P9
Through Bluetooth, connect the P9 speaker
with your Bluetooth device, such as an iPad,
iPhone, Android phone, or laptop.
You can also connect the speaker to an audio
device through an MP3 link cable (not supplied).
On your Bluetooth device, activate Bluetooth and
search for P9.
For the first-time connection, select P9 to start
pairing.
If necessary, enter the passcode.
After successful connection, start music play on the Bluetooth device.
The music streaming may be interrupted by obstacles between the device and P9, such as walls, or other
devices nearby that operate in the same frequency.
If P9 is connected through Bluetooth and an MP3 link cable at the same time, music should play
through Bluetooth.
Press and hold to switch on or
off.
Pairing with a device for the first time:
White and blue light flashes alternately.
Connecting with a paired device:
White light flashes.
To clear the paired devices from your
speaker, press and hold and until the
amber light is on .
The amber light is on after the paired devices are
cleared. Then, the white and blue light flashes alternately.
You enter the pairing mode.
Connected: White light is always on and a Beep
sounds.
Next time you switch on P9, the speaker connects to
the last paired device automatically.
AUX IN
5 sec
3 sec
Switch on & Connect
Reset
Play
AUX IN
All registered and unregistered trademarks
are property of their respective owners.
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
P9
_UM_98_JA_V1.0_WK1251.2
Go to www.philips.com/support for support
information.
EN
www.philips.com/support
www.philips.com/support
Power LEDs
Connection status LED
USB port
EN
EN
EN
EN
www.philips.com/welcome
Always there to help you
Register your product and get support at
EN User Manual
If you are unable to complete the connection, remove the
paired P9 from your device and then, reconnect.