dji A3 ユーザーガイド

ブランド: dji

モデル: A3

タイプ: ユーザーガイド

このマニュアルも適しています

Assistant 2 For Autopilot

DISCLAIMER AND SAFETY GUIDELINES

2017.05V1.2

免责声明和安全操作指引

Contents

Safety at a Glance 5

Notice 7

Glossary 7

Pre-ight Checklist 7

Disclaimer and Warning 8

Compliance Information 9

FCC Compliance

EU Compliance Statement

Before You Begin 10

Individual Parts 10

Regarding Genuine and Functional Parts

Flight Controller

GPS-Compass Pro

Power Management Unit (PMU)

Triple Modular Redundancy System (for A3 Pro)

Firmware

App (DJI Lightbridge 2 required)

Product Care 13

Storage and Transportation

Maintenance and Upkeep

Flight Condition Requirements 14

Weather Conditions and Surrounding Environment

Using the Flight Control System Responsibly

Flight Modes, Functions and Warnings 15

Flight Modes

Failsafe and Return-to-Home

Low Battery Warning

Compliance with Regulations & No Fly Zones 16

Regulations

No Fly Zones 17

安全概要

词汇表

飞行前检查列表

免责声明与警告

使用前须知

部件使用须知

原厂配件 22

主控器 22

GPS-CompassPro 22

PMU（PowerManagementUnit，电源管理模块） 23

冗余系统（A3Pro） 23

固件 24

App（需使用 DJILightbridge2） 24

产品保养

存储与运输 25

维护 25

飞行条件要求

天气以及环境需求 25

安全飞行 26

飞行模式和警示

飞行模式 27

失控返航 27

低电量 / 低电压 28

法律规范与飞行限制

法律规范 28

飞行限制 29

ENEN

Safety at a Glance

1. Environmental Considerations

•

Always y in areas that are clear of buildings and other

obstacles.

•

DO NOT y above or near large crowds.

•

The maximum service ceiling is determined by the

performance of the aerial platform. The battery and

propulsion system do not perform as well at high

altitudes and you should y with extra caution.

•

It is recommended to y in temperatures between 14°

and 113℉ (-10° and 45℃), without direct sunlight.

2. Pre-ight Checklist

•

Ensure that the remote controller and aircraft batteries are fully charged.

•

Ensure that the propellers are in good condition and securely fastened.

•

Ensure that there is nothing obstructing the motors.

•

Be sure to calibrate the compass at every new ight location or if the app prompts you to do so (for

DJI

Lightbridge 2 systems).

3. Operation

•

Stay away from the rotating propellers and motors.

•

Maintain line of sight of your aircraft at all times.

•

DO NOT perform the Combination Stick Command while the aircraft is airborne.

•

DO NOT answer incoming calls during ight.

•

DO NOT y under the inuence of alcohol or drugs.

•

During the Return-to-Home procedure, you can control the aircraft’s altitude to avoid obstacles.

•

In the instance of a Low Battery Warning, land the aircraft at a safe location as soon as possible.

•

Always keep your hands on the remote controller so long as the motor is still spinning.

•

Always power o the aircraft before the remote controller after landing.

4. Maintenance and Upkeep

•

DO NOT use aged, damaged or broken modules.

•

Recommended storage temperature: 41° to 95° F (5° to 35° C).

•

Recommended storage conditions: Away from heat sources, vibration and strong electric or magnetic

elds.

5. Local Laws and Regulations

•

DO NOT y in the No Fly Zones. You can nd a complete list of these areas at:

http://www.dji.com/ysafe

•

The DJI No Fly Zone is not a replacement for local government regulations or good judgment.

•

Avoid ying in areas where rescue teams are actively using the airspace.

The A3 or A3 Pro is NOT

a toy and is not suitable for

children under the age of 18.

Note that ‘Safety at a

Glance’ only provides a quick

overview of the safety tips. Make

sure you read and understand the

remaining sections of this document.

Maintain Line

of Sight

Fly Below

400 feet (120 m)

Fly in Open Areas Calibrate the

Compass

Avoid ying over or near obstacles, crowds, high voltage power lines, trees or bodies of water.

DO NOT y near strong electromagnetic sources such as power lines and base stations as these may aect

the onboard compass.

DO NOT use the aircraft in adverse weather conditions such as rain, snow, fog and strong winds.

Stay away from the rotating

propellers and motors.

No Fly Zone

Learn more at:

http://www.dji.com/ysafe/no-y

Strong GPS Signal

Notice

All instructions and other collateral documents are subject to change at the sole discretion of SZ DJI

TECHNOLOGY CO., LTD. For up-to-date product information, visit http://www.dji.com.

Glossary

The following terms are used throughout the product literature to indicate various levels of potential harm when

operating this product:

NOTICE: Procedures, which if not properly followed, create a possibility of physical property

damage AND a little or no possibility of injury.

CAUTION: Procedures, which if not properly followed, create the probability of physical property

damage AND a possibility of serious injury.

WARNING: Procedures, which if not properly followed, create the probability of property

damage, collateral damage, and serious injury OR create a high probability of supercial injury.

Read the ENTIRE user manual to become familiar with the features

of this product before operating. Failure to operate this product in

a safe and responsible manner could result in injury or damage to the product or other property.

This product is not intended for use by children without direct adult supervision.

This is a sophisticated product. It must be operated with caution and common sense and

requires some basic mechanical ability. Do not use with incompatible components or alter this

product in any way outside of the documents provided by SZ DJI TECHNOLOGY CO., LTD. These

Safety Guidelines contain instructions for safety, operation and maintenance. It is essential to

read and follow all of the instructions and warnings in the user manual, prior to assembly, setup

or use, in order to operate the product correctly and avoid damage or serious injury.

Age Recommendation: Not for children under the age of 18. This is not a toy.

Pre-ight Checklist

1. Ensure you are using genuine DJI parts and that all parts are in good condition.

2. Ensure the remote controller, aircraft battery and your mobile device (for the app) are sufciently charged.

3. Ensure the propellers are securely mounted onto the motors, and the motors can start and function

normally.

4. Ensure the redundancy system modules for the A3 Pro are working normally. Calibrate the IMU if needed.

5. Ensure that the ight control system and aircraft have the latest rmware installed.

6. Ensure your ight area is not near a No Fly Zone and that conditions are suitable for ying the aircraft.

7. DO NOT attempt to fly under the influence of alcohol, drugs or any substance that may impair your

cognitive abilities.

8. Ensure you are familiar with the selected ight mode and understand all safety functions and warnings.

9. Ensure you observe all local regulations, obtain appropriate authorization and understand the potential

risks. REMEMBER: It is solely your responsibility to comply with all ight regulations.

10. If the DJI Zenmuse Z15 is used, ensure the gimbal can rotate freely.

11. If the DJI Lightbridge 2 is used, ensure that the app and aircraft have the latest rmware installed.

12. If the DJI SDK is used, be sure to follow usage regulations stated on the DJI ofcial website.

Disclaimer and Warning

This product is NOT a toy and is not suitable for children under the age of 18. Adults should keep the A3 or A3

Pro out of the reach of children and exercise caution when operating this aircraft in the presence of children.

This product is a ight control system that offers easy ight when in good working order as set forth below. Visit

http://www.dji.com for the most current instructions and warnings and http://knowbeforeyouy.org/ for more

information about ight safety and compliance.

The information in this document affects your safety and your legal rights and responsibilities. Read this entire

document carefully to ensure proper conguration before use. Failure to read and follow the instructions and

warnings in this document may result in product loss, serious injury to you, or damage to your aircraft.

By using this product, you hereby signify that you have read this disclaimer carefully and that you understand

and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your

own conduct while using this product, and for any consequences thereof. You agree to use this product only

for purposes that are proper and in accordance with all applicable laws, rules, and regulations, including

international and domestic airspace regulations, and all terms, precautions, practices, policies and guidelines

DJI has made and may make available.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use

of this product. The user shall observe safe and lawful practices including, but not limited to, those set forth in

these Safety Guidelines.

DJI is a trademark of SZ DJI Technology Co., Ltd. (abbreviated as “DJI”) and its afliated companies. Names

of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

owner companies.

Data Storage and Usage

When you use our mobile app or our products or other software, data regarding the use and operation of the

product, such as ight telemetry data (e.g., speed, altitude, battery life, and information about the gimbal and

camera) and operations records, may be automatically or manually uploaded to and maintained on a DJI-

designated server. The internal storage device incorporated into the product stores various types of data,

including ight telemetry data. You may also provide ight telemetry data and other data to us when you

manually transmit that information from the internal storage device to us. The information that is automatically

uploaded or manually uploaded to us DOES NOT include personal data (i.e., your name, address, email, or

other information that specically identies you), but personal data, such as your user name, may become

associated with, used to identify, or tagged to such uploaded information when we store it. We separately

describe how we use your user name and other personal data on our privacy policy at http://www.dji.com/

policy. By using the product, the mobile app or other software we distribute, or by manually providing data to

us, you consent to the following:

•

Our storage of any ight telemetry data and other data uploaded or provided to us, including in

combination with your user name;

•

Our use of any such data uploaded or provided (including your user name) in connection

providing support and services to you and to improve our products;

•

Our disclosure of such data uploaded or provided (including your user name) to our agents and/

or contractors who may use it on our behalf or in connection with their relationship with us; and

•

Our disclosure of such uploaded or provided data (including your user name) as required by law,

in a matter of public safety or policy, as needed in connection with the transfer of our business

assets, or if we believe in good faith that sharing the data is necessary to protect our rights or

property.

Compliance Information

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Any changes or modications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

EU Compliance Statement

SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in compliance with the essential

requirements and other relevant provisions of the EMC Directive.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany

Before You Begin

The following documents have been produced to help you safely operate and make full use of your A3 or

A3 Pro:

In the Box

Disclaimer and Safety Guidelines

Quick Start Guide

User Manual

Check that you have all the items listed on the In the Box sheet. Read the Disclaimer and Safety

Guidelines before using this product. Then, prepare for your rst ight by reading the Quick Start Guide

and User Manual, and watching all of the tutorial videos on the DJI ofcial website (http://www.dji.com).

Make sure you fully understand the functionality of each individual part, the ight condition requirements, the

key contingency warning functions/systems, and all government regulations before each ight. If you have any

questions or problems during the assembly, maintenance or use of this product, please contact DJI or a DJI

authorized dealer.

Individual Parts

Regarding Genuine and Functional Parts

To prevent components from malfunctioning , serious injury, and property damage, observe the

following rules:

1. Use only genuine DJI parts or parts certied by DJI. Unauthorized parts or parts from non-DJI certied

manufacturers may cause system malfunctions and compromise safety.

2. Ensure that there are no foreign objects (water, oil, soil, sand, etc.) inside the A3 or A3 Pro system or

aircraft components.

3. Ensure the A3 or A3 Pro system and aircraft components (including the remote controller, gimbal,

propulsion system, and battery) are all in good working condition. Refer to the remaining sections in this

document on how to test the functionality of these components.

Flight Controller

1. The ight controller’s top side should be facing up. DO NOT mount it upside down.

2. Ensure the ight controller’s orientation is correctly congured in the DJI Assistant 2.

1. Mount the IMU Pro module parallel to the aircraft’s platform and in a position with the least vibration. The

recommended mounting position is located near the aircraft’s center of gravity.

2. The ight controller is neither waterproof nor oil-proof.

3. Check the double-sided adhesive tape regularly to ensure the ight controller is rmly secured.

GPS-Compass Pro

GPS

1. Fly in open areas. Tall buildings or steel structures may block the GPS signal and affect the accuracy

of the on-board compass.

Compass

To avoid possible serious injury and property damage, observe the following rule:

Land immediately when severe drifting occurs in ight, i.e., the aircraft DOES NOT y in straight lines.

1. Ensure the compass is calibrated before every ight. Failure to do so may lead to unexpected ight

behavior or serious accidents.

2. DO NOT attempt to calibrate your compass where there is a chance of strong magnetic interference.

This includes areas where there are massive metal objects, parking structures, steel reinforcements

underground, or under bridges.

3. DO NOT carry ferromagnetic materials, such as keys, watches or mobile phones, with you during calibration.

4. The compass should always be calibrated when moving from indoor to outdoor spaces.

5. If the LED module blinks red, compass calibration has failed. Please recalibrate.

6. After successful calibration, the compass may become abnormal when you place the aircraft on the

ground. This may be because of underground magnetic interference. Move the aircraft to another

location and try again.

7. When to calibrate:

a. When compass data is abnormal and the

LED module

is blinking red and yellow.

b. When ying in a new location or a location that is dierent from your last ight.

c. When the mechanical structure of the aircraft has changed, i.e. new mounting position of the compass.

d. When severe drifting occurs in ight, i.e. the aircraft DOES NOT y in straight lines.

Power Management Unit (PMU)

1. The PMU has an input voltage range of 10.5-51 V (3-12S battery equivalent), output voltage of 9 V and

maximum output current of 2 A. Be sure to use the PMU in strict accordance with these specications.

2. The recommended storage temperature is -20° to 50°C (-4° to 122° F).

1. DO NOT block or cover the PMU to maximize heat dissipation and system performance.

Triple Modular Redundancy System (for A3 Pro)

IMU Pro

1. The IMU Pro module’s top side should be facing up. DO NOT mount it upside down.

2. Ensure that the IMU Pro module’s orientation is correctly congured in the DJI Assistant 2.

1. Mount the IMU Pro module parallel to the aircraft’s platform and in a position with the least vibration. The

recommended mounting position is located near the aircraft’s center of gravity.

2. The IMU Pro module is neither waterproof nor oil-proof.

3. Check the double-sided adhesive tape regularly to make sure that the Flight Controller is xed rmly.

GPS-Compass Pro

1. The GPS-Compass Pro module included in the upgrade kit is the same as the one in the A3 ight

control system.

Firmware

To avoid serious injury to children and animals, observe the following rule:

1. Keep children and animals at a safe distance during any firmware upgrade, system calibration, and

parameter setting procedures.

2. For safety reasons, do not use the power battery for power supply during rmware upgrade.

1. For safety reasons, always update the rmware when the rmware update notication is shown.

2. Be sure to check all connections and remove the propellers from the motors before performing the rmware

update.

App (DJI Lightbridge 2 required)

1. Be sure to fully charge your tablet or mobile device before launching the app. A tablet is recommended

for the best user experience.

2. If you are using a phone as your mobile display device, be sure to continue ying safely when the

phone receives an incoming call. DO NOT accept phone calls during ight.

3. Read all prompted safety tips, warning messages, and disclaimers carefully. Be familiar with the related

regulations in your area. You are solely responsible for being aware of all relevant regulations and ying

in a way that is compliant.

a. Read and understand the warning messages before using the Auto-take off and Auto-land feature.

b. Read and understand the warning message and disclaimer before setting the altitude beyond the

regulatory limit.

c. Read and understand the warning messages and disclaimer before switching between the ight modes.

4. Land your aircraft immediately if there is an alert shown in the app.

5. Examine and check all warning messages on the checklist displayed in the app prior to each ight.

6. Use the in-app simulator to practice your ight skills if you have never operated the aircraft or if you do

not have sufcient experience to be comfortable operating the aircraft.

7. Beginner mode is enabled by default when you launch the app for the rst time. The aircraft’s altitude

and flight distance is restricted when flying in Beginner mode. We recommend you fly in Beginner

mode to perfect your ight skills. Operate the actual aircraft only after you are condent that you have

mastered adequate ight skills.

8. Cache the map data of the area where you intend to y the aircraft by connecting to the Internet before

each ight.

Product Care

Storage and Transportation

To avoid serious injury to children and animals, observe the following rule:

Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of reach of children

and animals.

1. The recommended storage temperature is 41° to 95° F (5° to 35° C).

2. Recommended storage conditions: No heat-source nearby; no vibration, strong magnetic eld or strong

electric eld.

3. DO NOT allow the ight control system to come into contact with, or become immersed in, water or other

liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Powering on a ight control system that has

fallen into water may cause permanent component damage. DO NOT use substances containing alcohol,

benzene, thinners or other ammable substances to clean or maintain the ight control system. DO NOT

store the ight control system in humid or dusty areas.

Maintenance and Upkeep

1. Check every part of the aircraft after any crash or violent impact. If you have any problems or questions,

please contact a DJI authorized dealer.

Flight Condition Requirements

Weather Conditions and Surrounding Environment

The flight control system is designed to operate in good to moderate weather conditions. To avoid

collision, serious injury and property damage, observe the following rules:

1. DO NOT use the ight control system in adverse weather conditions including rain, snow, fog, and

strong winds.

2. Keep the aircraft and ight control system at least 30 feet (10 meters) away from obstacles, people,

animals, buildings, public infrastructure, trees, and bodies of water when in ight. Stay even further away

from the above objects as your altitude increases.

3. Be EXTRA cautious when operating the aircraft and ight control system indoors.

1. Aircraft and battery performance is subject to environmental factors such as air density and temperature.

a. The A3 and A3 Pro systems support altitudes of up to 32,808 feet (10,000 meters) above sea level.

However, the battery and airframe performance is limited by the maximum service ceiling of the aerial

platform. You should y with extra caution at high altitudes.

b. It is recommend to y in temperatures between 14° and 113° F (-10° and 45° C), without direct sunlight.

2. DO NOT use the aircraft near accidents, fire, explosions, floods, tsunamis, avalanches, landslides,

earthquakes, dust, or sandstorms.

Using the Flight Control System Responsibly

To avoid serious injury and property damage, observe the following rules:

1. Make sure you are NOT drunk, taking drugs, under the inuence of anesthesia, or suering from dizziness,

fatigue, nausea or any other conditions, whether physical or mental, that could impair your ability to

operate the aircraft safely.

2. DO NOT perform the Combination Stick Commands when the aircraft is airborne, or else the aircraft

will crash.

3. Always power o the aircraft before the remote controller after landing.

4. DO NOT drop, launch, re or otherwise project any dangerous payloads on or at any buildings, persons or

animals, or anything that can cause personal injury or property damage.

1. Make sure you have been sufciently trained and are fully aware of any contingency plans before accidents

happen.

2. Make sure you have a ight plan and never y the aircraft recklessly.

3. DO NOT use this product for any reason other than general personal use. DO NOT use it for any illegal or

inappropriate purpose (such as spying, military operations, or unauthorized investigations).

4. DO NOT use this product to defame, abuse, harass, stalk, threaten or otherwise violate the legal rights (such

as the right of privacy and publicity) of others.

5. DO NOT trespass over the private property of others.

Flight Modes, Functions and Warnings

Flight Modes

To avoid serious injury and property damage, observe the following rule:

DO NOT switch from P-mode to either Atti mode or F-mode unless you are suciently familiar with

the aircraft’s behavior for each ight mode, since disabling GPS may result in being unable to land the

aircraft safely.

P-mode is preferred for most ying scenarios. Users can switch to Atti mode where and when P-mode is

unavailable. Be aware that some features are NOT available in Atti mode, and take EXTRA caution when ying

in Atti mode.

1. P-mode (Positioning): P-mode works best when the GPS signal is strong. There are three different states of

P-mode, which will be automatically selected by the ight control system depending on GPS signal strength

and Vision Positioning sensors:

a. P-GPS: GPS and Vision Positioning are both available, and the aircraft is using GPS for positioning.

b. P-OPTI*: If GPS is NOT available, the aircraft will use the Vision Positioning System to hover accurately.

c. P-ATTI: When neither GPS nor Vision Positioning is available, the aircraft is using only its barometer for

positioning, so only altitude is controlled.

2. Atti mode (Attitude): The GPS and Vision Positioning System are NOT used for positioning. The aircraft only

uses its barometer to maintain altitude. If it is still receiving a GPS signal, the aircraft can automatically return

home if the Remote Controller signal is lost and if the Home Point has been recorded successfully.

3. F-mode (Function): Intelligent Flight is activated in this mode. Be sure you are familiar with Intelligent Flight

functions before use.

4. Manual mode: Only use it in emergency situations.

* P-OPTI requires a DJI Vision Positioning System (e.g. DJI Guidance). Note that the Vision Positioning System

may NOT work properly when the aircraft is ying over water, over surfaces without a clear pattern, or in a

low light environment.

If you intend to switch to modes that disable GPS assistance (e.g., Atti mode), you are required to accept

the prompted disclaimer to enable this function. If this function is enabled, you further understand and agree

that data including but not limited to ight telemetry data and function records could be uploaded to and

maintained on a DJI designated server.

Failsafe and Return-to-Home

1. The Return-to-Home feature will NOT work if the GPS signal is insufcient or if GPS is not active.

2. Enable Smart RTH to bring the aircraft back to the Home Point instead of turning off the remote controller.

3. Tall buildings may adversely affect the Failsafe function. Please adjust the aircraft location, altitude and

speed while returning home to avoid obstacles.

4. Make sure to always y the aircraft within the transmission range of the remote controller.

5. Only use the Failsafe and Return-to-Home functions in case of emergency, as they may be affected by the

weather, the environment, or any nearby magnetic elds.

6. The aircraft cannot avoid obstacles during Failsafe RTH; therefore it is important to set an appropriate

Failsafe altitude before each ight.

Low Battery Warning

1. When the Critical Battery Level Warning (or Critical Low Voltage Warning) activates and the aircraft is

descending automatically, you may push the throttle up to maintain the aircraft's altitude and navigate it to a

more appropriate location for landing.

2. When battery (or voltage) warnings are triggered, promptly bring the aircraft back to the Home Point or land

to avoid losing power during ight and causing damage to the aircraft, property, animals, and people.

Compliance with Regulations & No Fly Zones

Regulations

To avoid non-compliant behavior, serious injury and property damage, observe the following rules:

1. DO NOT operate in the vicinity of manned aircraft, regardless of altitude. (Land immediately if necessary)

2. DO NOT fly the aircraft in densely populated areas, including cities, sporting events, exhibitions,

performances, etc.

3.DONOTytheaircraftabovetheauthorizedaltitude.RemainwellclearofanddoNOTinterferewithmanned

aircraft operations. Be aware of and avoid other aircraft and obstacles at all times.

To avoid non-compliant behavior, serious injury and property damage, observe the following rules:

1. DO NOT y the aircraft near or inside no-y zones specied by local laws and regulations. The no-y zone

list includes: airports, borders between two sovereign countries or regions, major cities/regions, etc., and is

continuously updated.

2. DO NOT y the aircraft above the authorized altitude

3. ALWAYS keep your aircraft within visual line of sight (VLOS), and use an observer to assist if needed.

4. NEVER use the aircraft to carry illegal or dangerous goods/payloads.

1. Make sure you understand the nature/type of your ight operation (such as for recreation, for public

use, or for commercial use) and have obtained corresponding approval and clearance from the

related government agencies before flight. Consult with your local regulators for comprehensive

denitions and specic requirements. For users operating their aircraft in the United States, please

rst visit http://www.knowbeforeyouy.org/ and take action appropriate to your circumstances.

2. Please note that remote controlled aircraft may be banned from conducting commercial activities in certain

countries and regions. Check and follow all local laws and ordinances before ying as those rules may differ

from those stated here.

3. DO NOT y around sensitive infrastructure or property such as power stations, water treatment facilities,

correctional facilities, heavily traveled roadways, government facilities, military zones, etc.

4. Respect the privacy of others when using the camera. DO NOT conduct surveillance operations such as

capturing images or recording video of any person, entity, event, performance, exhibition, and property

without authorization or where there is an expectation of privacy, even if the image or video is captured for

personal use.

5. Please be advised that in certain areas, the recording of images and videos from events, performances,

exhibitions, or commercial properties by means of a camera may contravene copyright or other legal rights,

even if the image or video was shot for personal use.

No Fly Zones

DJI always stresses safety during ight, and has therefore developed various aids to help users comply with

local rules and regulations while ying. We strongly recommend that you update the rmware to the latest

version to ensure the following features are fully updated:

No Fly Zones

1. No Fly Zones include but are not limited to major airports around world, borders between two sovereign

countries or regions, major cities/regions, etc.

2. The complete list of No Fly Zones is listed on the ofcial DJI website at http://ysafe.dji.com/no-y and is

subject to periodic updates in line with the latest regulatory requirements without prior notice.

3. Some No Fly Zones are comprised of several zones. Each zone features circles of various sizes. The aircraft

will NOT be able to take off in the inner most zone of the No Fly Zone, and will descend to the specied

altitude when it approaches the edge of the inner most zone. Ground station functionality is disabled when

the aircraft is within a No Fly Zone.

4. Users are NOT able to set up waypoints within No Fly Zones.

Altitude Limit

1. It is recommended to y NO higher than 400 feet (120 meters) above ground level and stay away from any

surrounding obstacles.

2. If you intend to y above the default altitude limit, you are required to accept the prompted disclaimer

to enable the new altitude limit. If a new altitude limit is set, you further understand and agree that data

including but not limited to flight telemetry data and altitude limit changes could be uploaded to and

maintained on a DJI-designated server.

安全概要

1.环 境

•

在远离人群的开阔场地飞行。

•

飞行海拨高度由飞行器性能决定。高海拔环境因素将

影响电池和动力系统，导致飞行器性能下降，因此，

请务必了解您的飞行器性能，并谨慎飞行。

•

在 -10℃至 45℃（非太阳直射条件下），天气良好

的环境中飞行。

•

在合法区域飞行，详见第 5 条。

2.检 查

•

确保各设备的电量充足。

•

确保螺旋桨无破损并且安装牢固。

•

确保飞行器电机清洁无损。

•

根据 App 提示进行飞行前检查并校准指南针（仅限使用 DJI

Lightbridge2）。

3.操 作

•

切勿靠近转动中的螺旋桨和电机。

•

在视距范围内飞行。

•

飞行时掰杆停机将导致飞行器坠落。

•

飞行过程中请勿接打电话，切勿在神志受到酒精或药物的影响下操作飞行器。

•

低电量（或低电压）警示时请尽快返航。

•

飞行器自动返航时不会自行躲避障碍物，如果遥控信号正常，可通过遥控器控制飞行航向。

•

降落后，飞行器电机未停止前务必保持遥控器在手。电机停止后请先关闭飞行器，再关闭遥控器。

4.保 养

•

定期检查飞行控制系统各模块状态。

•

飞行控制系统适合在 5℃至 35℃干燥、附近无热源、无振动、无强磁场、无强电场的环境中长

期存放。

5.限飞与当地法规

•

严禁在限飞区域中飞行。浏览该地址 http://www.dji.com/cn/flysafe以获取最新的限飞区域列表。

•

推荐控制飞行高度在 120 米以下，飞行时需严格遵守当地法律法规。

使用 A3 / A3 Pro 飞行控制系

统的飞行器具有一定的安全风

险，不适合未满 18 岁的人士

使用。

安全概要仅包含部分的飞行安全知识，

请务必仔细阅读免责声明和安全操作指

引的全部内容。

在开阔无遮挡

的环境中飞行

校准指南针在目视范

围内飞行

控制飞行高度

低于 120 米

飞行时请远离人群、树木、电线、高大建筑物、机场和信号发射塔等。

无线电发射塔、高压线、变电站以及具有磁性的大块金属可能会对遥控信号及指南针产生干扰，威胁飞行安全。

下雨、雷电、大雾、下雪、大风等天气请勿飞行。

切勿接触工作旋转中的螺旋桨，

否则可能受到严重人身财产损害。

禁飞区

详情请访问以下网址 :

http://www.dji.com/cn/ysafe/no-y

GPS 信号良好

词汇表

本产品使用以下词条对因操作不当可能带来的潜在危险分级加以说明。

注意：如果不遵循说明进行操作，可能会导致财产损失和轻微伤害。

小心：如果不遵循说明进行操作，可能会导致财产损失和较严重伤害。

警告：如果不遵循说明进行操作，可能会导致财产损失、重大事故和严重伤害。

飞行前检查列表

1. 仅使用 DJI 正品部件并保证所有部件工作状态良好。

2. 确保遥控器，飞行器电池以及移动设备电池电量充足。

3. 确保所有螺旋桨皆已正确安装至电机上。电机能够正常启动。

4. 检查冗余系统模块状态，根据提示进行校准。

5. 确保固件已经更新至最新版本。

6. 确保飞行场所处于飞行限制区域之外，且飞行场所适合进行飞行。

7. 用户应确保自己不在醉酒、药物影响下操控飞行器。

8. 熟悉了解每种飞行模式。熟悉失控返航模式下飞行器的行为。

9. 用户应自行了解当地有关飞行器的法律法规。如有必要，用户需自行向有关部门申请授权使用飞

行器。

10. 使用云台时，确保云台能够无阻碍地活动。

11. 使用 DJI Lightbridge 2 和 DJI GO App 时，确保 App 已经更新至最新版本。

12. 使用 SDK 时，请遵守 DJI 网站 https://developer.dji.com/cn/ 中相关的守则和规定。

通过阅读整个用户手册，熟悉产品的功能之后再进行操作。如果没有

正确操作本产品可能会对自身或他人造成严重伤害，或者导致产品损

坏和财产损失。本产品较为复杂，需要经过一段时间熟悉后才能安全使用，并且需要具备一

些基本常识后才能进行操作。本产品不适合儿童使用。切勿使用非 DJI 提供或建议的部件，

必须严格遵守 DJI 的指引安装和使用产品。本指引文档包含安全、操作和维护等说明。在进

行组装、设置和使用之前务必仔细阅读用户手册中的所有说明和警告。

ページが読み込まれています...

dji A3 ユーザーガイド

ブランド: dji

モデル: A3

タイプ: ユーザーガイド

このマニュアルも適しています

Assistant 2 For Autopilot

PDFをダウンロードします

報告

他の言語で

English: dji A3 User guide

dji A3 ユーザーガイド

このマニュアルも適しています

dji A3 ユーザーガイド

他の言語で

関連論文

その他のドキュメント