P9
Through Bluetooth, connect the P9 speaker
with your Bluetooth device, such as an iPad,
iPhone, Android phone, or laptop.
You can also connect the speaker to an audio
device through an MP3 link cable (not supplied).
On your Bluetooth device, activate Bluetooth and
search for P9.
For the first-time connection, select P9 to start
pairing.
If necessary, enter the passcode.
After successful connection, start music play on the Bluetooth device.
The music streaming may be interrupted by obstacles between the device and P9, such as walls, or other
devices nearby that operate in the same frequency.
If P9 is connected through Bluetooth and an MP3 link cable at the same time, music should play
through Bluetooth.
Press and hold to switch on or
off.
Pairing with a device for the first time:
White and blue light flashes alternately.
Connecting with a paired device:
White light flashes.
To clear the paired devices from your
speaker, press and hold and until the
amber light is on .
The amber light is on after the paired devices are
cleared. Then, the white and blue light flashes alternately.
You enter the pairing mode.
Connected: White light is always on and a Beep
sounds.
Next time you switch on P9, the speaker connects to
the last paired device automatically.
AUX IN
5 sec
3 sec
Switch on & Connect
Reset
Play
AUX IN
All registered and unregistered trademarks
are property of their respective owners.
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
P9
_UM_98_JA_V1.0_WK1251.2
Go to www.philips.com/support for support
information.
EN
www.philips.com/support
www.philips.com/support
Power LEDs
Connection status LED
USB port
EN
EN
EN
EN
www.philips.com/welcome
Always there to help you
Register your product and get support at
EN User Manual
If you are unable to complete the connection, remove the
paired P9 from your device and then, reconnect.
When you close the protective cover, the music play is muted. To unmute, open the cover within five seconds.
When the protective cover is closed for more than five seconds, the speaker is switched off.
Charging ongoing: The four power LEDs light up white alternately. Charging complete: All four power LEDs light up white.
To check the battery level, touch the speaker. The power LEDs light up. The red light flashes when the battery is low.
When music plays from the speaker through an MP3 link cable, increase the volume on the audio player if necessary.
5 sec
Charge Check battery level
Play
AUX IN
100%
75%
50%
25%
10%
Specifications
Amplifier
Rated output power: 2 X 10 RMS (THD= 1%)
Signal to noise ratio: > 65 dB
AUDIO-IN: 0.6 V RMS 22 kOhm
Bluetooth
Standard: Bluetooth Standard Version 2.1 + EDR
Frequency band: 2.402 ~ 2.480 GHz ISM Band
Range: 10 m (free space)
General information
AC power
Philips OH-1028E1502000U
Input: 100-240 V~ 50/60 Hz, 800 mA MAX
Output: 15 V DC, 2 A
Built-in battery
Model no : ICR18650X3
Cell Model: ICR18650
Rating: 2200 mAh, 11.1V
Operation Power Consumption: <30 W
Charging
maximum 1000 mA for USB, 600 mA for power adapter
(power off)
Dimensions
Main Unit (W x H x D): 287 x 125 x 55 mm
Weight
Main Unit: 1.3 kg
アンプ
定格出力：2 X 10 RMS (THD= 1%)
SNR： > 65dB
オ ディオ入力：0.6 V RMS 22 kOhm
Bluetooth
格：Bluetooth 2.1 + EDR
周波数： 2.402～2.480 GHz ISM バンド
有：10 m（自由空）
AC 源
Philips OH-1028E1502000U
入力：100-240 V～50/60 Hz、800 mA MAX
出力：15 V DC、2 A
内バッテリ
モデル番号：ICR18650X3
池モデル：ICR18650
定格：2200 mAh、11.1V
操作消力<30 W
充
最大 1000 mA（USB）、600 mA（源アダプタ）（源
オフ）
サイズ
本体（幅 x 高さ x 奥行き）：287 x 125 x 55 mm
重量
本体：1.3 kg
EN
EN
EN
CN
/
