Pluto Non DI_China
90x127mm
3000 051 86881
显示
滤网使用一段时间后可能会散发异味，这是因为吸附了室内的气味导致。建议您将
滤网置于阳光底下晾晒后继续使用。如晾晒后异味仍较明显影响使用体验，建议更
换滤网。
控制
非常差
模式切换/
滤网重设
更换滤网后，长按 3 秒钟 (FY0194)
每四周清洁滤网表面。
清洁滤网表面 当屏幕显示 时更换滤网
电源开/关按钮
维护
良好 较差一般
空气质量指示灯
滤网更换提示
空气质量
自动 劲速 睡眠
Display
The lter may produce smell after being used for a while because of the
absorption of indoor air. Remove the lter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try using it again.
If the odor remains, please replace the lter.
Control
Very poor
Mode switch/
Filter reset
Replace the NanoProtect Filter
Series 2 (FY0194).
Long press the for 3 seconds.
Clean the surface of the lter
every 4 weeks.
Clean the surface of the lter
Power on/o
Maintenance
Good PoorFair
Air quality light
Filter replacement alert
Air quality
Auto Turbo Sleep
Replace lter when display shows
-
1
