ENGLISH
Remove terminal block A.
Each terminal block accepts one pair
of speakers.
Connect and secure the speaker wires
to terminal block A.
1. Insert the left speaker’s marked wire into the
+ L positive terminal and the plain wire into
the
L – negative terminal.
2. Insert the right speaker’s marked wire into the
+ R positive terminal and the plain wire into
the
R – negative terminal.
Reinsert terminal block A.
To connect a second pair of speakers,
repeat steps 1-3 using terminal block B.
Note: Refer to your speaker owner’s
guide for instructions on connecting
the other end of the speaker wires to
the speakers. You can connect up to two
pairs of unpowered speakers.