch on board:
3
The Windows driver only supports Windows 98/NT/2000
and XP/2003/vista 32-bit versions.
SW1
ON
■
■ ■ ■
■ ■
1 2 3 4 5 6
A8 A7 A6 A5 A4 X
SW1 Value Table
1 2 3 4 5
I/O Address
A8 A7 A6 A5 A4
200-20F ON ON ON ON ON
210-21F ON ON ON ON Off
… 。. 。 。 。 。
2C0-2CF(*) ON Off Off ON ON
2D0-2DF ON. Off Off ON Off
… 。. 。 。 。 。
3F0-3FF Off Off Off Off Off
(*):Default setting
-628A-626
SW1
ON
■
■
■ ■
1234
A8 A7 A6 A5
SW1 Value Table
1 2 3 4
I/O Address
A8 A7 A6 A5
200-21F ON ON ON ON
220-23F ON ON ON Off
… 。. 。 。 。
2C0-2DF(*) ON Off Off ON
2E0-2FF ON Off Off Off
… 。. 。 。 。
3E0-3FF Off Off Off Off
(*):Default setting