AF-3/AF-3X/AF-3S
Special Effects Fan
User Manual
- English
-
中文
© 2023 Antari Lighting and Effects Ltd.
2
1. Introduction ................................................................................................................................................... 1
2. Safety Information ........................................................................................................................................ 1
3. Package Contents & Inspection .................................................................................................................... 2
4. Machine Details ............................................................................................................................................ 2
5. Technical Label Information ......................................................................................................................... 3
6. Machine Variation ......................................................................................................................................... 4
7. Setting and Manual Operation ...................................................................................................................... 4
8. Control Settings ............................................................................................................................................ 4
9. DMX Connection .......................................................................................................................................... 4
10. Z-3 Cable Remote (Optional) ....................................................................................................................... 6
11. WTR-10 Wireless Remote (Optional) ........................................................................................................... 6
12. Service and Maintenance .............................................................................................................................. 7
13. Technical Specifications ............................................................................................................................... 8
14. Warranty Disclaimer ..................................................................................................................................... 8
15. Machine Dimension ...................................................................................................................................... 8
1. 前言 ............................................................................................................................................................... 9
2. 安全注意事項 ............................................................................................................................................... 9
3. 包裝內容與檢查 ......................................................................................................................................... 10
4. 機器訊息 ..................................................................................................................................................... 11
5. 技術標籤資訊 ............................................................................................................................................. 12
6. 機型比較 ..................................................................................................................................................... 12
7. 設定與手動操作說明 ................................................................................................................................. 12
8. 控制設定 ..................................................................................................................................................... 13
9. DMX 說明 .................................................................................................................................................. 13
10. Z-3 有線控制器(選配) ............................................................................................................................... 14
11. WTR-10 無線控制器(選配) ....................................................................................................................... 14
12. 維護和保養 ................................................................................................................................................. 15
13. 技術規格 ..................................................................................................................................................... 16
14. 保固聲明 ..................................................................................................................................................... 16
15. 機器尺寸圖 ................................................................................................................................................. 16
Appendix I - Grounding Instruction ................................................................................................................... 17
1
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at
all time. The manual includes how to install and operate the machine under safe condition and explain all the labels
printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER
If the danger is not avoided, it will cause death or serious injury
WA R N I N G
If the warning is not heeded, it can cause death or serious injury.
CAUTION
If the precaution is not taken, it may cause minor or moderate injury.
DANGER
l Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may
cause serious consequences.
l Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of
electrocution. For grounding instruction, please refer to Appendix I on page 17.
l Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
l Do not use the fan in an environment full of flammable gas, susceptible to water or powder. Keep away from
any fire and heat sources.
l When operating the machine, do not point at people, animals, or fire.
WA R N I N G
l Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space
around the machine and make sure there is no flammable gas or material nearby.
l Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock
or result in fire.
l The machine can only be operated by adults or professionals, is not intended for use by person with reduced
physical sensory, mental capabilities, or lack of experience and knowledge including children.
l Do not leave the machine running unattended, make sure all powers are off when leaving.
l Children should be supervised to ensure that they do not play with the machine.
l Do not use the machine upside down or tilt it, it might cause damages or malfunction.
l Never allow any object or part of your body to enter path of the fan blades to prevent any injury or damages
l Do not spray the fan with any liquid including cleaner and insecticide to avoid injury or damages.
CAUTION
l Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or
moisture environment.
l Please make sure the power outlet is not damaged or loose before plug in the power cord.
l If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
l The machine is for indoor use only.
l Do not operate the machine in any area with unstable voltage.
l If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant.
l Do not contact any moving part.
2
l Only use accessories recommended or sold by Antari.
l Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time.
l To disconnect, turn all controls to the off position, then remove plug from outlet.
l Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
l Unplug from outlet before servicing or cleaning.
l Ensure that curtain, clothing, cables or other items cannot be suck into the fan.
l Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
l After a period of operation, abnormal noise and uneven air volume may appear because of dust blocking
airflow. It will disappear after cleaning the air inlet and outlet.
Before operating the machine, please read all warning labels on the machine, description as below:
WA R N I N G !
1. Do not allow any object or part of your body get near the protection grill while operating the fan.
2. Operate fan only with adult supervision.
3. Do not use fan without protection grill.
4. Do not use the fan in damp environment.
3. Package Contents & Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct
model and all parts are included. If any part appears to be damaged or missing during transportation, please contact
your local dealer and return with original package for inspection.
3.1 Package Contents
AF-3 Compact Effects Fan
AF-3X Compact Effects Fan
AF-3S Compact Effects Fan
1 x AF-3 Compact Effects Fan
1 x AF-3X Compact Effects Fan
1 x AF-3S Effects Fan
1 x Neutrik powerCon Cable Connector
1 x User Manual or Scan QR Code on the Machine
3.2 Optional Accessories
Item Code
Description
Z-3
Cable Remote
WTR-10
Wireless Remote (W-1 Transmitter/W-1 Receiver)
4. Machine Details
AF-3
3
01. Adjusting Knob
07. Wirless Connector
02. Neutrik powerCon Cable Connector IN
08. Ring
03. Neutrik powerCon Cable Connector OUT
09. Bracket
04. XLR 5-Pin DMX
10. Air Inlet
05. Cable Remote Connector
11. Air Outlet
06. Rotary Knob
AF-3X
01. Adjust Knob
07. Wirless Connector
02. Fuse
08. Ring
03. Neutrik powerCon Cable Connector
09. Bracket
04. XLR 5-Pin DMX
10. Air Inlet
05. Cable Remote Connector
11. Air Outlet
06. Rotary Knob
AF-3S
01. Adjusting Knob
07. Neutrik powerCon Cable Connector IN
02. Ring
08. Neutrik powerCon Cable Connector OUT
03. Wireless Connector
09. Air Inlet
04. Rotary Knob
10. Air Outlet
05. Cable Remote Connector
11. Bracket
06. XLR 5-Pin DMX
4
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker / Fuse
2. Input Vo l t a g e
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Machine Variation
AF-3
AF-3X
AF-3S
Series Power Supply Available
Series Power Supply Unavailable
Design for CH-1 with Flight Case
7. Setting and Manual Operation
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open
space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Plug the machine to the power outlet. Please read the technical label on the back of the machine and make
sure the power outlet has the correct rated voltage for the machine;
Step 3. Turn on the power, when the status indicator display green indicates the fan is in standby status and ready
for operation;
Step 4. To start, turn the rotary knob to the right to increase fan speed and to the left to decrease the fan speed, to
stop turn the rotary knob to minimum (-), when fan is in operation the indicator light show orange;
Step 5. To turn off the power, please make sure the machine is not operating. If you will not use the machine a
long period of time, please unplug the power cord.
8. Control Settings
AF-3 Series Compact Effects Fan can be operated in the following modes. The machine can only accept 1 type of
signal at a time. When using different control modes at the same time, the machine will work according to built-in
control priority:
l Manual
l DMX512
l Wireless
l Cable Remote
9. DMX Connection
9.1 DMX Connector Pin Assignment
The machine has a XLR 5-Pin for DMX connection. The diagram below indicates pin assignment information.
5
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
** There is a protection cap on DMX IN, please
remove it with your finger before operation.
9.2 DMX Setting
DMX Value
Function
0~5
Fan off
6~254
Speed up linearly
255
Maximum speed
9.3 Addressing
Each device occupies 1 channel. To ensure that the control signals are properly directed to each device, they require
addressing. This is to be adjusted for every single device by changing the DIP-switches as set out in the table
below. The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly and
independently from any other fixture on the DMX data link. If two, three or more devices are addressed similarly,
they will work similarly.
Occupation of the DIP-Switches:
DIP
1
2
3
4
5
6
7
8
9
10
Ch.
1
2
4
8
16
32
64
128
256
Wireless pairing, control on/off
SW.
11
12
ON
2 CH Mode
Wireless Pairing
OFF
1 CH Mode
No Function
6
10. Z-3 Cable Remote (Optional)
Z-3 Cable Remote is an optional accessory for AF-3/AF-3X Special Effects Fan, please see instruction below;
1. Plug the cable remote to the connector on the back of the machine;
2. Press the red button to turn the power of the remote on, red indicator light is solid;
3. You c an s tar t to tur n th e kn o b t o ac t iva te the fan and adjust the fan speed.
** If you encounter any problem, please contact your local Antari dealer for assistant
11. WTR-10 Wireless Remote (Optional)
WTR-10 Wireless Remote is an optional accessory for AF-3/AF-3X Special Effects Fan, it included a W-1 wireless
transmitter and a W-1 wireless receiver. If you already purchased the wireless model, it’s ready to use. If you
purchase the WTR-10 Wireless Remote afterwards, please follow the instruction below. If you encounter any
problem, please contact your local Antari dealer for assistant.
Device Number & Channels
Staring Address
1
2
4
8
16
32
64
128
256
Device 1 – Channel 1
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 2 – Channel 2
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 3 – Channel 3
On
▲
▲
Off
▽
▽
▽
▽
▽
▽
▽
Device 4 – Channel 4
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 5 – Channel 5
On
▲
▲
Off
▽
▽
▽
▽
▽
▽
▽
7
11.1 W-1 Wireless Transmitter & Receiver
l Battery：27A 12V
l Effective Range：The effective range is approximately 50m,
depends on actual condition, it may vary.
l W-1 wireless transmitter has 2 buttons, each function as follow:
W-1 Wireless Transmitter
Button
Function
[A]
Start Fan
[B]
Stop Fan
W-1 Wireless Receiver
11.2 W-1 Wireless Receiver Installation
If you purchased the WTR-10 Wireless Remote afterwards, please follow the instructions below to install the
receiver. If you encounter any problem, please contact your local Antari dealer for assistant.
Graph 1
Graph 2
Graph 3
1. Please see graph 1, remove the cover from the pointed place;
2. You w ill see a w h ite cab l e l i ke g rap h 2, pul l it out and con n ect to t he W-1 receiver;
3. Screw it back to the machine like graph 3 and follow the instruction on 11.3 for pairing.
11.3 Pair & Unpair
Each receiver can pair up to 5 transmitters, please follow the steps below to pair or unpair the remote;
Step 1. Set DIP switch No.10 to “ON” position;
Step 2. Status will show red light for 10 seconds, press “A” or “B” on the transmitter to pair it; status indicator
will show green light if pair is successful;
Step 3. If you want to pair extra transmitter, turn DIP switch No.10 to “OFF” position first and repeat Step 2.;
Step 4. To unpair, set DIP switch No.10 to “OFF” position;
12. Service and Maintenance
DANGER!
Disconnect the power cord before starting maintenance operation!
l Always keep the machine clean.
l Can use an air compressor, a vacuum or a soft brush to remove the dust on the machine.
l Can use a slightly damp cloth to clean the casing.
l It is recommended to run the machine at least once a month in order to maintain its best performance and
output condition.
l Excessive dust will reduce the performance and cause overheat.
8
13. Technical Specifications
AF-3/AF-3X
AF-3S
Rated Voltage
US Model : AC 100-120V, 50/60Hz 1.5A
EU Model : AC 220-240V, 50/60Hz 1.0A
Rated Power
127W
Ambient Temp. R a nge
0°C - 40°C (32°F - 104°F)
Air Flow
530 CFM (50Hz)、600 CFM (60Hz)
Fan Speed
750 - 2550 rpm (50Hz)、750 - 2800 rpm (60Hz)
Noise Level
72.6 dB (Max. Output)
Control Methods
Manual、DMX512、Wireless (Optional)、Cable Remote (Optional)
Interface
XLR 5-Pin (DMX)、Neutrik powerCon (Power)
DMX Channel
1 Channel
Included Accessories
N/A
Optional Accessories
Z-3 Cable Remote、WTR-10 Wireless Remote
Dimension
L 124 W 316 H 368 mm
(L 4.88 W 12.44 H 14.49 inch)
L 160 W 312 H 336 mm
(L 6.29 W 12.28 H 13.24 inch)
Weight
6.0 kg (13.23 lbs.)
6.4 kg (14.00 lbs.)
14. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
15. Machine Dimension
AF-3/AF-3X
AF-3S
9
中文使用說明書
1.
前言
在操作本機器之前，請務必仔細詳閱本說明書然後請將本說明書放置在機器使用者可隨時查閱之處存放。
此說明書包含如何安全的安裝及操作本機器以及說明所有在機器上的標示。如果您有任何操作上的問題，
請立即聯繫當地的 Antari 經銷商尋求協助。
2.
安全注意事項
危險
若不確實避免這些指示，可能導致嚴重人身傷害甚至死亡。
警告
若不確實遵循這些指示，可能導致嚴重人身傷害甚至死亡。
注意
若不確實注意這些指示，可能導致人身傷害甚至死亡，嚴重程度視情況而定。
危險
l 請務必使用正確電壓。如果使用錯誤電壓，可能會遭受危險的電擊燒傷或更嚴重的後果。
l 請務必將機器連結到有保護的電路，並確保有正確地接地，以避免觸電的危險。關於接地方式請參考
第17 頁附錄 I。
l 請勿在捆綁電源線的情況下使用，可能會發熱導致火災。
l 禁止在有易燃氣體、易被水淋、粉塵較多的地方使用風扇。請遠離火源及熱源。
l 操作機器時請 勿 將 機 器 對 著 人 體 、動物或火 焰使用。
警告
l 請於堅固、平坦、穩定且通風良好的表面上使用機器。請勿遮蓋機器散熱部份，機器周邊至少應保留
公分的空間並確認附近沒有易燃性物質或可揮發性氣體。
l 請勿隨意拆卸、修理或改造機器，這可能會導致機器故障、損壞、觸電危險或造成火災。
l 本機器僅限有行為能力之成人或專業人員操作，不預期提供生理、感知、心智能力、經驗或知識不足
者之使用者(包含孩童)使用本機器。
l 請勿在無人看管時讓機器運作，並 於 外 出 離 去 時 確 實關閉 電 源 。
l 孩童應受監督，以確保孩童不能操作或嬉戲玩本機器。
l 請勿將機器倒放或傾斜使用，可能導致機器動作不正常或損壞。
l 禁止將其他物體或身體部位插入前後網內，避免受傷或損壞。
l 請勿將任何液體包含清潔劑與殺蟲劑等，噴向風扇避免受傷或損壞。
注意
l 本機器無防水設計，請隨時保持機器乾燥、嚴禁將其潑水、浸水、淋雨或放在潮溼的環境。
l 在插 入 電 源 插 座前 ，請確認電 源 插 座無損壞或鬆動。
l 若電源線損壞，必須使用原廠電源線或組件進行更換，否則將導致保固無效。
l 本產品僅限室內使用。
10
l 請勿在電壓不穩定的地區使用本機器。
l 如果機器出現異常聲音或有任何不正常現象時，請立即停止工作，將電源關閉及拔下機器電源線，並
請聯繫當地的 Antari 經銷商尋求協助。
l 請勿觸碰機器內部運轉零件。
l 只能使用原廠建議或販售之配件。
l 請確認機器不在使用的狀態下電源已關。如果長時間不使用機器，請拔掉電源線。
l 關閉機器時，將所以控制開關轉到關閉的位置，然後再將插頭從插座拔除。
l 拔除電源線時，請抓住插頭不是電線。
l 應遠離窗簾、衣物、電線或其他異物，避免被風扇葉片捲入。
l 在保養及清潔前，請把電源線從插座拔除。
l 在電線或插座有損毀、機器故障或有掉落或損壞的情形發生時，請勿操作機器。請將機器送回最近的
維修站，做檢查、維修及電源或機械的調整。
l 使用一段時間後，因為灰塵阻擋空氣流動，有可能會產生異音或不均勻風量。在清潔過後就會恢復正
常。
在使用本機之前，請詳細閱讀機器上的警語標示，說明如下：
WA R N I N G ! 警告!
1. Do not allow any object or part of your body get near the protection grill while operating the fan. 使用風
扇時，禁止將其他物體或身體部位靠近保護網內
2. Operate fan only with adult supervision. 僅在成人監督下使用風扇
3. Do not use fan without protection grill. 請勿在無保護網時使用風扇
4. Do not use the fan in damp environment. 請勿在潮濕還就使用風扇
3.
包裝內容與檢查
在收到機器後，請立即小心地打開包裝紙箱，檢查所有內容，確認您所購買的機型及配件。如果有任何部
件因運輸過程出現損壞或缺少，請立即連絡經銷商，並以原包裝退回檢查。
3.1
包裝內容
AF-3
特效風扇
AF-3X
特效風扇
AF-3S
特效風扇
1 x AF-3 特效風扇
1 x AF-3X 特效風扇
1 x AF-3S 特效風扇
1 x Neutrik powerCon 電源線
1 x 說明書或掃描機身 QR Code
3.2
選配說明
品項
描述
Z-3
有線控制器
WTR-10
無線控制器(W-1 無線發射器/W-1 無線接收器)
11
4.
機器訊息
AF-3
01. 調整旋鈕
07. 無線控制器接頭
02. Neutrik powerCon 電源線連接頭OUT
08. 吊環
03. Neutrik powerCon 電源線連接頭IN
09. 支架
04. XLR 5-PIN DMX 連接頭
10. 入風口
05. 有線控制器接頭
11. 出風口
06. 控制旋鈕
AF-3X
01. 調整旋鈕
07. 無線控制器接頭
02. 保險絲
08. 吊環
03. Neutrik powerCon 電源線連接頭
09. 支架
04. XLR 5-PIN DMX 連接頭
10. 入風口
05. 有線控制器連接頭
11. 出風口
06. 控制旋鈕
12
AF-3/AF-3S
01. 調整旋鈕
07. Neutrik powerCon 電源線連接頭IN
02. 吊環
08. Neutrik powerCon 電源線連接頭OUT
03. 無線控制器連接頭
09. 入風口
04. 控制旋鈕
10. 出風口
05. 有線控制器連接頭
11. 底座
06. XLR 5-PIN DMX 連接頭
5.
技術標籤資訊
使用本機器前，請詳閱位於機器後方的技術標籤訊息。
1. 機器型號
5. 保險絲規格
2. 工作電壓
6. 說明書 QR CODE
3. 頻率
7. 機器流水序號
4. 瓦特數
6.
機型比較
AF-3
AF-3X
AF-3S
電源可串聯
電源不可串聯
只能CH-1 機器使用
7.
設定與手動操作說明
步驟
1. 將機器平放在堅固、平坦、穩定且通風良好的表面上，機器周圍至少應保留 50 公分的空間並確
認附近沒有易燃性物質或可揮發性氣體;
步驟
2. 將機器連接電源插座，連接之前，確認機器背後技術標籤上所標示要求功率，是否與電源插座
相符;
步驟
3. 啟動機器電源後，狀態燈號顯示綠燈，代表機器在待機模式並可以進行操作。
步驟
4. 欲開始，將控制旋鈕轉向右邊增加風扇速度轉向右邊降低風扇速度；欲停止，將控制旋鈕轉到
(-)位置; 風扇運作時狀態燈號顯示橘燈;
步驟
5. 需關閉機器時，請確認機器已停止運轉，再將電源關閉即可，長時間不使用時請拔除電源線。
13
8.
控制設定
AF-3/AF-3X 特效風扇可以使用下列操作模式，機器每次接受一種訊號。當同時間使用多種訊號時機器將
根據原廠內建訊號的優先順序來進行工作;
l 手動控制
l DMX512
l 無線控制
l 有線控制
9. DMX
說明
9.1 DMX
說明
本機可提供一個XLR 5-PIN 的DMX 連接頭選擇。下為PIN 的接點說明：
Pin
功能
1
接地
2
數據-
3
數據+
4
N/A
5
N/A
DMX IN 連接頭上的蓋子是一個保護蓋，操作前，
請用手指撥開即可輕鬆地將其取下。
9.2 DMX
通道功能設定
DMX
數值範圍
功能
0~5
風扇關閉
6~254
增加風扇速度
255
最高風速
9.3 DMX
地址說明
每台機器會佔據一個通道。他們都需要一個地址來確保控制訊號是正確指向每台機器。請按照下圖，使用
前，必須針對每一台機器透過指撥開關來調整。起始地址是定義為機器響應控制器的第一個通道。請確保
你沒有任何重複的通道才能夠正確及獨立的透過DMX 數據鏈結來操控每台機器。如果二、三或多台機器
有類似的地址他們將運作相似。
指撥開關控制說明
:
DIP
1
2
3
4
5
6
7
8
9
10
Ch.
1
2
4
8
16
32
64
128
256
Wireless pairing, control on/off
SW.
11
12
ON
2 CH Mode
Wireless Pairing
OFF
1 CH Mode
No Function
14
Setting the DMX-Starting
Address
DIP-Switch No.
1
2
3
4
5
6
7
8
9
Device Number & Channels
Staring Address
1
2
4
8
16
32
64
128
256
Device 1 – Channel 1
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 2 – Channel 2
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 3 – Channel 3
On
▲
▲
Off
▽
▽
▽
▽
▽
▽
▽
Device 4 – Channel 4
On
▲
Off
▽
▽
▽
▽
▽
▽
▽
▽
Device 5 – Channel 5
On
▲
▲
Off
▽
▽
▽
▽
▽
▽
▽
10. Z-3
有線控制器
(
選配
)
Z-3 有線控制器是AF-3/AF-3X 特效風扇的選購配件，使用方法如下;
1. 將有線控制器插入機器後方的接頭;
2. 按下紅色按鈕開啟電源，紅色指示燈亮起靜止不動;
3. 旋轉旋鈕啟動風扇並調整風扇速度。
**如果有任何問題，請聯繫當地的 Antari 經銷商尋求協助。
11. WTR-10
無線控制器
(
選配
)
WTR-10 無線控制器組包含一個W-1 無線發射器及W-1 無線接收器，此為AF-3/AF-3X 特效風扇的選購配
件。若您採購的版本已含無線功能即已安裝至機器上，可直接使用。若是後續採購WTR-10 無線控制器，
請按照下方說明進行安裝與配對。如果遇到任何困難與問題，請與當地的 Antari 經銷商尋求協助。
15
11.1 W-1
無線發射器
&
接收器說明
l 發射器：使用 27A 12V 電池
l 收發距離：有效距離為50 公尺，實際收訊狀況根據現場環境
因素而有所不同。
l W-1 無線發射器配有 2個按鈕，控制功能為：
W-1 無線發射器
按鈕
功能
[A] 鍵
啓動風扇
[B] 鍵
停止風扇
W-1 無線接收器
11.2 W-1
無線接收器安裝說明
如果是後續採購WTR-10 無線控制器，請按照下方說明進行安裝與配對。如果遇到任何困難與問題，請與
當地的 Antari 經銷商尋求協助。
Graph 1
Graph 2
Graph 3
1. 請看圖一，取下蓋子;
2. 請看圖二，取下後，你會看到一條白色的線，請拉出來接在 W-2 接收器上;
3. 請看圖三，將接收器鎖回去原本的地方，然後按照 11.3 的步驟開始配對。
11.3
配對
&
取消配對
每個接收器可以配對最多5個控制器，請參考下面步驟配對和取消配對控制器;
步驟
1
：
將指撥開關10 號撥到”ON”的位置;
步驟
2：狀態燈號會紅燈閃爍 10 秒，此時按下無線遙控器上的”A”或”B”即可配對，配對成功後狀態燈號
將會顯示綠燈;
步驟
3
：
如果要配對多個無線發射器，請將撥指開關10 號撥到”OFF”的位置，然後重複步驟 2即可。
步驟
4
：
欲解除配對，將撥指開關10 號撥到”OFF”的位置。
12.
維護和保養
危險
!
維修保養之前，請務必拔除電源線！
l 隨時保持機器清潔。
l 可以使用空氣壓縮機、吸塵器或軟刷除去機器上的灰塵。
l 機殼可使用濕布擦拭。
16
l 建議每月至少讓機器運轉一次，以保持機器處於最佳的性能和輸出條件。
l 機器上過多的灰塵會降低機器工作性能，導致散熱不良。
13.
技術規格
AF-3/AF-3X
AF-3S
額定電壓
美規 : AC 100-120V, 50/60Hz 1.5A
歐規 : AC 220-240V, 50/60Hz 1.0A
額定功率
127 瓦
適用環境溫度
0°C – 40°C (32°F – 104°F)
風量
530 立方英尺/分 (50 赫茲)、600 立方英尺/分(60 赫茲)
風扇速度
750-2550 轉(50 赫茲)、750-2800 轉(60 赫茲)
噪音值
72.6 分貝(最大輸出)
控制方式
手動控制、DMX512、無線控制(選配)、有線控制(選配)
連接座
XLR 5-PIN(DMX)、Neutrik powerCon(主電源)
DMX512 通道
1個頻道
隨附配件
無
選購配件
Z-3 有線控制器、WTR-10 無線控制器
尺寸
長 124 寬 316 高 368 公釐
(長 4.88 寬12.44 高 14.49 英寸)
長 160 寬 312 高 336 公釐
(長 6.29 寬12.28 高 13.24 英寸)
重量
6.0 公斤 (13.23 磅)
6.4 公斤 (14.00 磅)
14.
保固聲明
本公司保證我們的商品在一年內沒有材料和製作缺陷。我們在本保證下的義務和責任僅限於在原廠或當地
授權經銷商進行的維修或更換。我們對不當使用或用於非專門設計目的以外之用途不承擔任何責任。本保
固不適用於以任何方式在原廠或當地授權經銷商外修理、改動或組裝的任何商品，以便我們判斷影響其性
能，沒有受到誤用、疏忽或事故的影響，也沒有違反我們的任何商品操作印刷說明。本公司對於從我們這
邊購買的商品不會允許也不對於使用、銷售或修理任何產品有關的任何類型的任何損失或損害承擔責任。
15.
機器尺寸圖
AF-3/AF-3X
AF-3S
17
Appendix I - Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustrated in
sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal
screw.
C08AF3S001
/