Philips 257E7QDSB/11 ユーザーマニュアル

  • こんにちは!Philips 257E7QS/QDSモニターのユーザーマニュアルについてご質問にお答えします。このマニュアルには、モニターのセットアップ、画像の最適化、トラブルシューティング、MHL機能の使い方など、様々な情報が含まれています。どのようなご質問でもお気軽にご相談ください!
  • モニター取り付け時に「このビデオモードを表示できません」というメッセージが表示された場合、どうすれば良いですか?
    電源LEDが点灯しない場合、どうすれば良いですか?
    画像が画面中央に表示されない場合、どうすれば良いですか?
    画像が揺れる、またはフリッカーする場合はどうすれば良いですか?
www.philips.com/welcome
257E7
JA 1
23
& FAQ 28
1. ...................................................1
1.1
...................................................1
1.2 ......................................................2
1.3 ...........................3
2. ............4
2.1 .............................................................4
2.2 .......................................5
2.3
MHL (
) ..........................................8
3. .................................9
3.1 SmartImage Lite ..............................................9
3.2 SmartContrast ..............................................10
4. ........................................11
4.1 ................. 13
5. ........................................14
6. ........................................15
7. ............23
7.1 Philips
...................................23
7.2 ....................25
8. & FAQ .28
8.1 .......................28
8.2
FAQ ......................................................... 29
8.3 MHL FAQ ........................................................31
1
1. 重要
1.
Philips
Philips
1.1
DC
6 DC
AC
AC/DC
LCD
LCD
2
1. 重要
: 0 40 C
: 20 80% RH
/
LCD
(
)
/
1.2
3
1. 重要
1.3
-WEEE
This marking on the product or on its
packaging illustrates that, under European
Directive 2012/19/EU governing used electrical
and electronic appliances, this product may
not be disposed of with normal household
waste. You are responsible for disposal of
this equipment through a designated waste
electrical and electronic equipment collection.
To determine the locations for dropping off
such waste electrical and electronic, contact
your local government office, the waste disposal
organization that serves your household or the
store at which you purchased the product.
Your new monitor contains materials that can
be recycled and reused. Specialized companies
can recycle your product to increase the
amount of reusable materials and to minimize
the amount to be disposed of.
All redundant packing material has been
omitted. We have done our utmost to make the
packaging easily separable into mono materials.
Please find out about the local regulations on
how to dispose of your old monitor and packing
from your sales representative.
Taking back/Recycling Information for
Customers
Philips establishes technically and economically
viable objectives to optimize the environmental
performance of the organization's product,
service and activities.
From the planning, design and production
stages, Philips emphasizes the important of
making products that can easily be recycled. At
Philips, end-of-life management primarily entails
participation in national take-back initiatives
and recycling programs whenever possible,
preferably in cooperation with competitors,
which recycle all materials (products and related
packaging material) in accordance with all
Environmental Laws and taking back program
with the contractor company.
Your display is manufactured with high quality
materials and components which can be
recycled and reused.
To learn more about our recycling
program please visit:
http://www.philips.
com/sites/philipsglobal/about/sustainability/
ourenvironment/ourrecyclingprogram.page
4
2. モニタをセットアップする
2.
2.1
257E7
©
2
0
1
5
K
o
n
i
n
k
l
i
j
k
e
P
h
i
l
i
p
s
N
.
V
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
U
n
a
u
t
h
o
r
i
z
e
d
d
u
p
l
i
c
a
t
i
o
n
i
s
a
v
i
o
l
a
t
i
o
n
o
f
a
p
p
l
i
c
a
b
l
e
l
a
w
s
.
M
a
d
e
a
n
d
p
r
i
n
t
e
d
i
n
C
h
i
n
a
.
V
e
r
s
i
o
n
Philips and the Philips’ Shield Emblem are registered trademarks of
Koninklijke Philips N.V. and are used under license from Koninklijke
Philips N.V.
Monitor drivers
User’s Manual
使用
前请阅读使用说明
保留备用
* AC/DC
* VGA
* AC/DC
* DVI
* HDMI (257E7QDS)
*
AC/DC
Philips ADPC1945(257E7QDS)
Philips ADPC1936(257E7QS)
1.
(1)
(2)
2
1
5
2. モニタをセットアップする
PC
257E7QS:
1
2
1
2
3
4
3
AC/DC
VGA
DVI
Kensington
257E7QDS
1
2
3
1
3
2
4
6
5
4
5
AC/DC
HDMI
VGA
DVI
HDMI MHL
Kensington
PC
1.
2.
3.
4.
5.
2.2
3
OSD
257E7QS:
257E7QDS:
OSD
OSD
SmartImage Lite. 3
Standard
( ) Internet (
) Game ( )
OSD
6
2. モニタをセットアップする
(OSD)
(OSD)
Philips LCD
257E7QS:






257E7QDS:








Philips OSD
OSD
Main menu Sub menu
画像
OSD設定
設定
言語
音声
(available for
selective models)
入力
写真フォーマット
輝度
コントラスト
水平
垂直
透明
OSDタイムアウト
H.位置
自動調整
V.位置
位相
クロック
解像度の通知
リセット
情報
English, Deutsch, Español, Ελληνική, Français,
Italiano, MaryarNederlands, Português,
Português do BrasilPolskiРусский ,Svenska
SuomiTürkçeČeštinaУкраїнська, 简体中文,
中文,日本語,한국어
色温度
sRGB
ユーザー定義
ミュート
VGA
DVI
MHL-HDMI (available for selective models)
SmartResponse
SmartContrast
Gamma
Over Scan
(available for selective models)
Pixel Orbiting
ボリューム
ワイドスクリーン, 4:3
0~100
0~100
0~100
0~100
オフ, 1, 2, 3, 4
5s, 10s, 20s, 30s, 60s
0~100
オン, オフ
はい, いいえ
0~100
0~100
0~100
6500K, 9300K
赤色: 0~100
0~100
緑色: 0~100
青色: 0~100
オフ, 高速, より高速,
最高速
オン, オフ
1.8, 2.0, 2.2, 2.4, 2.6
オン, オフ
オン, オフ
オン, オフ
7
2. モニタをセットアップする
1920 1080@60Hz
Use
1920 1080@60Hz for best results(1920
1080@60Hz )
OSD (
) Setup(
)
OSD (
)
Setup ( )
20
8
2. モニタをセットアップする
2.3 MHL (
)
MHL
(MHL)
/
MHL MHL
Philips
MHL
HD
MHL
?
MHL MHL
MHL
MHL Web (http://www.mhlconsortium.
org)
MHL
? (
?)
MHL
USB
[MHL-HDMI]
MHL
MHL
MHL
[MHL-HDMI]
MHL
MHL
MHL HDMI
MHL
MHL-
HDMI
ErP / MHL
Philips MHL
MHL
MHL
FAQ
MHL
MHL
Philips
9
3. 画像の最適化
3 Standard ( ) Internet (
)Game ( )





Standard (標準 )
PDF
Internet (インターネット)
Game ( ゲーム)
3. 画像の最適化
3.1 SmartImage Lite
これは何ですか?
SmartImage Lite
Philips SmartImage Lite
必要な理由は?
SmartImage Lite
これは、どのように作動するのですか?
SmartImage Lite
Philips
SmartImage
Lite
1
SmartImage Lite はどのようにして有効にする
のですか ?
1. SmartImage
2.
3. SmartImage 5
10
3. 画像の最適化
3.2 SmartContrast
これは何ですか?
LCD
必要な理由は?
SmartContrast
これは、どのように作動するのですか?
SmartContrast
11
4. 技術仕様
4. 技術仕様
/
AH-IPS LCD
W-LED
25
" (
63.326 cm
)
16:9
0.288 x 0.28578 mm
( ) 250 cd/m²
SmartContrast 20,000,000:1
( ) 1000:1
( ) 14ms(GtG)
SmartResponse ( ) 5ms(GtG)
1920x1080 @ 60Hz
( ) 178º (H) / 178º (V) @ C/R > 10
SmartImage Lite
1670
56Hz - 76Hz
30kHz - 83kHz
MHL 1080P@30Hz
(257E7QDS)
sRGB
257E7QS: VGA ( )DVI ( HDCP)
257E7QDS: VGA ( )DVI ( HDCP)
MHL-HDMI ( HDCP)
HDMI (257E7QDS)
OSD
VESA (100 100mm)Kensington
DDC/CIsRGBWindows 8.1/8/7 Mac OSX
-5º / +20º
257E7QS:
29.49W ()30.77W ( )
257E7QDS:
29.74W ( )38.04W ( )
( ) 0.5W
( ) 0.3W
12
4. 技術仕様
LED / ( )
AC 100-240VAC50-60Hz
( )
( x x )
577 x 436 x 213 mm
( )
( x x )
577 x 346 x 49 mm
( )
3.73 kg
( )
3.48 kg
( ) 0ºC 40ºC
( ) -20ºC 60ºC
20% 80%
ROHS
EPEAT (www.epeat.net)
100%
100% PVC BFR
CE Mark
FCC Class B
VCCI CLASS B
RCM
CCC
CECP
CU
SASO
KUCAS
ETL
ISO9241-307
EPA
WEEE
PSB
TCO Certied
1. EPEAT Philips
www.epeat.net
2.
www.philips.com/support
3. GtG GtG(BW)
13
4. 技術仕様
4.1
1920x1080@60Hz ( )
1920x1080@60Hz ( )
1920x1080@60Hz ( )
(kHz)
(Hz)
31.47 720x400 70.09
31.47 640x480 59.94
35.00 640x480 66.67
37.86 640x480 72.81
37.50 640x480 75.00
37.88 800x600 60.32
46.88 800x600 75.00
48.36 1024x768 60.00
60.02 1024x768 75.03
63.89 1280x1024 60.02
79.98 1280x1024 75.03
55.94 1440x900 59.89
70.64 1440x900 74.98
65.29 1680x1050 59.95
67.50 1920x1080 60.00
1920x1080@60Hz
14
5. 電源管理
5.
PC VESA DPM
257E7QS:
VESA
LED
29.49 W ( )
30.77 W ( )
0.5 W ( ) ( )
- - 0.3 W ( )
257E7QDS:
VESA
LED
29.74 W ( )
38.04 W ( )
0.5 W ( ) ( )
- - 0.3 W ( )
1920x1080
50%
250 nits
6500k (
)
15
6. 規制情報
6. 規制情報
Congratulations!
This product is designed for both you and the
planet!
TCO Development works for
sustainable IT - manufacture, use and
recycling of IT products reflecting
environmental, social and economic
responsibility.
TCO Certified is a third party verified program,
where every product model is tested by an
accredited impartial test laboratory. TCO Certified
represents one of the toughest certifications for
ICT products worldwide.
Some of the Usability features of TCO
Certified Displays:
Visual Ergonomics for image quality is tested
to ensure top performance and reduce sight
and strain problems. Important parameters
are Resolution, Luminance, Contrast, Reflection
and Colour characteristics
Products are tested according to rigorous
safety standards at impartial laboratories
Electric and magnetic fields emissions as low
as normal household background levels
Workload ergonomics to ensure a good
physical environment
Some of the Environmental features of TCO
Certified Displays:
Production facilities have an Environmental
Management System (EMAS or ISO 14001)
Low energy consumption to minimize climate
impact
Restrictions on Chlorinated and Brominated
flame retardants, plasticizers, plastics and heavy
metals such as cadmium, mercury and lead
(RoHS compliance)
Both product and product packaging is
prepared for recycling
The brand owner offers take-back options
Corporate Social Responsibility
The brand owner demonstrates the product
is manufactured under working practices that
promote good labour relations and working
conditions.
The Criteria Document can be downloaded from
our web site. The criteria included in this label have
been developed by TCO Development in co-
operation with scientists, experts, users as well as
manufacturers all over the world. Since the end of
the 1980s TCO has been involved in influencing
the development of IT equipment in a more user
and environmentally friendly direction. Our ICT
product labeling system began in 1992 and is now
requested by users and ICT-manufacturers all over
the world.
For displays with glossy bezels, the user should
consider the placement of the display as the bezel
may cause disturbing reflections from surrounding
light and bright surfaces.
For more information, please visit:
www.tcodevelopment.com
Technology for you and the planet
(Only for selective models)
User dene mode is used for TCO Certied
compliance.
16
6. 規制情報
Lead-free Product
Lead free display promotes
environmentally sound recovery and
disposal of waste from electrical and
electronic equipment. Toxic substances
like Lead has been eliminated and
compliance with European communitys
stringent RoHs directive mandating restrictions on
hazardous substances in electrical and electronic
equipment have been adhered to in order to make
Philips monitors safe to use throughout its life
cycle.
EPEAT
(www.epeat.net)
The EPEAT (Electronic Product
Environmental Assessment
Tool) program evaluates
computer desktops, laptops,
and monitors based on
51 environmental criteria developed through
an extensive stakeholder consensus process
supported by US EPA.
EPEAT system helps purchasers in the public
and private sectors evaluate, compare and select
desktop computers, notebooks and monitors
based on their environmental attributes. EPEAT
also provides a clear and consistent set of
performance criteria for the design of products,
and provides an opportunity for manufacturers to
secure market recognition for efforts to reduce
the environmental impact of its products.
Benefits of EPEAT
Reduce use of primary materials
Reduce use of toxic materials
Avoid the disposal of hazardous waste EPEAT
S requirement that all registered products meet
ENERGY STARs energy efficiency specifications,
means that these products will consume less
energy throughout their life.
CE Declaration of Conformity
This product is in conformity with the following
standards
EN60950-1:2006+A11:2009+A1:
2010+A12:2011+A2:2013(Safety requirement
of Information Technology Equipment).
EN55022:2010(Radio Disturbance
requirement of Information Technology
Equipment).
EN55024:2010 (Immunity requirement of
Information Technology Equipment).
EN61000-3-2:2006+A1:2009+A2:2009
(Limits for Harmonic Current Emission).
EN61000-3-3:2008 (Limitation of Voltage
Fluctuation and Flicker) following provisions of
directives applicable.
2006/95/EC (Low Voltage Directive).
2004/108/EC (EMC Directive).
2009/125/EC (ErP Directive, EC No.
1275/2008 Implementing Directive for
Standby and Off mode power consumption)
And is produced by a manufacturing organization
on ISO9000 level.
ISO9241-307:2008 (Ergonomic requirement,
Analysis and compliance test methods for
electronic visual displays).
GS EK1-2000:2011 (GS mark requirement).
prEN50279:1998 (Low Frequency Electric and
Magnetic fields for Visual Display).
MPR-II (MPR:1990:8/1990:10 Low Frequency
Electric and Magnetic fields).
TCO CERTIFIED (Requirement for
Environment Labeling of Ergonomics,
Energy, Ecology and Emission, TCO: Swedish
Confederation of Professional Employees) for
TCO versions.
17
6. 規制情報
Energy Star Declaration
(www.energystar.gov)
As an ENERGY STAR
®
Partner, we
have determined that this product
meets the ENERGY STAR
®
guidelines
for energy efficiency.
Note
We recommend you switch off the monitor
when it is not in use for a long time.
Federal Communications Commission (FCC)
Notice (U.S. Only)
This equipment has been tested and found
to comply with the limits for a Class B
digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician for help.
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Use only RF shielded cable that was supplied with
the monitor when connecting this monitor to a
computer device.
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to rain
or excessive moisture.
THIS CLASS B DIGITAL APPARATUS MEETS
ALL REQUIREMENTS OF THE CANADIAN
INTERFERENCE-CAUSING EQUIPMENT
REGULATIONS.
FCC Declaration of Conformity
Declaration of Conformity for Products Marked
with FCC Logo,
United States Only
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Commission Federale de la Communication
(FCC Declaration)
Cet équipement a été testé et déclaré
conforme auxlimites des appareils numériques
de class B,aux termes de l'article 15 Des
règles de la FCC. Ces limites sont conçues
de façon à fourir une protection raisonnable
contre les interférences nuisibles dans
le cadre d'une installation résidentielle.
CET appareil produit, utilise et peut émettre
des hyperfréquences qui, si l'appareil n'est
pas installé et utilisé selon les consignes
données, peuvent causer des interférences
nuisibles aux communications radio.
Cependant, rien ne peut garantir l'absence
d'interférences dans le cadre d'une installation
particulière. Si cet appareil est la cause
d'interférences nuisibles pour la réception des
signaux de radio ou de télévision, ce qui peut
être décelé en fermant l'équipement, puis en
le remettant en fonction, l'utilisateur pourrait
essayer de corriger la situation en prenant les
mesures suivantes:
18
6. 規制情報
Réorienter ou déplacer lantenne de
réception.
Augmenter la distance entre léquipement
et le récepteur.
Brancher léquipement sur un autre circuit
que celui utilisé par le récepteur.
Demander laide du marchand ou dun
technicien chevronné en radio/télévision.
Toutes modifications n'ayant pas reçu
l'approbation des services compétents
en matière de conformité est susceptible
d'interdire à l'utilisateur l'usage du présent
équipement.
N'utiliser que des câbles RF armés pour les
connections avec des ordinateurs ou périphériques.
CET APPAREIL NUMERIQUE DE LA CLASSE
B RESPECTE TOUTES LES EXIGENCES DU
REGLEMENT SUR LE MATERIEL BROUILLEUR
DU CANADA.
EN 55022 Compliance (Czech Republic Only)
Polish Center for Testing and Certification
Notice
The equipment should draw power from a socket
with an attached protection circuit (a three-
prong socket). All equipment that works together
(computer, monitor, printer, and so on) should have
the same power supply source.
The phasing conductor of the room's electrical
installation should have a reserve short-circuit
protection device in the form of a fuse with a
nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power
supply cable must be removed from the power
supply socket, which should be located near the
equipment and easily accessible.
A protection mark "B" confirms that the
equipment is in compliance with the protection
usage requirements of standards PN-93/T-42107
and PN-89/E-06251.
/