Memory Module - Warranty Statement
The following limited warranty applies to GIGABYTE memory products. The limited warranty applies to the original
end user customer of the product so long as the original end user customer owns the product. This limited warranty
is non-transferable. GIGABYTE provides replacement or repair services to our customer for defective products
within the applicable warranty period. If any, please check on https://www.gigabyte.com for more product detail.
Limitation Of Warranty
This limited warranty covers only repairs or replacement of GIGABYTE products. Please note that GIGABYTE
is not responsible for providing free repairs if any of the following applies:
1. Damage is caused by natural calamities, accidents, vandalism, power problems or any inappropriate
usage.
2. Damage is caused by accessories, wrapping materials and rellable goods other than the memory
module itself.
3. Product has been used with third-party accessories.
4. Product has been repaired or disassembled by unauthorized technicians.
5. The warranty label, product serial number is altered, damaged, unclear or missing.
6. Product serial number does not conform to the number issued by GIGABYTE or the label has been
damaged.
7. Products were purchased from unauthorized distribution channels.
8. Product compatibility problems don’t result from any defect in the GIGABYTE memory module.
Duration of Warranty
Memory modules are covered by a “limited warranty”.* The warranty period starts from the day of purchase.
If the product is damaged due to natural causes, free maintenance service is provided during the product’s
service life. Proof of the original purchase date is required for this Warranty Service.
* The limited warranty vary by countries, please visit GIGABYTE website for more detail warranty information.
Additional Remarks
For certain products, maintenance is done by replacing them with reserved products; therefore it is
possible that after maintenance, the product returned to the consumer may not be the original one sent
in for maintenance.
Due to high product turnover, if the product is no longer under production or the original manufacturer no
longer provides maintenance, GIGABYTE will replace it with a substitute.
Caution
Recommended voltage is shown on DRAM label.
Always turn off your computer before installing or removing a memory module.
Only for specic Motherboards and/or CPUs can the product operate at specied data rate.
GIGABYTE will not be liable for any damage resulting from user’s improper over-clocking application or usage.
Product Exchange and Information Required
Send the defective product back to the dealer where it was purchased.
During the procedure, we may need you to specify in detail the product’s model, serial number, date of
purchase and describe the trouble you came across.
To avoid damage due to poor packing, and/or shipping damage, use proper packing material when sending
the device for service and repair.
After we receive the product requested for maintenance and conrm that the damage is due to the decient
manufacturing process or poor materials, we will immediately send you a well-functioning product.
GIGABYTE only accepts product exchanges if the full package is sent back. Full package meaning all the
material inside the package has to be returned for a valid swap.
12WE6-A32G60R-10GR
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Desktop Memory Module
Trade Name: GIGABYTE
Model Number: ARS32G60D5R
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus
complies with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage
Directive 2014/35/EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been tested
and found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU)
2015/863 Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB,
DEHP, BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement.
Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic
chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulll the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic
Equipment) (recast) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of
electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected
separately, and disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not
be disposed of with other waste. Instead, the device should be taken to the waste collection centers for
activation of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact
your local government ofce, your household waste disposal service or where you purchased the product
for details of environmentally safe recycling.
End of Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates that this product must not
be disposed of with other waste. Instead, the device should be taken to the waste collection centers for
activation of the treatment, collection, recycling and disposal procedure.
Déclaration de Conformité aux Directives de l'Union européenne (UE)
Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité
Electromagnétique 2014/30/UE, directive Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE & la déclaration
2015/863.
La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables.
European Union (EU) CE-Konformitätserklärung
Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU,
Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und
die 2015/863 Erklärung. Die Konformität mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards
zurEuropäischen Normierung beurteilt.
CE declaração de conformidade
Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão
2014/35/EU; Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a
declaração 2015/863. A conformidade com estas diretivas é vericada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad
Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC
(2014/30/EU), Directiva de bajo voltaje (2014/35/EU), Directiva de Ecodiseño (2009/125/EC), Directiva RoHS (recast)
(2011/65/EU) y la Declaración 2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas
armonizadas.
Contact point for EU based customers
G.B.T. Technology Trading GmbH
Am Stadtrand 63, 22047 Hamburg, Germany
tel: +49-40-25 33 040
Memory Module Quick Installation Guide
BSMI CNS15663 限用物質含有情況標示聲明書
Declara�on of the Presence Condi�on of the Restricted Substances Marking
設備名稱：Desktop Memory Module 型號（型式）：ARS32G60D5R
Equipment name Type designa�on (Type)
單元Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷電路板總成
PCB Assembly
晶片
Chip
散熱片
Heat Sink
其他塑膠組件 (設計選配)
Other plas�c components
(Design op�ons)
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted
substance exceeds the reference percentage value of presence condi�on.
備考2. "○"係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage
of reference value of presence.
備考3. "－"係指該項限用物質為排除項目。
Note 3: The "－" indicates that the restricted substance corresponds to the exemp�on.
关于符合中国《电器电子产品有害物质限制使用管理办法》的声明
Administra�ve Measures for the Restricted Use of Hazardous Substances in Electrical and Electronic Products
(China RoHS Declara�on)
产品中有害物质的名称及含量
Hazardous Substances Table
部件名称(Parts)
有害物质(Hazardous Substances)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板总成
PCB Assembly × ○ ○ ○ ○ ○
芯片
Chip ○ ○ ○ ○ ○ ○
散热片
Heat Sink ○ ○ ○ ○ ○ ○
其他塑胶组件 (设计选配)
Other plas�c components
(Design op�ons)
○ ○ ○ ○ ○ ○
These tables are prepared in accordance with the provisions of SJT 11364
本表格依据SJ/T 11364 的规定编制。
○： The content of such hazardous substance in all homogeneous materials of such component is below the
limit required by GB/T 26572.
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
×： The content of such hazardous substance in a certain homogeneous material of such component is
beyond the limit required by GB/T 26572.
表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
Desktop Memory
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
Installation Guide
1. Please turn off your computer and disconnect the AC
power cord.
2. Before touching the DRAM module and/or any electronic
components on the motherboard, make sure to touch a
grounding metal object to discharge any static electricity
that might be stored on your body or clothing.
3. If all memory slots are used, the memory with lower
density shall be removed when installing a new memory.
4. Suggest to install memory with identical density & data
rate on single system for better and stable performance.
5. Modules should only be inserted/ removed when the
clips are in an open position.
6. During installation, make sure the memory module is
properly aligned to the slot, then fully insert the module
all the way into the slot. Proper installation should
automatically force the retaining clips to a closed
position. Always make sure the memory module is
securely installed into the memory slot on your system.
7. Turn on the computer.
English
Desktop Speicher
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
Installatiegids
1. Bitte schalten Sie Ihren Computer aus und ziehen Sie
das Netzkabel ab.
2. Bevor Sie das DRAM-Modul und/oder elektronische
Komponenten auf dem Motherboard berühren, stellen
Sie sicher, dass Sie einen geerdeten Metallgegenstand
berühren, um statische Elektrizität zu entladen, die auf
Ihrem Körper oder Ihrer Kleidung gespeichert sein könnte.
3. Werden alle Speichersteckplätze genutzt, so muss bei
der Installation eines neuen Speichers der Speicher mit
geringerer Dichte entfernt werden.
4. Empfohlen wird die Installation von Speicher mit
identischer Dichte und Datenrate auf einem einzelnen
System für eine bessere und stabilere Leistung.
5. Module dürfen nur in geöffneter Position der Clips
eingesetzt/entfernt werden.
6. Vergewissern Sie sich bei der Installation, dass das
Speichermodul richtig auf den Steckplatz ausgerichtet ist,
und stecken Sie es dann vollständig in den Steckplatz ein.
7. Die korrekte Montage sollte die Halteklammern
automatisch in eine geschlossene Position bringen.
8. Vergewissern Sie sich immer, dass das Speichermodul
fest in den Speichersteckplatz Ihres Systems eingebaut ist.
Deutsch
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
1.
2.
3.
4.
5.
6.
7.
Memoria Para PCs de Sobremesa
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
Guía de Instalación
1. Apague la computadora y desconecte el cable de
alimentación.
2. Antes de tocar el módulo DRAM y / o cualquier
componente electrónico en la placa madre, asegúrese
de tocar un objeto de metal con conexión a tierra para
descargar la electricidad estática que pueda tener su
cuerpo o en su ropa.
3. Si se utilizan todas las ranuras de memoria, se
eliminará la memoria con menor densidad cuando se
instale una nueva memoria.
4. Sugerimos instalar memorias con la misma densidad
y velocidad de datos en un solo sistema para mejor
rendimiento y estabilidad.
5. Los módulos solo deben insertarse/retirarse cuando los
clips están en una posición abierta.
6. Durante la instalación, asegúrese de que el módulo de
memoria esté alineado correctamente con la ranura,
luego inserte completamente el módulo en la ranura. La
instalación adecuada debería forzar automáticamente
los clips de retención a una posición cerrada. Siempre
asegúrese de que el módulo de memoria esté bien
instalado en las ranuras de memoria de su sistema.
Español
32 GB Kit (2 x 16 GB) DDR5 6000
1.
2.
3.
4.
5.
6.
7.
Комплект модулей ОЗУ для настольных ПК
32 Гбайт (2 x 16 Гбайт) DDR5 6000 MHz
инструкция по установке
1. Пожалуйста, выключите компьютер и отсоедините
силовой кабель питания.
2. Прежде чем прикасаться к DRAM-модулю и/или любым
электронным компонентам на материнской плате,
обязательно коснитесь металлического предмета,
способного выполнять функцию заземления, чтобы
разрядить статическое электричество, которое может
оставаться на Вашем теле или одежде.
3. Если планируется задействовать все DIMM-разъемы
для модулей ОЗУ, до установки новой памяти модули
с меньшей плотностью должны быть удалены. >
Рекомендуем установить модули ОЗУ одинаковой
плотности с идентичной скоростью передачи данных
для максимальной производительности и стабильной
работы системы.
4. Модули можно инсталлировать / удалять только в
том случае, если фиксаторы находятся в открытом
положении.
5. В процессе инсталляции убедитесь, что модуль
памяти корректно сориентирован и выровнен по
отношению к DIMM-разъему, а затем приложите
равномерное усилие по всей длине модуля и
установите его в разъем. Корректная инсталляция
сопровождается автоматическим переводом
фиксаторов в закрытое положение. Всегда следите
за тем, чтобы модули памяти были установлены без
перекосов и на всю глубину DIMM-разъемов.
Русский
데스크탑 메모리
32 GB 키트 (2 x 16 GB) DDR5 6000 MHz
설치 설명서
1. 컴퓨터의 전원을 종료한 후, AC 파워 코드를
뽑으십시오.
2. 메모리 모듈 또는, 메인 보드의 다른 전자 부품을
만지기 전에, 몸이나 옷의 정전기가 방전 될 수
있도록 접지 금속 물체를 만지십시오.
3. 현재 메인 보드의 모든 메모리 슬롯을 사용하고
있다면, 새 메모리 모듈을 설치하기 위해서는 이미
설치된 메모리 중 가장 작은 용량의 메모리 모듈을
제거하여 주십시오.
4. 하나의 데스크탑 PC 시스템에서 보다 안정적이고
나온 성능을 발현하기 위해서는 같은 용량, 같은
클럭 속도의 메모리를 설치하는 것을 권장합니다.
5. 메모리 모듈은 슬롯의 클립이 열렸을 때만 삽입
또는 제거가 가능합니다.
6. 올바른 설치를 위해 메모리 모듈이 슬롯에
올바르게 정렬되어 있는지 확인한 후, 모듈을 슬롯
안으로 끝까지 삽입하십시오. 올바르게 모듈이
설치가 되면, 클립이 자동으로 닫혀집니다. 항상
메모리 모듈이 데스크탑 PC의 메모리 슬롯에
단단히 설치되어 있는지 확인하십시오.
한국어
32 GB 2 x 16 GB DDR5 6000 MHz
1. AC
2. DRAM
3.
4.
5.
6.
Memória para Computadores
32 GB Kit (2 x 16 GB) DDR5 6000 MHz
Installation Guide
1. Desligue o computador e desconecte o cabo de
alimentação.
2. Antes de tocar no módulo DRAM e / ou em qualquer
componente eletrônico da placa-mãe, certique-se
de tocar em um objeto de metal com aterramento para
descarregar qualquer eletricidade estática que possa
estar armazenada em seu corpo ou roupa.
3. Se todos os slots de memória estiverem em uso, a
memória com menor densidade será removida ao
instalar uma nova memória.
4. É Sugerido a instalação de memória com densidade
e taxa de dados idênticas em um único sistema para
melhor desempenho e estabilidade.
5. Os módulos só devem ser inseridos / removidos quando
os clipes estiverem em uma posição aberta.
6. Durante a instalação, verique se o módulo de
memória está corretamente alinhado com o slot e insira
totalmente o módulo na ranhura. A instalação adequada
deve forçar automaticamente os clipes de retenção
para a posição fechada. Certique-se sempre de que o
módulo de memória esteja rmemente instalado no slot
de memória do sistema.
Português
/