•
•
© 2008
DR-HS5_j.fm 1 ページ ２００８年１１月１１日 火曜日 午後６時４１分
002a
• Do not open or perform any internal
modifications on the unit.
.............................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
.............................................................................................................
104
• Try to prevent cords and cables from
becoming entangled. Also, all cords
and cables should be placed so they
are out of the reach of children.
.............................................................................................................
118a
• Should you remove the cord clamp,
keep them in a safe place out of
children’s reach, so there is no
chance of them being swallowed
accidentally.
.............................................................................................................
The pin assignment for XLR type connectors is as shown right.
Before making any connections, make sure that this pin
assignment is compatible with that of all your other devices.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
Pin Assignment
Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and
“IMPORTANT NOTES.” These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, owner’s manual should be read in its entirety.
The manual should be saved and kept on hand as a convenient reference.
This product is a dynamic microphone.
• Do not use this microphone with a phantom
power supply designed for condenser
microphones; doing so may damage this
microphone.
921
• To avoid acoustic feedback and damage to
your sound reproduction system, you must
minimize the volume of all your equipment
before connecting this microphone to
another device.
• Always handle either the microphone
themselves or the plug, not the cord. This
will help in maintaining the electrical
integrity of the cord by preventing any
damage to it.
983
• Howling could be produced depending on
the location of microphones relative to
speakers. This can be remedied by:
1. Changing the orientation of the microphone.
2. Relocating microphone at a greater distance
from speakers.
3. Lowering volume levels.
354a
• Do not expose the unit to direct sunlight,
place it near devices that radiate heat, leave
it inside an enclosed vehicle, or otherwise
subject it to temperature extremes.
Excessive heat can deform or discolor the
unit.
401a
• When the microphone need cleaning, wipe
them with a soft, dry cloth.
• If you experience any abnormality in the
skin area contacted by the headphones,
immediately stop using them.
• Adjust the shaft by bending it so that the tip of
the microphone is near the corner of your
mouth.
• Use the cord clamps to fasten the microphone
cord so that it does not hinder your performance.
Move the cord clamps to adjust the location at
which the cord is fastened.
IMPORTANT NOTES
How to Wear the Microphone
Shaft
Cord
clamp
* In the interest of product improvement, the specifications and/or appearance of this
unit are subject to change without prior notice.
Copyright © 2008 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written
permission of ROLAND CORPORATION.
Polar Pattern
Frequency Response
Main Specifications
Element
Dynamic
Polar Pattern
Uni-Direction
Frequency Responce
100Hz–15,000Hz
Sensitivity
-53.5 ±4 dB (0 dB= 1 V/Pa at 1,000 Hz)
Impedance
600
Ω
Weight
170 g/6 oz (52g/2 oz without cord)
Cord
5 m (15’)
Plug
XLR Type
DR-HS5_e.fm 1 ページ ２００８年１１月１１日 火曜日 午後６時４３分
/