Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Desktop Memory Module
Trade Name: GIGABYTE
Model Number: GP-UDPRO256G/GP-UDPRO512G/GP-UDPRO1T
Responsible Party – U.S. Contact Information: G.B.T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies
with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage
Directive 2014/35/EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been tested and
found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU)
2015/863 Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP,
BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at
GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic
Equipment) (recast) directive. The WEEE Directive species the treatment, collection, recycling and disposal of electric and
electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and
disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your
local government ofce, your household waste disposal service or where you purchased the product for
details of environmentally safe recycling.
End of Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal procedure.
Déclaration de Conformité aux Directives de l'Union européenne (UE)
Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité Electromagnétique
2014/30/UE, directive Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE & la déclaration 2015/863.
La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables.
European Union (EU) CE-Konformitätserklärung
Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU,
Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und
die 2015/863 Erklärung. Die Konformität mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards
zurEuropäischen Normierung beurteilt.
CE declaração de conformidade
Este produto com a marcação CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/
EU; Diretiva CEM 2014/30/EU; Diretiva Conceção Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declaração
2015/863. A conformidade com estas diretivas é vericada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad
Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC (2014/30/
EU), Directiva de bajo voltaje (2014/35/EU), Directiva de Ecodiseño (2009/125/EC), Directiva RoHS (recast) (2011/65/EU) y
la Declaración 2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas.
Contact point for EU based customers
G.B.T. Technology Trading GmbH
Bullenkoppel 16, 22047 Hamburg, Germany
tel: +49-40-25 33 040
GIGABYTE Solid State Drive (SSD) - Limited Warranty
Thank you for purchasing a GIGABYTE Solid State Drive(SSD). Before using this product, please read and
review the Limited Warranty thoroughly. Your use of this product indicates that you have accepted and agreed
to the terms and conditions of this Limited Warranty statement.
GIGABYTE warrants to the original purchasers of this Product that this Product (excluding content and/or
software, if applicable, supplied with or within the Product) will be free from material defects in manufacture,
conform to GIGABYTE 's published product specications, and be t for normal use during the applicable
"Warranty Period" specied below.
The "Warranty Period" referred to above is: certain years from the date of delivery of the Product, provided
the Product conforms to and is used in accordance with GIGABYTE's applicable product data sheet and
product endurance specication. Warranty period may vary by countries, please visit GIGABYTE website
for more detail information or contact with local RMA service center.
Warranty coverage requires proof of purchase documentation with evidence of the date of purchase (sales
receipt or invoice) and original packaging.
Should GIGABYTE, under its discretion, deem that the product suffers from material defects in manufacture,
GIGABYTE's sole obligation under this warranty is to replace or repair for free of charge, the defective
product or all of the product's defective parts.
If this Warranty covers a returned Product, the returned Product may be repaired or an equivalent product
to the Product may be made available by the Reseller to the original purchaser. The previous sentence
describes the sole and exclusive remedy available in the event this Warranty covers a returned Product.
These warranties are valid only for the original owner of the product. GIGABYTE will not extend their
warranty to items that are purchased secondhand. This warranty is not assignable; products purchased
from secondhand sources are not covered in the warranty by GIGABYTE. This is still true even if the
product or packaging appears sealed, advertised as new, or never used in any way. GIGABYTE only offers
warranties for items sold by authorized retailers, system builders, and distributors.
This Warranty does not cover any damage to this Product which results from accident, abuse, misuse,
natural or personal disaster, or any unauthorized disassembly, repair or modication.
A Product will be considered to have a material defect or to be materially defective only if such Product does
not meet the stated design lifetime (up to the applicable Warranty Period), is returned to the appropriate
location within the Warranty Period, and is subject to applicable performance threshold information
contained in the Product's GIGABYTE data sheet.
The original purchaser must ensure to the extent possible that all data is removed from the Product, and if
it is not the case that all data is or can be removed, the original purchaser shall indemnify, defend and hold
harmless GIGABYTE and the Reseller for any possible liabilities associated with the potential presence
in the returned Product of sensitive and/or personal data, regardless of whether this data relates to the
original purchaser or any other third party.
It is possible for a drive to be used under conditions which cause the media to wear out (and the Warranty
to expire) prior to the expiration of the stated time period in the Warranty, as specied in the applicable
endurance specication linked below.
Please check for more details on the GIGABYTE Website.
https://www.gigabyte.com/
GIGABYTE shall not be liable for (a) any incidental, indirect, special, exemplary, punitive or consequential
damages, including but not limited to loss of prots and/or loss of data, other loss, damage or expense
directly or indirectly arising from any defect or inability to use the Product or poor performance, either
separately or in combination with other equipment, regardless of whether GIGABYTE or the original
purchaser has been advised of the possibility of such damages, nor (b) any amounts in the aggregate in
excess of the purchase price paid for the applicable Product(s). GIGABYTE is not liable for and does not
cover under warranty, any costs associated with servicing and/or the installation of GIGABYTE products,
including the Product.
This Warranty sets forth the entire liability and obligations of GIGABYTE with respect to defects, breach of
warranty or any other failure to perform or meet specication associated with any Products.
GIGABYTE Warranty Guidelines GIGABYTE products, including the Product, must not be used in
applications where failure could threaten injury or life, such as aviation, automotive, nuclear, medical or
life support systems (or any other form of ultra-hazardous applications), and under no circumstances shall
GIGABYTE offer any warranty or have any obligations arising from any such Product uses.
Buyer acknowledges that the goods sold by GIGABYTE are being used or incorporated into other products
or systems, and the ultimate safety of those products or systems are the sole responsibility of Buyer.
This warranty applies only on the condition that the product has been installed, maintained and operated
under conditions of normal use and in accordance with the installation guide provided herewith.
The provisions of this warranty shall not apply if, in GIGABYTE's sole judgment, the product has been
subject to misuse or neglect, improper installation, damaged in an accident, or repaired or altered in any
way that affects its performance or reliability.
Buyer assumes all risks and liabilities for use of GIGABYTE products in other products or systems. In
addition, GIGABYTE is not responsible for any archival, backup or disaster recovery services.
Disclaimer
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, TITLE, OR NON INFRINGEMENT, WHICH OTHER WARRANTIES ARE EXPRESSLY EXCLUDED
AND DISCLAIMED. GIGABYTE SHALL NOT BE LIABLE FOR LOSS OF PROFITS OR ANY SPECIAL,
INCIDENTAL, EXEMPLARY, CONSEQUENTIAL OR PUNITIVE DAMAGES WHICH PURCHASER OR
THIRD PARTY MAY SUSTAIN, EVEN IF GIGABYTE HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH LOSSES OR DAMAGES. IN NO EVENT SHALL GIGABYTE'S LIABILITY EXCEED THE PURCHASE
PRICE OF THE DEFECTIVE PRODUCT. WITHOUT LIMITING THE GENERALITY OF THE PRECEDING
PARAGRAPH, GIGABYTE EXPRESSLY DISCLAIMS ANY AND ALL LIABILITY FOR DIRECT, INDIRECT
AND/OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING FROM THE LOSS,
CORRUPTION, ERASURE OR DESTRUCTION OF ANY DATA STORED ON OR TRANSMITTED VIA ANY
GIGABYTE PRODUCT, INCLUDING, WITHOUT LIMITATION, THE INABILITY TO ACCESS DATA STORED
ON ANY SECURE GIGABYTE PRODUCTS THAT REQUIRE A USER-DESIGNATED PASSWORD OR
CODE IF THAT PASSWORD OR CODE IS LOST, FORGOTTEN, OR COMPROMISED. USERS HAVE THE
OBLIGATION TO BACKUP ALL DATA AND PASSWORDS OR CODES.
Solid State Drives (SSD) Quick Installation Guide
BSMI CNS15663 限用物質含有情況標示聲明書
Declaraon of the Presence Condion of the Restricted Substances Marking
設備名稱：2.5-inch SSD 型號（型式）： GP-UDPRO256G/
GP-UDPRO512G/
GP-UDPRO1T
Equipment name Type designaon (Type)
單元Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷電路板總成
PCB Assembly
晶片
Chip
外殻
Shell
連接器
Connectors
備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted
substance exceeds the reference percentage value of presence condion.
備考2. "○"係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: "○" indicates that the percentage content of the restricted substance does not exceed the percentage
of reference value of presence.
備考3. "－"係指該項限用物質為排除項目。
Note 3: The "－" indicates that the restricted substance corresponds to the exempon.
关于符合中国《电器电子产品有害物质限制使用管理办法》的声明
Administrave Measures for the Restricted Use of Hazardous Substances in Electrical and Electronic Products
(China RoHS Declaraon)
产品中有害物质的名称及含量
Hazardous Substances Table
部件名称(Parts)
有害物质(Hazardous Substances)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板总成
PCB Assembly × ○ ○ ○ ○ ○
芯片
Chip ○ ○ ○ ○ ○ ○
外壳
Shell ○ ○ ○ ○ ○ ○
连接器
Connectors ○ ○ ○ ○ ○ ○
These tables are prepared in accordance with the provisions of SJT 11364
本表格依据SJ/T 11364 的规定编制。
○： The content of such hazardous substance in all homogeneous materials of such component is below the
limit required by GB/T 26572.
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
×： The content of such hazardous substance in a certain homogeneous material of such component is
beyond the limit required by GB/T 26572.
表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
How to Install your SSD?
NOTE: Before you start, make sure the capacity of
the SSD is larger than the capacity of your old hard
disc drive. Otherwise, Data Cloning will fail.
Install in Desktop Computers
1. Unplug the computer from the power outlet.
2. Remove the computer chassis cover (please
refer to computer manual for instructions).
3. Connect the SATA and the Power cable from
the motherboard to SSD(see the motherboard
documentation for the placement of the cable
connectors).
4. Close the computer chassis and plug the
computer to the power outlet.
5. Turn on the computer.
English
Wie installiere ich meine SSD?
HINWEIS: Stellen Sie vor dem Start sicher, dass
die Kapazität der SSD größer ist als die Kapazität
Ihrer alten Festplatte. Andernfalls schlägt das
Data Cloning fehl.
Installieren auf Desktop-Computern
1. Ziehen Sie den Computer aus der Steckdose.
2. Entfernen Sie die Abdeckung des
Computergehäuses (Anweisungen hierzu
nden Sie im Computerhandbuch).
3. Bauen Sie die SSD in einen freien
Laufwerkschacht ein.
4. Schließen Sie das SATA Kabel an der SSD
und am Mainboard an. Schließen Sie ein SATA
Stromkabel an der SSD an. (siehe Mainboard-,
und Netzteil Dokumentation für die Platzierung
der Kabelstecker).
5. Schließen Sie das Computergehäuse und
schließen Sie den Computer an die Steckdose
an.
6. Schalten Sie den Computer ein.
Deutsch
SSD
SSD
1.
2. (
)
3. SATA
SSD (
)
4.
5.
¿Como instalar su SSD?
NOTA: Antes de empezar, asegúrese de que la
capcidad de su SSD sea mayor que la capacidad
de su disco duro anterior. De lo contrario, la
clonacion de datos fallará.
Instalar en Computadoras de Escritorio
1. Desconectar la computadora de la toma de
corriente.
2. Retirar la cubierta del chasis de la
computadora (consultar el manual de la
computadora para obtener instrucciones).
3. Conectar el cable SATA y el cable de
alimentación de la placa madre al SSD
(consultar la documentación de la placa madre
para la ubicación de los conectores de cable)
4. Cierre el chasis de la computadora y conecte
la computadora a la toma de corriente.
5. Encender la computadora.
Español
SSD
SSD
1.
2. (
)
3. SSD S ATA
SSD (
)
4.
5. SSD
Как подключить к системе SSD-накопитель?
ПРИМЕЧАНИЕ: Прежде, чем приступить к
инсталляции, убедитесь в том, что емкость
SSD-накопителя превышает емкость
вашего жесткого диска. В противном случае
процедура клонирования информации будет
невозможна.
Установка устройства в настольный ПК
1. Отключите питание компьютера.
2. Снимите боковую стенку корпуса
системного блока (пожалуйста,
ознакомьтесь с соответствующей
инструкцией).
3. Подключите интерфейсный SATA-
кабель к материнской плате, а затем к
SSD-накопителю, подключите кабель
питания к SSD-накопителю (ознакомьтесь
с документацией на материнскую плату,
чтобы определить месторасположение
указанных разъемов).
4. Верните боковую стенку корпуса на
прежнее место и подключите питание ПК.
5. Включите компьютер.
Русский
SSD 설치 방법
주의 : 제품 설치 전 구매한 SSD의 용량이
현재 사용중인 저장 장치의 용량보다 커야
합니다. 그렇지 않으면 데이터 클로닝(Data
Cloning) 작업을 수행할 수 없습니다.
PC에 SSD를 설치하는 경우
1. PC의 전원 케이블을 콘센트에서 제거하여
주십시오.
2. PC 케이스의 커버를 열어 주십시오. (PC
또는 케이스 매뉴얼 참고 요망)
3. SSD를 SATA 케이블과 Power 케이블을
이용하여 메인보드에 연결하십시오.
(각각의 케이블 커넥터는 메인보드 매뉴얼
참고 요망)
4. SSD의 설치가 완료가 되면, PC 케이스의
커버를 닫은 후 PC의 전원 케이블을
콘센트에 연결하여 주십시오.
5. PC의 전원을 켜 주십시오.
한국어
SSD
SSD
PC
1. PC
2. PC
3. SATA
SSD
4. PC PC
5. PC
Como instalar o seu SSD?
NOTA: Antes de começar, verique se a
capacidade do SSD é maior que a capacidade
da sua unidade de disco rígido antiga. Caso
contrário, a clonagem de dados falhará.
Instalar em computadores desktop
1. Desconecte o computador da tomada elétrica.
2. Remova a tampa do gabinete do computador
(consulte o manual do computador para obter
instruções)
3. Conecte o cabo SATA e o cabo de
alimentação da placa-mãe ao SSD (consulte a
documentação da placa-mãe para a colocação
dos conectores)
4. Feche o gabinete e conecte o computador à
tomada elétrica
5. Ligue o computador
Português
-
1
-
2
Gigabyte UD PRO SSD 256GB インストールガイド
- タイプ
- インストールガイド
- このマニュアルも適しています
他の言語で
関連論文
-
Gigabyte SSD 120GB 取扱説明書
-
-
-
-
-
-
-
-
-