© 2016 Koninklijke Philips N.V.
保留所有权利
3140 035 38933
English
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
• WARNING: Do not use this
appliance near water.
• When the appliance is used in
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched o.
• WARNING: Do not use this
appliance near bathtubs,
showers, basins or other
vessels containing water.
• Always unplug the
appliance after use.
在以下网站注册并获得支持
www.philips.com.cn/welcome
HP8372
• If the mains cord is damaged,
you must have it replaced
by Philips, a service centre
authorised by Philips or similarly
qualied persons in order to
avoid a hazard.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• Before you connect the
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
• Do not use the appliance
for any other purpose than
described in this manual.
• When the appliance is
connected to the power, never
leave it unattended.
• Never use any accessories or
parts from other manufacturers
or that Philips does not
specically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not wind the mains cord
round the appliance.
• Wait until the appliance has
cooled down before you store it.
• Pay full attention when using
the appliance since it could be
extremely hot. Only hold the
handle as other parts are hot
and avoid contact with the skin.
• Always place the appliance
with the stand on a heat-
resistant, stable at surface.
The hot heating plates should
never touch the surface or other
ammable material.
• Avoid the mains cord from
coming into contact with the hot
parts of the appliance.
• Keep the appliance away from
ammable objects and material
when it is switched on.
• Never cover the appliance
with anything (e.g. a towel or
clothing) when it is hot.
• Only use the appliance on
dry hair. Do not operate the
appliance with wet hands.
• Keep the heating plates clean
and free of dust and styling
products such as mousse,
spray and gel. Never use the
appliance in combination with
styling products.
• The heating plates has coating.
This coating might slowly wear
away over time. However, this
does not aect the performance
of the appliance.
• If the appliance is used on
color-treated hair, the heating
plates may be stained. Before
using it on articial hair, always
consult their distributor.
• Always return the appliance to
a service centre authorized by
Philips for examination or repair.
Repair by unqualied people
could result in an extremely
hazardous situation for the user.
• Do not insert metal objects
into openings to avoid electric
shock.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
an ocial collection point for recycling. By doing this,
you help to preserve the environment.
2 Introduction
The MoistureProtect straightener has an innovative new
sensor technology called the Moisture Protect sensor.
This technology has been specically designed to preserve
the natural hydration of your hair. The sensor diagnoses your
hair 30 times per second and adapts the temperature to
preserve natural hydration of your hair. This gives advanced
protection to your hair from overheating and therefore keeps
your hair healthier and shinier. We’ve already turned the
sensor on so you can enjoy maximum protection right from
the start.
3 Overview
a Heating plates
b Display panel
c Temperature setting
d MoistureProtect on/o
e Power on/o
f Closing lock
g Swivel cord
h Hanging loop
i Pouch for storage
EN User manual
ZH-CN 用户手册
4 Straighten your hair
Before use:
• Wash your hair with shampoo and conditioner.
• Blow dry your hair with a brush.
Note:Always select a low setting when you use the
straightener for the rst time.
1 Connect the plug to a power supply socket.
2 Push down the closing lock to unlock the appliance ( f ).
3 Press the power on/o button ( e ) for one second to
switch on the straightener.
» The Moisture Protect LED is lit and the temperature
indicator ‘175‘( b ) starts blinking on the display.
» If the appliance is powered on, ions are automatically
and continuously dispensed from the outlet, reducing
frizz and providing additional shine.
4 Press the temperature button or to select a
suitable temperature setting for your hair. The selected
temperature starts blinking on the display.You can refer
to the Hair Type table below.
Hair Type Temperature Setting
Coarse, curly, hard-to-straighten
200ºC
Fine, medium-textured or softly
waved
175ºC
Pale, blonde, bleached or color-
treated
150ºC
» When the straightening plates have heated up to the
selected temperature, the digits stop blinking.
5 To switch o/on the MoistureProtect, press and hold the
button ( d ) for one second.
6 Comb your hair and take a section that is not wider than
5cm for straightening.
Note: For thicker hair, it is suggested to create more
sections.
For max. moisture preservation we recommend 1 stroke
with relatively fewer hair strands.
7 Place it between the straightening plates and press the
handles rmly together.
8 Slide the straightener down the length of the hair in a
single motion (max. 5 seconds) from root to end without
stopping.
9 To straighten the rest of your hair, repeat steps 6 to 8.
10 To nish your hair styling, mist with a shine spray or
exible hold hairspray.
Note: The appliance is equipped with an auto-shut o
function. After 60 minutes, the appliance switches o
automatically. You can re-start the appliance by pressing
and holding the power on/o button until the LED screen
lights up.
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp
cloth.
4 Lock the straightening plates ( f ).
c
b
a
d
e
f
g
hi
5 Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop ( h ) or store it with the
supplied pouch ( i ).
5 Guarantee and service
If you need information e.g. about replacement of an
attachment or if you have a problem, please visit the Philips
website at www.philips.com/support or contact the Philips
Customer Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local
Philips dealer.
6 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at all.
The power
socket to which
the appliance
has been
connected may
be broken.
Check the appliance is
plugged in correctly.
Check the fuse for this
power socket in your
home.
The mains
cord of the
appliance may
be damaged.
If the mains cord is
damaged, you must
have it replaced by a
service centre authorised
or similarly qualied
persons in order to avoid
a hazard.
简体中文
感谢您的惠顾,欢迎光临飞利浦!为了
您能充分享受飞利浦提供的支持,请在
www.philips.com.cn/welcome
注册您的产品。
1 重要事项
使用产品之前,请仔细阅读本用户
手册,并妥善保管以供日后参考。
• 警告:请勿在靠近水的地方使用本
产品。
• 在浴室内使用产品后需拔下
插头,即使产品已关闭,近水放置
仍存在危险。
• 警告:不要在盛水的浴缸、
淋浴、洗脸盆或其他器皿附近使用
本器具。