Gigabyte P37X V6 取扱説明書

English

1

English

PB Congratulations on your purchase of the GIGABYTE Notebook.

This manual will help you to get started with setting up your notebook. The final product

conguration depends on the model at the point of your purchase. GIGABYTE reserves the

right to amend without prior notice. For more detailed information, please visit our website at

www.gigabyte.com

1Connect the power cord to the AC adapter.

2Connect the AC adapter to the DC-in jack on the right side of the notebook.

3Connect the power cord to the power outlet.

Using GIGABYTE Notebook for the First Time

1

2

3

Switching on the Power

After you turn on the Notebook for the very

first time, do not turn it off until the operating

system has been configured. Please note that

the volume for the audio will not function until

Windows® Setup has completed.

IMPORTANT!

● Ensure that your Notebook PC is connected to a grounded power adapter before turning it on for the rst

time.

● When using your Notebook PC on power adapter mode, the socket outlet must be near to the unit and

easily accessible.

● Locate the input/output rating label on your Notebook PC and ensure that it matches the input/output

rating information on your power adapter. Some Notebook PC models may have multiple rating output

currents based on the available SKU.

● Power adapter information:

- Input voltage: 100-240Vac - Input frequency: 50-60Hz - Rating output voltage: 19.5V,10.3A

English

3

English

2

Top View & Front View 1Light sensor

2Webcam

3Microphone

4Power Button

5TouchPad

6LED Indicators

7Battery Indicator Button 

8Swappable Storage Bay

Bluetooth Status LED

Wireless Lan Status LED

HDD Status LED

Battery Status LED

Power Status LED

Press the right button of touchpad to

check the remaining battery power.

Right click to show the remaining power

percentage. As shown below, the

battery life indicator is available when

the laptop is shut down, in stand-by or

hibernation.(Battery mode)

<10%

11-30%

31-50%

51-70%

71-90%

>90%

1

2

Your GIGABYTE Notebook Tour

6

4

7

5

1

2

3

8

Booting Up the Notebook for the First Time

Depending on your conguration, the Microsoft® Windows® Boot Screen will be the rst screen that

you will see as the notebook starts up. Follow the on-screen prompts and instructions and enter

your personal information to complete the setup of the Windows® Operating System.

English

3

English

2Left View

21 3 6

4 5

1 4 5 6

2 3

1Kensington Lock Slot

2Ethernet Port

3USB 3.0 Port

4SD Card Reader

5Headphone Jack

6Microphone Jack

1Mini Display Port

2USB 3.0 Port (USB Charge)

3USB 3.1 Port

4HDMI Port

5External Display (VGA) Port

6DC-in Jack

1Speakers

Base View

Right View

1

Warning:

DO NOT remove the built-in lithium battery. For any service needs, please contact your local GIGABYTE

Authorized Service Center.

•

Do not install the Notebook PC on a slant or a place prone to vibrations, or avoid using the Notebook PC in that

location for a long time.This increases the risk that a malfunction or damage to the product will occur.

•

Do not store and use Notebook PC in direct sunlight or the location where temperatures exceed 112°F (45°C) such

as inside a vehicle.There is a danger of Lithium-ion battery expansion and aging.

•

Do not use the Notebook PC in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do

not use it in a location such as room with oor heating as it may cause the computer to overheat.Take care that the

Notebook PC vents (on the side or the bottom) are not blocked especially in these environments. If the vents are

blocked, it may be dangerous and cause the Notebook PC to overheat.

English

5

English

4

The computer employs hotkeys or key combinations to access most of the computer’s controls like

screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before

pressing the other key in the hotkey combination.

Hotkey Function Description

Fn+ESC Eject ODD Eject ODD

Fn+F1 Sleep Put the computer in Sleep mode.

Fn+F2 Wireless LAN Enables/disable the Wireless LAN function.

Fn+F3 Brightness Down Decrease the screen brightness.

Fn+F4 Brightness Up Increase the screen brightness.

Fn+F5 Display Toggle

Switche display output between the display

screen, external monitor (if connected) and

both.

Fn+F6 Touchpad Toggle Turn the internal touchpad on and off.

Fn+F7 Speaker Toggle Turn the speaker on and off.

Fn+F8 Volume Down Decrease the sound volume.

Fn+F9 Volume Up Increase the sound volume.

Fn+F10 Screen Display Toggle Turn the screen display on and off.

Fn+F11 Bluetooth Enable/disable the Bluetooth function.

Fn+F12 Webcam Turn the internal webcam on and off.

Fn+Space Keyboard Backlight

Toggle Turn the keyboard backlight on and off.

Macro key

Macro keys can be set via Macro Hub, setting combination keys for complicated and/or general

operation.

Macro key Macro key Description

GMacro group switch, press around 3 secconds as hardware

switch on/off.

G1 User Programmable Macro key

G2 User Programmable Macro key

G3 User Programmable Macro key

G4 User Programmable Macro key

G5 User Programmable Macro key

Hotkeys

English

5

English

4Swappable bay Application

1Unlock swappable bay locker.

2Draw the swappable bay out.

1

2

Connect the HDD or SSD pin by sliding it into the connecter.

9.5mm HDD/SSD only

English

7

English

6

2

1

1Pull swappable bay back to slot.

2Lock swappable bay locker.

Gently push the plastic frame outwards. Slide in the HDD or SSD until it locks into place. There will

be a slight click.

English

7

English

6

Welcome to use Macro Hub ! Macro Hub makes it much easier for you to control your Macro Key

on P37. You can deal with complex key stroke combination by just one press on macro key, which

brings you benets both in work and game. Before using Macro Hub, please read following guide,

thanks.

1 Launch Macro Hub

You can nd the shortcut of Macro Hub on desktop. Just double click it.

2 The overview of Macro Hub

4

5

1 3

2

1Proles: View your current macro command settings.

2Macros: Edit macro command funtions anf settings.

3Settings: Update Macro Hub version or renew macro hub settings.

4Macro Key Group Indicators: Indicate the activated Macro Key Group (the atcivated

group indicator will light up)

5Macro Key Function: Show the programmed Macro functions under the Macro Key

Group, from G1 to G5.

Macro Hub Instruction

English

9

English

8

3 Using Macro Hub

1Set Macro Key to basic function

a. Click the G button on the left-top of the

keyboard to switch to the Macro Key

group you would like to use

b. Click the Macro Key function brick

c. Double-click the function you would like to use(ex. Media Player) in the Basic or Macros

function area.

d. Complete the setting

English

9

English

8

2Edit macro command funtions anf settings.

a. Click "Macros" (you can set up to 100 sets of macro)

13

18

3

7

6

10

11

9

5

24

12

b. Overview of macro record panel (you can record your own macro here)

1. Start recording: Click when you’re about to record the macro

2. Pause key Switch: Enable/Disable Pause key to stop recording.

3. Macro Name: Set the name of this macro

4. Import icon: Set icon for this macro. You can use default icon or upload your own

icon

5. Record type: You can choose to record only mouse(or keyboard) movement, or

record both. You can also decide to or not to record mouse position.

6. Record interval: You can decide to or not to record the interval of each movement(or

You can set xed interval time between every movement)

7. Execution way: You can set the macro execution way (execution once, repeat

execution or repeat execution with deep press)

8. Export macro: Export your macro

9. Import macro: Import the macro

10. Delete all: Delete all movement in this macro

English

11

English

10

11. Delete selected: Delete selected movement

12. Movement list: it shows all movement you record

13. Exit: The system will inquire you if to save the recorded macro

c. Start to record macro: When you click start button, the macro engine will start to record

macro. All movement you made(mouse/keyboard) will be shown in the movement list.

You can decide to use “pause” key or mouse click on stop button to stop recording

based on your record range.Finishing recording: When you have done all movement,

click exit button. The Macro Engine will inquire you if you want to save the macro. Click

Yes then you can nish the record of your own macro.

d. Complete the setting.

English

11

English

10

3Edit "Settings" of Macro Hub

1

2

3

1. Software update: Update latest version of GIGABYTE Macro Hub

2. Clean memory: Erase current Macro Hub settings

3. Firmware Upgrade: Upgrade Macro Key rmware

English

13

English

12

GIGABYTE Smart Manager

You can activate GIGABYTE Smart Manager by double clicking on the shortcut icon on the

desktop if the machine you purchased has the operation system built-in. GIGABYTE Smart

Manager is an icon-based control interface, enabling users to intuitionally access common

system setup as well as GIGABYTE exclusive utilities. Please be noted that the GIGABYTE

Smart Manager interface, icons, utilities and software versions may vary based on the

purchased models. Please operate GIGABYTE Smart Manager according to the actual version

built-in.

GIGABYTE Software Application

English

13

English

12 Smart USB Backup Guide

WARNING

●You can backup original recovery image through this application in case of losing by device damage.

● You can backup original recovery image to USB disk and restore the system if any storage system

replacement with the recovery USB disk.

● Before you restore the system through the recovery USB disk, please make sure that you have already

made the backup of your data.

●Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.

1

>20G

• Please plug in the USB disk which is

at least 20GB in capacity to make the

original image (backup the data in USB

rst. All data will be eliminated during

the creation of recovery USB disk)

2• Insert the driver disk to your optical

drive and run the install of “Smart USB

Backup” (for none-ODD model, please

use USB ODD device or download

from http://www.gigabyte.com

3

• Run the “Smart USB Backup” after

nishing the install.

4

• Select your USB disk from the drop-

down list and start to create the

recovery USB disk.

5

• The window will pop out when the creation of recovery disk is done.

• Please press F12 on starting the system when you need to restore the system. Select

“boot from recovery USB disk” and the system will be restored.

• The time needed for restore will be around 30 mins(time needed may vary by USB disk

model) .

English

15

English

14

System Recovery (Restore your laptop operating system)

When something is going wrong with the laptop operating system, the storage of the laptop has

a hidden partition containing a full back up image of the operating system that can be used to

restore the system to factory default settings.

All ready to go

Make sure your PC is plugged in. This will take a few minutes.

2

1

Recovery Guide

Note

˙If the storage has been switched or the partition deleted, the recovery option will no longer be

available and a recovery service will be needed.

˙The recovery function is only available on devices with O/S preinstalled. Devices with DOS do not

have the recovery function.

Launch System Recovery

The system recovery feature is preinstalled before the laptop is shipped from the factory. The

option menu allows you to launch the Windows recovery tool to reinstall the operating system to

factory default.

The brief introduction below will show you how to start the recovery tool and restore your system.

Windows 7 Recovery Guide

Turn off and restart the laptop.

During the laptop turn on process, press and hold F9

key to launch the tool.

Caution



Once the “Recovery” is selected, your personal

data and les will be deleted after the laptop starts

restoring, and the operating system will be reset to

factory default settings.

The recovery will be activated and you will see the option

buttons on the window. Click on “Recovery” to start it.

3

English

15

English

14

A progress indicator bar will show on the window when

the recovery process is running. Please make sure the

AC-adapter is plugged in and do not turn off the laptop.

4

Reboot the laptop after the system recovery is complete.

5

Windows 10 Recovery Guide

During the laptop turn on process, press and hold F9

key to launch the tool.

2

1

3

Turn off and restart the laptop.

There are two options for system recovery

˙Reset this PC

You can choose to keep or remove your files and then reinstalls Windows

without losing your les.

˙ GIGABYTE Smart Recovery

Your PC settings will be restored to factory default settings.

Caution: All personal data and les will be lost.

Choose “Troubleshoot” to enter the recovery settings. (Also you can choose

“Continue” to exit recovery system and continue to Windows 10 for files or

data backup.)

English

17

English

16

Here are what will happen

˙All of your personal les and apps will be removed.

˙Your PC settings will be restored to pure O/S (without GIGABYTE app) .

4▓▓▓▓▓Choose “Reset this PC”

 Keep my les

Choose an account to continue.All apps will be removed, and settings

will back to pure O/S (without GIGABYTE app), but your personal les

will be kept.

 Remove everything

All apps, setting and personal les will be removed.

 Just remove my les

Only personal data and les will be removed, but computer settings will

be kept.

 Fully clean the drive

The drive will be completely restored to factory default settings. It takes

more time. > [Click on “Reset” to execute recovery function.]

▓▓▓▓▓GIGABYTE Smart Recovery

Caution

˙Once the “Recovery” is selected, your personal data and les will be deleted

after the laptop starts restoring, and the operating system will be reset to

factory default settings.

˙A progress indicator bar will show on the window when the recovery process is

running. Please make sure the AC-adapter is plugged in and do not turn off the

laptop.

The recovery will be activated and you will see the

option buttons on the window. Click on “Yes” to start it.

After the system recovery is completed, you will see

the option button on the window, please click on

“Shutdown”.

English

17

English

16

▓Advanced options

System Restore

Use a restore point recorded on your PC to restore Windows.

System Image Recovery

Recover Windows using a specic system image le.

Startup Repair

Fix problems that keep Windows from loading.

Command Prompt

Use the Command Prompt for advanced trobleshooting.

UEFI Firmware Settings

Change settings in your PC’s UEFI rmware.

Startup Settings

Change Windows Startup behavior.

English

PB

English

18

Warranty & Service:

Warranty and service and related information please refer to the warranty card or GIGABYTE

service website as the below link:

http://www.gigabyte.com/support-downloads/technical-support.aspx

FAQ:

FAQ (Frequent Asked Questions) please refer to the below link:

http://www.gigabyte.com/support-downloads/faq.aspx

 Full User Manual:

For more user guide and software instruction, please refer to the below link:

http://www.gigabyte.com/support-downloads/download-center.aspx

Appendix

1PB

為協助您順利使用技嘉筆記型電腦，我們特地設計此快速安裝說明。如果您需要更多關於電腦功能，

歡迎上技嘉官方網站 www.gigabyte.tw查詢。產品實際規格以出貨為準，如有異動恕不另行通知。

感謝您選擇技嘉筆記型電腦 !

1將電源線接上變壓器。

2將變壓器連接到筆記型電腦右側邊的電源插孔。

3將電源線插入電源插座。

首次使用GIGABYTE技嘉筆記型電腦

開啟筆記型電腦：

電源指示燈會顯示機器是否為開機狀態。第一次

開機時在還未完全進入作業系統前，請勿強制關

機。開啟電源後直到該作業系統配置完成前，音

量將無法設定。

1

2

3

重要

• 第一次啟動筆記型電腦之前，請先確認已經將電源變壓器連接至電腦。

• 找出筆記型電腦的輸入/輸出頻率標籤，並請確認符合電源變壓器上的輸入/輸出頻率資訊。

• 當筆記型電腦在電源變壓器使用模式時，請將電源變壓器靠近插座以便於使用。

• 電源變壓器資訊：輸入電壓：100-240Vac ，輸入頻率：50-60Hz ，輸出電壓功率：19.5V,10.3A

開始第一次使用筆記型電腦：

根據您的筆記型電腦配置，當您一開機的第一個畫面將會是微軟Windows®® 的啟動畫面，請按照該螢

幕上的提示和指示完成作業系統的配置。當軟體的許可條款顯示於畫面時，請務必閱讀並按同意後再

繼續使用。

ページが読み込まれています...

Gigabyte P37X V6 取扱説明書

Gigabyte P37X V6 取扱説明書

他の言語で

関連論文

その他のドキュメント