Samsung HW-J6001 クイックスタートガイド

Curved Soundbar

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

User manual

HW-J6001

2

GETTING STARTED

FEATURES

GETTING STARTED

Samsung Remote App

Control your Soundbar in the palm of your hand with the

Samsung Audio Remote App*. This convenient app is a

control hub for basic controls like power, volume, and

media controls, as well as custom settings like equaliser

setting.

Surround Sound Expansion

The Surround Sound Expansion feature adds depth and

spaciousness to your listening experience.

TV SoundConnect

Connect your TV and Soundbar easily through Bluetooth

with TV SoundConnect. The absence of trailing wires

between the Soundbar and TV allows you to showcase

the slim and sleek design of both systems, while

maintaining a clean look in your living environment. Easily

control the Soundbar and TV from a single TV remote.

HDMI

HDMI transmits video and audio signals simultaneously,

and provides a clearer picture.

The unit is also equipped with the ARC function which

lets you listen to sound from your TV through the

Soundbar via an HDMI cable. This function is only

available if you connect the unit to an ARC compliant TV.

USB Host Support

You can connect and play music files from external USB

storage devices such as MP3 players, USB flash

memory, etc. using the Soundbar's USB HOST function.

Bluetooth Function

You can connect a Bluetooth device to the Soundbar

and enjoy music with high quality stereo sound, all

without wires!

LICENCES

Manufactured under licence from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under licence from DTS Licensing Limited.

DTS, the Symbol, & DTS and the Symbol together are

registered trademarks, and DTS 2.0 Channel is a

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing LLC in the

United States and other countries.

3

ENG

GETTING STARTED

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage”

inside the product that presents a risk of electric

shock or personal injury.

This symbol indicates important instructions

accompanying the product.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on the

apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power

plug must be easily and readily accessible at all times.

4

GETTING STARTED

PRECAUTIONS

99.1mm 99.1mm

68.6

mm

99.1mm

Ensure that the AC power supply in your house complies with the power requirements listed on the identification

sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough

space around it for ventilation (7~10 cm). Make sure the ventilation slots are not covered. Do not place the unit on

amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the

unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of

time.

During thunderstorms, disconnect the AC plug from the

wall outlet. Voltage peaks due to lightning could damage

the unit.

Protect the product from moisture (i.e. vases), and

excess heat (e.g. a fireplace) or equipment creating

strong magnetic or electric fields. Disconnect the power

cable from the AC supply if the unit malfunctions. Your

product is not intended for industrial use. It is for

personal use only. Condensation may occur if your

product has been stored in cold temperatures. If

transporting the unit during the winter, wait approximately

2 hours until the unit has reached room temperature

before using.

Do not expose the unit to direct sunlight or other heat

sources. This could lead to overheating and cause the

unit to malfunction.

The batteries used with this product contain chemicals

that are harmful to the environment. Do not dispose of

batteries in the general household trash. Do not dispose

of batteries in a fire. Do not short circuit, disassemble, or

overheat the batteries. There is a danger of explosion if

the battery is incorrectly replaced. Replace only with the

same or equivalent type.

D

uri

ng

thu

nde

rstorms

dis

connect t

he

AC

plu

g

D

o not expose

th

eu

nit

to

di

rect s

unl

igh

toro

th

WARNING, DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD, The remote control supplied with

this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from

children. If the battery compartment does not close securely, stop using the product and keep it away

from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

5

ENG

GETTING STARTED

Figures and illustrations in this User Manual are

provided for reference only and may differ from

actual product appearance.

CONTENTS

2 GETTING STARTED

2 Features

3 Safety Information

6 What’s Included

7 DESCRIPTIONS

7 Top / Front Panel

8 Rear / Bottom Panel

9 Remote Control

11 INSTALLATION

11 Installing the Soundbar

11 Installing the Wall Mount

14 Attaching the Soundbar to your TV's Stand

14 Installing Soundbar to Free-Standing

15 CONNECTIONS

15 Connecting the Subwoofer

17 Connecting to a TV

17 Connections with TV Using HDMI (Digital)

Cable

17 Connections with TV Using Optical (Digital)

Cable

18 TV SoundConnect

20 Connections with External Device

20 HDMI Cable

20 Optical or AUX Cable

21 USB

23 FUNCTIONS

23 Input Mode

24 Bluetooth

27 Software Update

28 TROUBLESHOOTING

28 Troubleshooting

29 APPENDIX

29 Specifications

6

GETTING STARTED

WHAT’S INCLUDED

BEFORE READING THE USER’S MANUAL

Note the following terms before reading the user manual.

+ Icons used in this manual

Icon Term Definition

Caution

Indicates a situation where a function does not operate or settings may be cancelled.

Note

Indicates tips or instructions on the page that help you operate a function.

Check for the supplied accessories shown below.

Remote Control /

Lithium Battery

(3V : CR2032)

Power Cord : 2EA DC Adapter HDMI Cable

USB Cable

User Manual Holder-Fix Mount : 2EA Bracket-Wall : 2EA

[ZW

Wall Mount Guide

● The appearance of the accessories may differ slightly from the illustrations above.

● Use the dedicated USB cable to connect external USB devices to the unit.

7

ENG

DESCRIPTIONS

TOP / FRONT PANEL

(Power) Button

Turns the power on and off.

VOL. - / +

Controls the volume level.

The numeric value of the volume level

appears in the front panel display.

Display

Displays the current mode.

(Source) Button

Selects the D.IN, AUX, HDMI, BT, TV, or

USB input.

● While the unit is powered on, pressing

the

(Source) button for more than

3 seconds sets the button to act as

the

( Mute) button. To cancel the

( Mute) button setup, press the

(Source) button for more than 3

seconds again.

● When you plug in the AC cord, the power key will work in 4 to 6 seconds.

● When you turn on this unit, there will be a 4 to 5 second delay before it produces sound.

● If you want to enjoy the sound only from the Soundbar, you must turn off the TV's speakers in the Audio

Setup menu of your TV. Refer to the owner's manual supplied with your TV.

DESCRIPTIONS

8

DESCRIPTIONS

REAR / BOTTOM PANEL

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

DC14V

5V 0.5A

DC 14V

(Power Supply In)

Connect the DC power adaptor to the

power supply jack, and then connect the

AC power adaptor plug to a wall outlet.

(USB Port)

Connect USB devices here to play

files on the devices.

OPTICAL IN (D.IN)

Connect to the digital

(optical) output of an

external device.

HDMI OUT (TV-ARC)

Outputs digital video and

audio signals simultaneously

using an HDMI cable.

HDMI IN

Inputs digital video and audio

signals simultaneously using an

HDMI cable. Use when connecting

a supported external device.

AUX IN

Connect to the Analogue output of an

external device.

LABEL

● When disconnecting the power cable of the AC power adaptor from a wall outlet, pull the plug.

Do not pull the cable.

● Do not connect this unit or other components to an AC outlet until all connections between components

are complete.

9

ENG

DESCRIPTIONS

REMOTE CONTROL

AUTO POWER

Press the

AUTO POWER

button to turn the Anynet+ function on or off.

(Default : Auto Power Link OFF, ON - ANYNET+ / OFF - POWER LINK or OFF

- ANYNET+ / ON - POWER LINK). The Anynet+ function lets you control the

Soundbar with the remote from an Anynet+ compatible Samsung TV. The

Soundbar must be connected to the TV via an HDMI cable.

* Auto Power Link

Synchronizes the Soundbar to a connected Optical source via the Optical

jack so it turns on automatically when you turn on your TV.

(See page 18)

Repeat

Press to set the Repeat function during music playback from a USB device.

OFF - REPEAT : Cancells Repeat Playback.

TRACK - REPEAT : Repeatedly play a track.

ALL - REPEAT : Repeatedly play all tracks.

RANDOM - REPEAT : Plays tracks in random order.

(A track that has already been played may be played again.)

Mute

You can turn the volume down to 0 with the push of a button.

Press again to restore the sound to the previous volume level.

SOURCE

Press to select a source connected to the Soundbar.

Skip Forward

If there is more than one file on the device you are playing, and you press

the $ button, the next file is selected.

SOUND CONTROL

Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the

#

,

$

buttons to adjust the Treble, Bass volume from -6 to +6.

Press and hold the SOUND CONTROL button for about 5 seconds to adjust

the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2KHz, 2.5KHz,

5KHz, 10KHz and SW are selectable and each can be adjusted to a setting

between -6 and +6.

If the Soundbar is connected to a digital TV and the video appears out of sync

with the audio, press the SOUND CONTROL button to sync the audio with the

video. Use the

#

,

$

buttons to set the audio delay between

0 ms and 300 ms. In USB mode, TV mode, and BT mode, the Audio Sync

function may not available.

● Soundbar is a Samsung proprietary name.

● Operate the TV using the TV's remote control.

10

DESCRIPTIONS

Bluetooth POWER

Press the Bluetooth POWER button on the remote to turn the Bluetooth

POWER On function on and off.

See pages 19 and 25 for details.

WOOFER

Press the WOOFER button. Then, use the

#

,

$

buttons to adjust the

Subwoofer volume from -12, -6 to +6.

SOUND

Surr.Sound adds depth and spaciousness to the sound. Pressing the

SOUND button repeatedly cycles through the Surr.Sound settings :

ON - SURROUND SOUND, OFF - SURROUND SOUND

Volume

Adjusts the volume level of the unit.

Power

Turns the Soundbar on and off.

SOUND EFFECT

You can select from 6 different sound modes - STANDARD (Original

Sound), MUSIC, VOICE, SPORTS, CINEMA, and NIGHT MODE

- depending on the content you want to listen to.

Select the STANDARD mode if you want to enjoy the original sound.

Play / Pause

Press the

&

button to pause a file temporarily.

Press the

&

button again to play the selected file.

Skip Back

If there is more than one file on the device you are playing, and you press

the

#

button, the previous file is selected.

INSTALLING THE BATTERY IN THE REMOTE CONTROL

1. Use a suitable coin to turn the

remote control's battery cover

counterclockwise to remove it

as shown in the figure above.

2. Insert a 3V lithium battery. Keep the

positive (+) pole facing up when inserting

the battery. Put the battery cover on and

align the '

●' marks side by side as shown

in the figure above.

3. Use a suitable coin to

turn the remote control

battery cover clockwise

as far as it will go to fix it

in place.

11

ENG

INSTALLATION

INSTALLING THE SOUNDBAR

INSTALLING THE WALL MOUNT

+ Installation Precautions

● Install on a vertical wall only.

● For the installation, avoid a location with high temperature or humidity, or a wall that cannot sustain the weight of

the set.

● Check the strength of the wall. If the wall is not strong enough to support the unit, reinforce the wall or install the

unit on a different wall that can support the unit's weight.

● Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board,

wood, etc.). If possible, fix the support screws into wall studs.

● Purchase wall mounting screws according to the type and thickness of the wall you will mount the Soundbar on.

- Diameter : M5

- Length: L 35 mm or longer recommended.

● Connect cables from the unit to external devices before you install it on the wall.

● Make sure the unit is turned off and unplugged before you install it. Otherwise, it may cause an electric shock.

5 cm or more

1. Place the installation guide against the wall surface.

• The installation guide must be level.

• If the TV is mounted on the wall, install the Soundbar at least 5 cm below the TV.

INSTALLATION

12

INSTALLATION

Center Line

2. Mark the location where the screws will go through on the wall, and then remove the installation guide. Next, drill

holes for the screws using an appropriately sized drill bit.

3. Fasten the Bracket-Wall (2EA) and screws to the marked locations.

4. Lift up the product after inserting the Bracket-Wall as shown.

13

ENG

INSTALLATION

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

5. Insert and fasten Holder-Fix Mount into each hole on the product’s bottom side. The product is fixed to the

Bracket-Wall.

● Do not hang onto the installed unit and avoid striking or dropping the unit.

● Secure the unit firmly to the wall so that it does not fall off. If the unit falls off, it may cause an injury or

damage the product.

● When the unit is installed on a wall, please make sure that children do not pull any of the connecting

cables, as it may cause it to fall.

● For the optimal performance of a wall mount installation, install the speaker system at least 5 cm below the

TV, if the TV is mounted on the wall.

● For your safety, if you do not mount the unit on the wall, install it on a secure, flat surface where it is unlikely

to fall.

14

INSTALLATION

ATTACHING THE SOUNDBAR TO YOUR TV'S STAND

You can attach the Soundbar to your TV's stand if you have a Samsung TV that has a stand that is compatible with this

Soundbar.

● This Soundbar is compatible with model JU6700, JU6500 and JU7500, 48 inch, 55 inch and 65 inch,

JU6610 - 48 inch and 55 inch, 2015 Samsung curved TVs. Please visit the home page of Samsung

Electronics (www.Samsung.com) to see a detailed list of the compatible models.

● This Soundbar cannot be installed to a non-compatible TV, in either form of TV mount or TV stand.

1. Align the Soundbar’s centre with the centre of the base of the TV, and then carefully push it onto the stand as far

as it will go, as shown in the illustration. Be careful not to unbalance the TV.

INSTALLING SOUNDBAR TO FREE-STANDING

1. Centre the Soundbar on the flat area in front of the TV.

● Install it on a level and firm surface.

15

ENG

CONNECTIONS

● Do not connect the power cord of this product or your TV to a wall outlet until all connections between

components are complete.

● Before moving or installing this product, be sure to turn off the power and disconnect the power cord.

CONNECTING THE SUBWOOFER

CONNECTING TO THE SUBWOOFER AUTOMATICALLY

The main unit and subwoofer should link (connect wirelessly) automatically when the main unit and subwoofer are

turned on.

• If it is completely connected, the blue LED in the subwoofer stops blinking.

CONNECTING TO THE SUBWOOFER MANUALLY

The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect wirelessly)

automatically when the main unit and subwoofer are turned on. If the Link indicator does not light when the main unit

and subwoofer are turned on, please set the ID by following the procedure below.

POWER

1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.

• The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.

3. While the main unit is powered off (in STANDBY mode), press and hold the

(Mute) on the remote control for 5

seconds.

4. The ID SET message appears on the Soundbar's display.

5. To finalise the link, turn the main unit’s power on while the subwoofer’s Blue LED blinks.

• The main unit and the subwoofer should now be linked (connected).

• The Link indicator (Blue LED) on the subwoofer should be on.

• If the Link indicator is not solid blue, the linking process has failed. Turn off the main unit and start again from

Step 2.

• You can enjoy better sound from the wireless subwoofer by selecting a Sound Effect.

(See page 10)

CONNECTIONS

16

CONNECTIONS

● Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

● If the main unit is powered off, the wireless subwoofer will be in standby mode and the STANDBY LED on

the upper side will come on after the Link indicator (Blue LED) blinks for 30 seconds.

● If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar,

interference may cause some sound interruption.

● The transmission distance of the wireless signal between the main unit and subwoofer is about 10 meters,

but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the

main unit and the wireless subwoofer, the system may not operate at all, because the wireless signal

cannot penetrate metal.

● If the main unit doesn't make a wireless connection, follow steps 1-5 on the previous page to re-set the

connection between the main unit and wireless subwoofer.

● The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and

moisture.

● For optimal listening performance, make sure that the area around the wireless subwoofer location is clear

of any obstructions.

17

ENG

CONNECTIONS

CONNECTING TO A TV

CONNECTIONS WITH TV USING HDMI (DIGITAL) CABLE

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

HDMI IN

HDMI OUT

(TV-ARC)

HDMI OUT

(TV-ARC)

HDMI Cable

1. Connect an HDMI cable from the HDMI OUT (TV-ARC) jack on the back of the product to the HDMI IN jack on

your TV.

2. Press the

(Source) button on the top panel of Soundbar or the SOURCE button on remote control to select

the D.IN mode.

● HDMI is an interface that enables the digital transmission of video and audio data with just a single

connector.

● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.

● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose

diameter is less than 14 mm.

● Anynet+ must be turned on.

● This function is not available if the HDMI cable does not support ARC.

CONNECTIONS WITH TV USING OPTICAL (DIGITAL) CABLE

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

OPTICAL IN

OPTICAL OUT

Optical Cable

(not supplied)

1. Connect OPTICAL IN (Audio) on the Soundbar to the OPTICAL OUT jack of the TV.

2. Press the (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select

the D.IN mode.

18

CONNECTIONS

+ Auto Power Link

If you have connected the main unit to a TV with a digital optical cable, set the Auto Power function ON to have

the Soundbar turn on automatically when you turn the TV on.

AUTO POWER LINK Display

ON

OFF - ANYNET+ / ON - POWER LINK

OFF

ON - ANYNET+ / OFF - POWER LINK

1. Connect the Soundbar and

a TV

with an Optical cable (not supplied).

2. Press the

(Source) button on the main unit’s top panel or the SOURCE button on the remote control to

select the

D.IN

mode.

3. Press the AUTO POWER button on the remote control to toggle the Auto Power Link function on and off.

● Depending on the connected device, Auto Power Link may not function.

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV

SoundConnect function.

Connect

1. Turn on the TV and Soundbar.

• Turn on the menu of the TV.

• Move to Speaker Settings on "Sound" tab.

• Set the "Add New Device" menu to "On".

2. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to

select the TV mode.

3. On the TV, a message asking whether to enable the TV SoundConnect function appears.

4. Select <Yes> to finish connecting the TV and Soundbar using the TV's remote control.

19

ENG

CONNECTIONS

● Switching the Soundbar’s mode from TV to another mode automatically terminates TV SoundConnect.

● To connect the Soundbar to another TV, the existing connection must be terminated.

● Terminate the connection to the existing TV, and then press the

&

button on the remote control for 5

seconds to connect to another TV.

● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on.

Check whether your TV supports the TV SoundConnect (SoundShare) function before you begin. (For

further information, refer to the TV’s user manual.).

● If your Samsung TV was released before 2014, check the SoundShare setting menu.

● If the distance between the TV and Soundbar exceeds 10 meters, the connection may not be stable or the

audio may stutter. If this occurs, relocate the TV or Soundbar so that they are within operational range, and

then re-establish the TV SoundConnect connection.

● TV SoundConnect Operational Ranges:

- Recommended pairing range: within 2 meters.

- Recommended operational range: within 10 meters.

● The Play/Pause, Next, and Prev buttons on the Soundbar or Soundbar's remote do not control the TV.

+ Using the Bluetooth POWER On function

The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth

compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on

or off will turn the Soundbar's power on and off as well.

1. Connect the TV to your Soundbar using the TV SoundConnect function.

2. Press the Bluetooth POWER button on the Soundbar remote. ON - BLUETOOTH POWER appears on the

Soundbar's display.

• ON - BLUETOOTH POWER : The Soundbar turns on and off when you turn the TV on or off.

• OFF - BLUETOOTH POWER : The Soundbar only turns off when you turn the TV off.

● This function is supported by some Samsung TVs released from 2013 on.

20

CONNECTIONS

CONNECTIONS WITH EXTERNAL

DEVICE

HDMI CABLE

HDMI is the standard digital interface for connecting to TVs, projectors, DVD players, Blu-ray players, set top boxes,

and more.

HDMI prevents any degradation to the signal due to conversion to analogue and maintains the video and audio

quality of the original digital source.

Digital Devices

DC 14V

AUX IN

OPTICAL IN

HDMI IN

HDMI OUT

(TV-ARC)

5V 0.5A

HDMI OUT HDMI IN

HDMI IN

HDMI Cable

1. Connect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital

device.

2. Press the

(Source) button on the top panel of Soundbar or the SOURCE button on remote control to select

the HDMI mode.

OPTICAL OR AUX CABLE

This unit comes equipped with one optical in digital jack and one audio analogue in jack, giving you two ways to

connect it to an External Devices.

AUX IN

AUX OUT

OPTICAL IN

OPTICAL OUT

BD / DVD player /

Set-top box /

Game console

Optical Cable

(not supplied)

Audio Cable

(not supplied)

ページが読み込まれています...

Samsung HW-J6001 クイックスタートガイド

Samsung HW-J6001 クイックスタートガイド

他の言語で

関連論文

その他のドキュメント