tp-link Omada Pro Gigabit VPN Router

TP-LINK tp-link Omada Pro Gigabit VPN Router 取扱説明書

こんにちは！TP-Link Omada Pro ルータ（G611、OC300、G36）と電源アダプタ（T120100-2B1）の規制準拠に関するドキュメントの内容を読み終えました。FCC、CE、UKCA、カナダの規制への適合性、安全情報、リサイクル情報などについて質問があれば、お気軽にお尋ねください。
G611ルータはどのクラスのデジタルデバイスに準拠していますか？

住宅地でOmada OC300を使用するとどうなりますか？

G36ルータのFCC準拠クラスは？

T120100-2B1電源アダプタの規制準拠情報は？

欧州連合における適合宣言はどこで確認できますか？

Regulatory Compliance

Omada Pro Router

© 2023 TP-Link 1910013454 REV1.0.0

For Class A product with no power adapter:

FCC Compliance Information Statement

Product Name: Router

Model Number: G611

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Product Name: Omada Hardware Controller

Model Number: OC300

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

We, TP‑Link USA Corporation, has determined that the equipment shown as above has been

shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized

change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2023/7/18

CE Mark Warning

This is a class A product. In a domestic environment, this product may cause radio interference, in

which case the user may be required to take adequate measures.

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and

other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UKCA Mark

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and

other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical

Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Industry Canada Statement

CAN ICES-3 (A)/NMB-3(A)

この装置は、クラス A 情報技術装置です。この装置を家庭環境で使用すると電波妨害を引き起こすことが

あります。この場合には使用者が適切な対策を講ずるよう要求されることがあります。

VCCI‑A

BSMI Notice

安全諮詢及注意事項



■請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。



■清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。



■注意防潮，請勿將水或其他液體潑灑到本產品上。



■插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。



■請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。



■不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。

警告：為避免電磁干擾，本產品不應安裝或使用於住宅環境。

限用物質含有情況標示聲明書

單元

限用物質及其化學符號

鉛

Pb 汞

Hg 鎘

Cd 六價鉻

Cr+6 多溴聯苯

PBB 多溴二苯醚

PBDE

PCB ○ ○ ○ ○ ○ ○

外殼 ○ ○ ○ ○ ○ ○

電源供應板 — ○ ○ ○ ○ ○

其他及其配件 ○ ○ ○ ○ ○ ○

備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。

備考2."○"係指該項限用物質之百分比含量未超出百分比含量基準值。

備考3."—" 係指該項限用物質為排除項目。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам

нормативних документів та вимогам, що передбачені чинними законодавчими актами

України.

Safety Information

■Keep the device away from water, fire, humidity or hot environments.

■Do not attempt to disassemble, repair, or modify the device. If you need service, please

contact us.

■Place the device with its bottom surface downward.

■Plug the product into the wall outlets with earthing connection through the power supply

cord.

■ The operating temperature for the device shall be within 0˚C to 40˚C (32˚F to 104˚F).

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use

this product with care and operate at your own risk.

*This caution applies to G611.

Explanations of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power

supply. Symbols may vary from products.

Symbol Explanation

Class II equipment

Class II equipment with functional earthing

Alternating current

Direct current

Polarity of d.c. power connector

For indoor use only

Dangerous voltage

Caution, risk of electric shock

Energy efficiency Marking

Protective earth

Earth

Frame or chassis

Functional earthing

Caution, hot surface

Caution

Operator's manual

Stand-by

"ON"/"OFF" (push-push)

Fuse

Fuse is used in neutral N

RECYCLING

This product bears the selective sorting symbol for Waste

electrical and electronic equipment (WEEE). This means that

this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize

its impact on the environment.

User has the choice to give his product to a competent

recycling organization or to the retailer when he buys a new

electrical or electronic equipment.

Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs

mSwitch of mini-gap construction

µ

Switch of micro-gap construction (for US version)

Switch of micro-gap / micro-disconnection construction (for

other versions except US)

εSwitch without contact gap (Semiconductor switching device)

For Class B product with power adapter:

FCC Compliance Information Statement

Product Name: Router

Model Number: G36

Component Name Model

Power Adapter T120100-2B1

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

Product Name: Power Adapter

Model Number: T120100-2B1

Responsible party:

TP-Link USA Corporation

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

■Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

We, TP‑Link USA Corporation, has determined that the equipment shown as above has been

shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized

change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2023/7/18

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in

which case the user may be required to take adequate measures.

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and

other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and

(EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/support/ce/

UKCA Mark

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and

other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical

Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,

Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR

d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage;

2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est

susceptible d’en compromettre le fonctionnement.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

BSMI Notice

安全諮詢及注意事項



■請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。



■清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。



■注意防潮，請勿將水或其他液體潑灑到本產品上。



■插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。



■請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。



■不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。

限用物質含有情況標示聲明書

單元

限用物質及其化學符號

鉛

Pb 汞

Hg 鎘

Cd 六價鉻

Cr+6 多溴聯苯

PBB 多溴二苯醚

PBDE

PCB ○ ○ ○ ○ ○ ○

外殼 ○ ○ ○ ○ ○ ○

電源供應器 — ○ ○ ○ ○ ○

其他及其配件 ○ ○ ○ ○ ○ ○

備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。

備考2."○"係指該項限用物質之百分比含量未超出百分比含量基準值。

備考3."—" 係指該項限用物質為排除項目。

Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам

нормативних документів та вимогам, що передбачені чинними законодавчими актами

України.

Safety Information

■Keep the device away from water, fire, humidity or hot environments.

■Do not attempt to disassemble, repair, or modify the device. If you need service, please

contact us.

■Do not use damaged charger or USB cable to charge the device.

■Do not use any other chargers than those recommended.

■Adapter shall be installed near the equipment and shall be easily accessible.

■Place the device with its bottom surface downward.

■Use only power supplies which are provided by manufacturer and in the original packing of

this product. If you have any questions, please don't hesitate to contact us.

■ The operating temperature for the device shall be within 0˚C to 40˚C (32˚F to 104˚F).

Please read and follow the above safety information when operating the device. We cannot

guarantee that no accidents or damage will occur due to improper use of the device. Please use

this product with care and operate at your own risk.

Explanations of the symbols on the product label

Note: The product label can be found at the bottom of the product and its I.T.E. power

supply. Symbols may vary from products.

Symbol Explanation

Class II equipment

Class II equipment with functional earthing

Alternating current

Direct current

Polarity of d.c. power connector

For indoor use only

Dangerous voltage

Caution, risk of electric shock

Energy efficiency Marking

Protective earth

Earth

Frame or chassis

Functional earthing

Caution, hot surface

Caution

Operator's manual

Stand-by

"ON"/"OFF" (push-push)

Fuse

Fuse is used in neutral N

RECYCLING

This product bears the selective sorting symbol for Waste

electrical and electronic equipment (WEEE). This means that

this product must be handled pursuant to European directive

2012/19/EU in order to be recycled or dismantled to minimize

its impact on the environment.

User has the choice to give his product to a competent

recycling organization or to the retailer when he buys a new

electrical or electronic equipment.

Caution, avoid listening at high volume levels for long periods

Disconnection, all power plugs

mSwitch of mini-gap construction

µ

Switch of micro-gap construction (for US version)

Switch of micro-gap / micro-disconnection construction (for

other versions except US)

εSwitch without contact gap (Semiconductor switching device)

/

関連論文

その他の書類