MSI 7C89 取扱説明書

1

󷸺󳜼 Contents

Contents

2

3

 7

LAN Port LED Status Table ........................................................................................7

8

CPU Socket .................................................................................................................9

DIMM Slots................................................................................................................10

M2_1~2: M.2 Slots ...................................................................................................10

PCI_E1~2: PCIe Expansion Slots ..............................................................................11

SATA1~4: SATA 6Gb/s Connectors ...........................................................................11

JFP1, JFP2: Front Panel Connectors .......................................................................12

JAUD1: Front Audio Connector ................................................................................12

ATX_PWR1, CPU_PWR1: Power Connectors ...........................................................13

JUSB1: USB 2.0 Connector ......................................................................................14

JUSB2: USB 3.2 Gen 1 5Gbps Connector .................................................................14

CPU_FAN1, SYS_FAN1: Fan Connectors .................................................................15

JTPM1: TPM Module Connector ...............................................................................15

JCI1: Chassis Intrusion Connector ...........................................................................16

JCOM1: Serial Port Connector .................................................................................16

JBAT1: Clear CMOS (Reset BIOS) Jumper ...............................................................17

EZ Debug LED ...........................................................................................................17

JRGB1: RGB LED connector (H410M PRO) ..............................................................18

JRAINBOW1: Addressable RGB LED connector (H410M PRO) ...............................18

19

BIOS Setup ................................................................................................................20

Entering BIOS Setup .................................................................................................20

Resetting BIOS ..........................................................................................................20

Updating BIOS...........................................................................................................21

22

Installing Windows

®

10..............................................................................................22

Installing Drivers ......................................................................................................22

Installing Utilities .....................................................................................................22

Thank you for purchasing the MSI

®



motherboard. This User Guide gives

information about board layout, component overview, BIOS

setup and software installation.

2



 The components included in this package are prone to damage from electrostatic

discharge (ESD). Please adhere to the following instructions to ensure successful

computer assembly.

 Ensure that all components are securely connected. Loose connections may cause

the computer to not recognize a component or fail to start.

 Hold the motherboard by the edges to avoid touching sensitive components.

 It is recommended to wear an electrostatic discharge (ESD) wrist strap when

handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is

not available, discharge yourself of static electricity by touching another metal object

before handling the motherboard.

 Store the motherboard in an electrostatic shielding container or on an anti-static

pad whenever the motherboard is not installed.

 Before turning on the computer, ensure that there are no loose screws or metal

components on the motherboard or anywhere within the computer case.

 Do not boot the computer before installation is completed. This could cause

permanent damage to the components as well as injury to the user.

 If you need help during any installation step, please consult a certified computer

technician.

 Always turn off the power supply and unplug the power cord from the power outlet

before installing or removing any computer component.

 Keep this user guide for future reference.

 Keep this motherboard away from humidity.

 Make sure that your electrical outlet provides the same voltage as is indicated on

the PSU, before connecting the PSU to the electrical outlet.

 Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

 All cautions and warnings on the motherboard should be noted.

 If any of the following situations arises, get the motherboard checked by service

personnel:

 Liquid has penetrated into the computer.

 The motherboard has been exposed to moisture.

 The motherboard does not work well or you can not get it work according to

user guide.

 The motherboard has been dropped and damaged.

 The motherboard has obvious sign of breakage.

 Do not leave this motherboard in an environment above 60°C (140°F), it may

damage the motherboard.

3

 





Supports 10th Gen Intel® Core™ and Pentium® Gold / Celeron®

processors for LGA 1200 socket*

* Please go to www.intel.com for more compatibility

information.

* Onboard graphics output are disabled when using F SKU

processors.

 Intel®

H410 chipset



 2x DDR4 memory slots, support up to 64GB*

 Intel® Core™ i7/ i9

 Supports up to DDR4 2933 MHz

 Intel® Core™ i5 and below

 Supports up to DDR4 2666 MHz

 Supports Dual-Channel mode

 Supports non-ECC, un-buffered memory

 Supports Intel® Extreme Memory Profile (XMP)

* Please refer www.msi.com for more information on

compatible memory.



 1x PCIe 3.0 x16 slot (From CPU)

 1x PCIe 3.0 x1 slot (From PCH)

 1x M.2 slot with E key for WiFi module only





 1x VGA port, supports a maximum resolution of 2048x1536

@50Hz, 2048x1280 @60Hz, 1920x1200 @60Hz (H410M PRO &

H410M PRO-VH)

 1x DVI-D port, supports a maximum resolution of 1920x1200

@60Hz (H410M PRO & H410M-A PRO)

 1x HDMI™ 1.4 port, supports a maximum resolution of

4096x2160 @30Hz



Realtek® ALC892/ ALC897 Codec

 7.1-Channel High Definition Audio

 1x Intel® I219V Gigabit LAN controller

Continued on next page

4



Continued from previous page



Intel® H410 Chipset

 4x SATA 6Gb/s ports*

 1x M.2 slot (Key M)

 M2_1 supports up to PCIe 3.0 x4 and SATA 6Gb/s, 2242/

2260/ 2280 storage devices*

* SATA4 will be unavailable when installing M.2 SATA SSD in

the M.2 slot.



Intel® H410 Chipset

 4x USB 3.2 Gen 1 5Gbps ports (2 Type-A ports on the back

panel, 2 ports available through the internal USB 3.2 Gen 1

5Gbps connector)

 6x USB 2.0 ports (4 Type-A ports on the back panel, 2 ports

available through the internal USB 2.0 connector)





 1x 24-pin ATX main power connector

 1x 8-pin ATX 12V power connector

 4x SATA 6Gb/s connectors

 1x USB 2.0 connector (supports additional 2 USB 2.0 ports)

 1x USB 3.2 Gen1 5Gbps connector (supports additional 2

USB 3.2 Gen1 5Gbps ports)

 1x 4-pin CPU fan connector

 1x 4-pin system fan connector

 1x Front panel audio connector

 2x Front panel connectors

 1x Serial port connector

 1x TPM module connector

 1x Chassis Intrusion connector

 1x Clear CMOS jumper

 1x 4-pin RGB LED connector (H410M PRO)

 1x 3-pin RAINBOW LED connector (H410M PRO)

 4x EZ Debug LED

Continued on next page

5

 

Continued from previous page





 1x VGA port (H410M PRO & H410M PRO-VH)

 1x DVI-D port (H410M PRO & H410M-A PRO)

 1x HDMI port

 2x USB 3.2 Gen1 5Gbps Type-A ports

 1x PS/2 keyboard/ mouse combo port

 4x USB 2.0 Type-A ports

 1x LAN (RJ45) port

 3x audio jacks

 NUVOTON NCT5887D Controller Chip





 CPU/System temperature detection

 CPU/System fan speed detection

 CPU/System fan speed control



 Micro-ATX Form Factor

 9.3 in. x 7.5 in. (23.6 cm x 19.0 cm)



 1x 128 Mb flash

 UEFI AMI BIOS

 Multi-language



 Drivers

 DRAGON CENTER

 CPU-Z MSI GAMING

 Intel® Extreme Tuning Utility

 Google Chrome™, Google Toolbar, Google Drive

 Norton™ Internet Security Solution

Continued on next page

6



Continued from previous page





 LAN Manager

 Mystic Light (H410M PRO)

 User Scenario

 Hardware Monitor

 True Color

 Live Update

 DPC Latency Tuner

 Speed Up

 Smart Tool

 Super Charger

Please refer to http://

download.msi.com/manual/

mb/DRAGONCENTER2.pdf for

more details.

7

 





 

Off No link

Yellow Linked

Blinking Data activity



 

Off 10 Mbps connection

Green 100 Mbps connection

Orange 1 Gbps connection



PS/2 Mouse/

Keyboard

LAN

USB 2.0 Type-A

USB 3.2 Gen 1

5Gbps Type-A

Mic-in

Line-in

Line-out



To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1

connector and follow the below steps.

 Click on the  to open the dialog

below.

 Select .

 Plug your speakers to audio jacks on rear and front I/O panel. When you plug into

a device at an audio jack, a dialogue window will pop up asking you which device

is current connected.

(H410M PRO &

H410M PRO-VH)

VGA

DVI-D

(H410M PRO &

H410M-A PRO)

8



JCOM1

* Distance from the center of the CPU to the nearest DIMM slot.

SYS_FAN1

CPU_FAN1

CPU Socket

JARINBOW1

(H410M PRO)

M2_2

PCI_E2

PCI_E1

JBAT1

DIMMA1

DIMMB1

JTPM1

M2_1

SATA3

SATA4

SATA2

SATA1

JAUD1

ATX_PWR1

CPU_PWR1

JUSB2

JCI1

JUSB1

JFP2

JFP1

JRGB1

(H410M PRO)

50.89mm*

9

 



Please install the CPU into the CPU socket as shown below.







Always unplug the power cord from the power outlet before installing or removing

the CPU.



Please retain the CPU protective cap after installing the processor. MSI will deal

with Return Merchandise Authorization (RMA) requests if only the motherboard

comes with the protective cap on the CPU socket.



When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink

is necessary to prevent overheating and maintain system stability.





your system.



Overheating can seriously damage the CPU and motherboard. Always make sure

the cooling fans work properly to protect the CPU from overheating. Be sure to apply

an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to

enhance heat dissipation.



Whenever the CPU is not installed, always protect the CPU socket pins by covering

the socket with the plastic cap.



If you purchased a separate CPU and heatsink/ cooler, Please refer to the docu-

mentation in the heatsink/ cooler package for more details about installation.

1

4

6

5

7

8

9

3

2

10





Please install the memory module into the DIMM slot as shown below.







Always insert memory modules in the 



To ensure system stability for Dual channel mode, memory modules must be of the

same type, number and density.



Some memory modules may operate at a lower frequency than the marked value

when overclocking due to the memory frequency operates dependent on its Serial



frequency if you want to operate the memory at the marked or at a higher frequency.



󼶮

installation or overclocking.



The stability and compatibility of installed memory module depend on installed

CPU and devices when overclocking.



Please refer www.msi.com for more information on compatible memory.

1

2

3

2



Please install the M.2 device into the M.2 slot as shown below.

1

3

Standoff

Supplied

M.2 screw

30º30º

2

11

 









󼶫

unplug the power supply power cable from the power outlet. Read the expansion

card’s documentation to check for any necessary additional hardware or software

changes.



If you install a large and heavy graphics card, you need to use a tool such as 

 to support its weight to prevent deformation

of the slot.

: PCIe 3.0 x16 slot (CPU lanes)

: PCIe 3.0 x1 slot (PCH lanes)



These connectors are SATA 6Gb/s interface ports. Each connector can connect to one

SATA device.

SATA3

SATA4

SATA1

SATA2







Please do not fold the SATA cable at a 90-degree angle. Data loss may result

during transmission otherwise.



SATA cables have identical plugs on either sides of the cable. However, it is



saving purposes.



SATA4 will be unavailable when installing M.2 SATA SSD in the M.2 slot.

12





These connectors connect to the switches and LEDs on the front panel.

1

2 10

9

+

+-

--

-

+

Power LED

HDD LED Reset Switch

Reserved

Power Switch

1 HDD LED + 2 Power LED +

3 HDD LED - 4 Power LED -

5 Reset Switch 6 Power Switch

7 Reset Switch 8 Power Switch

9 Reserved 10 No Pin

JFP2

1

+

-

Speaker

Buzzer

1 Speaker - 2 Buzzer +

3 Buzzer - 4 Speaker +

HDD LED

RESET SW

HDD LED

HDD LED -

HDD LED +

POWER LED -

POWER LED +

POWER LED

JFP1



This connector allow you to connect audio jacks on the front panel.

1

2 10

9

1 MIC L 2 Ground

3 MIC R 4 NC

5 Head Phone R 6 MIC Detection

7 SENSE_SEND 8 No Pin

9 Head Phone L 10 Head Phone Detection

13

 



These connectors allow you to connect an ATX power supply.





Make sure that all the power cables are securely connected to a proper ATX power

supply to ensure stable operation of the motherboard.

24

131

12

ATX_PWR1

1 +3.3V 13 +3.3V

2 +3.3V 14 -12V

3 Ground 15 Ground

4 +5V 16 PS-ON#

5 Ground 17 Ground

6 +5V 18 Ground

7 Ground 19 Ground

8 PWR OK 20 Res

9 5VSB 21 +5V

10 +12V 22 +5V

11 +12V 23 +5V

12 +3.3V 24 Ground

5

4

1

8

CPU_PWR1

1 Ground 5 +12V

2 Ground 6 +12V

3 Ground 7 +12V

4 Ground 8 +12V

14





This connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.

1

10 11

20

1 Power 11 USB2.0+

2 USB3_RX_DN 12 USB2.0-

3 USB3_RX_DP 13 Ground

4 Ground 14 USB3_TX_C_DP

5 USB3_TX_C_DN 15 USB3_TX_C_DN

6 USB3_TX_C_DP 16 Ground

7 Ground 17 USB3_RX_DP

8 USB2.0- 18 USB3_RX_DN

9 USB2.0+ 19 Power

10 Ground 20 No Pin





Note that the Power and Ground pins must be connected correctly to avoid possible

damage.



These connectors allow you to connect USB 2.0 ports on the front panel.







Note that the VCC and Ground pins must be connected correctly to avoid possible

damage.



In order to recharge your iPad,iPhone and iPod through USB ports, please install

MSI® DRAGON CENTER utility.

1

2 10

9

1 VCC 2 VCC

3 USB0- 4 USB1-

5 USB0+ 6 USB1+

7 Ground 8 Ground

9 No Pin 10 NC

15

 





You can adjust fan speed in 



PWM Mode fan connectors provide constant 12V output and adjust fan speed with

speed control signal. When you plug a 3-pin (Non-PWM) fan to a fan connector in

PWM mode, the fan speed will always maintain at 100%, which might create a lot of

noise.

1



1 Ground 2 +12V

3 Sense 4 Speed Control Signal













CPU_FAN1 PWM mode 1A 12W

SYS_FAN1 DC mode 1A 12W

1



1 Ground 2 Voltage Control

3 Sense 4 NC

1

2

12

11

1 SPI Power 2 SPI Chip Select

3

Master In Slave Out (SPI

Data)

4

Master In Slave In (SPI

Data)

5 Reserved 6 SPI Clock

7 Ground 8 SPI Reset

9 Reserved 10 No Pin

11 Reserved 12 Interrupt Request



This connector is for TPM (Trusted Platform Module). Please refer to the TPM

security platform manual for more details and usages.

16





This connector allows you to connect the chassis intrusion switch cable.

Normal

(default)

Trigger the chassis

intrusion event



 Connect the  connector to the chassis intrusion switch/ sensor on the

chassis.

 Close the chassis cover.

 Go to .

 Set  to .

 Press F10 to save and exit and then press the  key to select .

 Once the chassis cover is opened again, a warning message will be displayed on

screen when the computer is turned on.



 Go to .

 Set  to Reset.

 Press to save and exit and then press the  key to select .



This connector allows you to connect the optional serial port with bracket.

1

2 10

9

1 DCD 2 SIN

3 SOUT 4 DTR

5 Ground 6 DSR

7 RTS 8 CTS

9 RI 10 No Pin

17

 



There is CMOS memory onboard that is external powered from a battery located on

the motherboard to save system configuration data. If you want to clear the system

configuration, set the jumpers to clear the CMOS memory.

Keep Data

(default)

Clear CMOS/ Reset

BIOS



 Power off the computer and unplug the power cord.

 Use a jumper cap to short JBAT1 for about 5-10 seconds.

 Remove the jumper cap from JBAT1.

 Plug the power cord and power on the computer.



These LEDs indicate the status of the motherboard.

 - indicates CPU is not detected or fail.

 - indicates DRAM is not detected or fail.

 - indicates GPU is not detected or fail.

 - indicates booting device is not detected or fail.

18





The JRGB connector allows you to connect the 5050 RGB LED strips 12V.







The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips

(12V/G/R/B) with the maximum power rating of 3A (12V).



󼶫

before installing or removing the RGB LED strip.



Please use MSI’s software to control the extended LED strip.



The JRAINBOW connector allows you to connect the WS2812B Individually

Addressable RGB LED strips 5V.





Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW

connector provide different voltages, and connecting the 5V LED strip to the JRGB

connector will result in damage to the LED strip.







The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Address-

able RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In

the case of 20% brightness, the connector supports up to 200 LEDs.



󼶫

before installing or removing the RGB LED strip.



Please use MSI’s software to control the extended LED strip.

1

1 +12V 2 G

3 R 4 B

1

1 +5V 2 Data

3 No Pin 4 Ground

19

 



MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface)

architecture. UEFI has many new functions and advantages that traditional BIOS

cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI

BIOS uses UEFI as the default boot mode to take full advantage of the new chipset’s

capabilities. However, it still has a CSM (Compatibility Support Module) mode to be

compatible with older devices. That allows you to replace legacy devices with UEFI

compatible devices during the transition.





The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted.



 Fast booting - UEFI can directly boot the operating system and save the BIOS self-

test process. And also eliminates the time to switch to CSM mode during POST.

 Supports for hard drive partitions larger than 2 TB.

 Supports more than 4 primary partitions with a GUID Partition Table (GPT).

 Supports unlimited number of partitions.

 Supports full capabilities of new devices - new devices may not provide backward

compatibility.

 Supports secure startup - UEFI can check the validity of the operating system to

ensure that no malware tampers with the startup process.



 - this motherboard supports only 64-bit

Windows 10 operating system.

  - the system will detect your graphics card. When display a

warning message 







We recommend that you to use a GOP/ UEFI compatible graphics card.



After entering the BIOS, find the BIOS Mode at the top of the screen.

 



















CSM

20





The default settings offer the optimal performance for system stability in normal

conditions. You should  to avoid possible system

damage or failure booting unless you are familiar with BIOS.







BIOS items are continuous update for better system performance. Therefore, the

󼶫

reference only. You could also refer to the  information panel for BIOS item

description.



The BIOS items will vary with the processor.



Press  key, when the

 message appears on the screen during the boot process.



F1: General Help

F2: Add/ Remove a favorite item

F3: Enter Favorites menu

F4: Enter CPU Specifications menu

F5: Enter Memory-Z menu

F6: Load optimized defaults

F7: Switch between Advanced mode and EZ mode

F8: Load Overclocking Profile

F9: Save Overclocking Profile

F10: Save Change and Reset*

F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only).

: Enter Search page

* When you press F10, a confirmation window appears and it provides the

modification information. Select between Yes or No to confirm your choice.



You might need to restore the default BIOS setting to solve certain problems. There

are several ways to reset BIOS:

 Go to BIOS and press F6 to load optimized defaults.

 Short the  jumper on the motherboard.





Please refer to the jumper section for resetting BIOS.

ページが読み込まれています...

MSI 7C89 取扱説明書

このマニュアルも適しています

MSI 7C89 取扱説明書

他の言語で

関連論文

その他のドキュメント