2
1
4
3
5
6
5
4-289-308-02(1)
Battery Charger
Chargeur de Batterie
Operating Instructions
Mode d’emploi
BC-VM10
© 2011 Sony Corporation
Printed in China
M
ˎ
M
ˎ
InfoLITHIUM
ˎ
ˎ
M
ˎ
1
2
3
4 CHARGE
5
6
1
2
CHARGE
CHARGE
1
NP-FM500H NP-FM50 NP-QM71D NP-QM91D
175 130 280 465
25
ˎ
ˎ
CHARGE
ˎ
CHARGE
ˎ
1
ˎ
ˎ
100V-240V
1
CHARGE 2
1.5
0.15
CHARGE
CHARGE
CHARGE
10 30
CHARGE
1 CHARGE
1
AC100 V 240 V 50 Hz/60 Hz 14 VA 20 VA
9 W
DC8.4 V 750 mA
0 40
20 +60
70 25 95
90 g
BC-VM10A 1
ˎ
ˎ
1
ˎ
BC-VM10
ˎ
ˎ
ˎ
ank you for purchasing the Sony Battery charger.
Before operating this Battery charger, please read this manual thoroughly
and retain it for future reference.
e BC-VM10 battery charger can only be used to charge an ˎ
“InfoLITHIUM” battery pack (M series).
“InfoLITHIUM” battery packs (M series) have the ˎ mark.
is unit cannot be used to charge a nickel cadmium type or nickel ˎ
metal hydride type battery pack.
“InfoLITHIUM” is a trademark of Sony Corporation. ˎ
Identifying the parts
1 Battery mark
2 Battery pack
3 Charger mark
4 CHARGE lamp
5 Power plug
6 to wall outlet (wall socket)
Owner’s Record
e model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. BC-VM10 Serial No.
To Charge the Battery Pack
1 Attach the battery pack.
Keeping the battery mark in the same direction as the charger
mark , insert the battery pack until it clicks into place.
(See illustration ).
2 Pull the power plug up, and then connect it to a wall outlet
(wall socket).
Always connect the power plug with the prongs at the top
(See illustration ).
Do not connect the power plug with the prongs at the bottom
(See illustration ).
e CHARGE lamp (orange) lights up and charging begins.
When the CHARGE lamp goes out, normal charging is completed
(Normal charge).
For a full charge, which allows you to use the battery pack longer
than usual, leave the battery pack in place for approximately another
one hour (Full charge).
To remove the battery pack
Remove the battery pack by sliding it in the opposite direction to when
you attached it and liing it straight out.
(Continued on the reverse side.)
ページが読み込まれています...
-
1
-
2
