© 2016 Koninklijke Philips N.V.
保留所有权利
3140 035 38933
English
Congratulations on your purchase, and welcome to Philips!
To fully benet from the support that Philips oers, register
your product at www.philips.com/welcome.
1 Important
Read this user manual carefully before you use the
appliance and keep it for future reference.
• WARNING: Do not use this
appliance near water.
• When the appliance is used in
a bathroom, unplug it after use
since the proximity of water
presents a risk, even when the
appliance is switched o.
• WARNING: Do not use this
appliance near bathtubs,
showers, basins or other
vessels containing water.
• Always unplug the
appliance after use.
在以下网站注册并获得支持
www.philips.com.cn/welcome
HP8372
• If the mains cord is damaged,
you must have it replaced
by Philips, a service centre
authorised by Philips or similarly
qualied persons in order to
avoid a hazard.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be made
by children without supervision.
• Before you connect the
appliance, ensure that the
voltage indicated on the
appliance corresponds to the
local power voltage.
• Do not use the appliance
for any other purpose than
described in this manual.
• When the appliance is
connected to the power, never
leave it unattended.
• Never use any accessories or
parts from other manufacturers
or that Philips does not
specically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not wind the mains cord
round the appliance.
• Wait until the appliance has
cooled down before you store it.
• Pay full attention when using
the appliance since it could be
extremely hot. Only hold the
handle as other parts are hot
and avoid contact with the skin.
• Always place the appliance
with the stand on a heat-
resistant, stable at surface.
The hot heating plates should
never touch the surface or other
ammable material.
• Avoid the mains cord from
coming into contact with the hot
parts of the appliance.
• Keep the appliance away from
ammable objects and material
when it is switched on.
• Never cover the appliance
with anything (e.g. a towel or
clothing) when it is hot.
• Only use the appliance on
dry hair. Do not operate the
appliance with wet hands.
• Keep the heating plates clean
and free of dust and styling
products such as mousse,
spray and gel. Never use the
appliance in combination with
styling products.
• The heating plates has coating.
This coating might slowly wear
away over time. However, this
does not aect the performance
of the appliance.
• If the appliance is used on
color-treated hair, the heating
plates may be stained. Before
using it on articial hair, always
consult their distributor.
• Always return the appliance to
a service centre authorized by
Philips for examination or repair.
Repair by unqualied people
could result in an extremely
hazardous situation for the user.
• Do not insert metal objects
into openings to avoid electric
shock.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic elds.
Environment
Do not throw away the appliance with the normal
household waste at the end of its life, but hand it in
an ocial collection point for recycling. By doing this,
you help to preserve the environment.
2 Introduction
The MoistureProtect straightener has an innovative new
sensor technology called the Moisture Protect sensor.
This technology has been specically designed to preserve
the natural hydration of your hair. The sensor diagnoses your
hair 30 times per second and adapts the temperature to
preserve natural hydration of your hair. This gives advanced
protection to your hair from overheating and therefore keeps
your hair healthier and shinier. We’ve already turned the
sensor on so you can enjoy maximum protection right from
the start.
3 Overview
a Heating plates
b Display panel
c Temperature setting
d MoistureProtect on/o
e Power on/o
f Closing lock
g Swivel cord
h Hanging loop
i Pouch for storage
EN User manual
ZH-CN 用户手册
4 Straighten your hair
Before use:
• Wash your hair with shampoo and conditioner.
• Blow dry your hair with a brush.
Note:Always select a low setting when you use the
straightener for the rst time.
1 Connect the plug to a power supply socket.
2 Push down the closing lock to unlock the appliance ( f ).
3 Press the power on/o button ( e ) for one second to
switch on the straightener.
» The Moisture Protect LED is lit and the temperature
indicator ‘175‘( b ) starts blinking on the display.
» If the appliance is powered on, ions are automatically
and continuously dispensed from the outlet, reducing
frizz and providing additional shine.
4 Press the temperature button or to select a
suitable temperature setting for your hair. The selected
temperature starts blinking on the display.You can refer
to the Hair Type table below.
Hair Type Temperature Setting
Coarse, curly, hard-to-straighten
200ºC
Fine, medium-textured or softly
waved
175ºC
Pale, blonde, bleached or color-
treated
150ºC
» When the straightening plates have heated up to the
selected temperature, the digits stop blinking.
5 To switch o/on the MoistureProtect, press and hold the
button ( d ) for one second.
6 Comb your hair and take a section that is not wider than
5cm for straightening.
Note: For thicker hair, it is suggested to create more
sections.
For max. moisture preservation we recommend 1 stroke
with relatively fewer hair strands.
7 Place it between the straightening plates and press the
handles rmly together.
8 Slide the straightener down the length of the hair in a
single motion (max. 5 seconds) from root to end without
stopping.
9 To straighten the rest of your hair, repeat steps 6 to 8.
10 To nish your hair styling, mist with a shine spray or
exible hold hairspray.
Note: The appliance is equipped with an auto-shut o
function. After 60 minutes, the appliance switches o
automatically. You can re-start the appliance by pressing
and holding the power on/o button until the LED screen
lights up.
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Clean the appliance and straightening plates by damp
cloth.
4 Lock the straightening plates ( f ).
c
b
a
d
e
f
g
hi
5 Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop ( h ) or store it with the
supplied pouch ( i ).
5 Guarantee and service
If you need information e.g. about replacement of an
attachment or if you have a problem, please visit the Philips
website at www.philips.com/support or contact the Philips
Customer Care Centre in your country (you nd its phone
number in the worldwide guarantee leaet). If there is no
Consumer Care Centre in your country, go to your local
Philips dealer.
6 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at all.
The power
socket to which
the appliance
has been
connected may
be broken.
Check the appliance is
plugged in correctly.
Check the fuse for this
power socket in your
home.
The mains
cord of the
appliance may
be damaged.
If the mains cord is
damaged, you must
have it replaced by a
service centre authorised
or similarly qualied
persons in order to avoid
a hazard.
简体中文
感谢您的惠顾，欢迎光临飞利浦！为了
您能充分享受飞利浦提供的支持，请在
www.philips.com.cn/welcome
注册您的产品。
1 重要事项
使用产品之前，请仔细阅读本用户
手册，并妥善保管以供日后参考。
• 警告：请勿在靠近水的地方使用本
产品。
• 在浴室内使用产品后需拔下
插头，即使产品已关闭，近水放置
仍存在危险。
• 警告：不要在盛水的浴缸、
淋浴、洗脸盆或其他器皿附近使用
本器具。
产品中有害物质的名称及含量
部件名称
有害物质
铅（
Pb
） 汞（
Hg
） 镉（
Cd
） 六价铬（
Cr6+
） 多溴联苯（
PBB
） 多溴二苯醚（
PBDE
）
发热架组合
X
O O O O O
负离子发生器
X
O O O O O
电源线
X
O O O O O
本表格依据
SJ/T 11364
的规定编制。
O
：表示该有害物质在该部件所有均质材料中的含量均在
GB/T 26572
规定的限量要求以下。
X
：表示该有害物质至少在该部件的某一均质材料中的含量超出
GB/T 26572
规定的限量要求。
ϔ৮ 喟下ݖ⊓Ⱑࣾ䕍ಸக
ಸत 喟)1
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ 喟䄤㻮ϔ৮᱙Ҁ
ϔౝ 喟͚పᎬ͉͉㣋
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍
下ݖ⊓喍͚ప喎ែ䉱ᰶ䭽ڙथ
̷⊤ጯ๖Ⱋ㺬䌜त
ڕప䶫ߎ☚㏬喟
• 警告符号注释：禁止在洗澡
或淋浴时使用。
• 使用后务必拔下产品的插
头。
• 如果电源软线损坏，为了避免危
险，必须由制造商、其维修部或类
似部门的专业人员更换。
• 本产品适合由
8
岁或以上年龄的
儿童以及肢体不健全、感觉或精神
上有障碍或缺乏相关经验和知识的
人士使用，但前提是有人对他们使
用本产品进行监督或指导，以确保
他们安全使用，并且让他们明白
相关的危害。不得让儿童玩耍本产
品。不要让儿童在无人监督的情况
下进行清洁和
保养。
• 连接产品之前，请确保产品上标示
的电压与当地电源电压相符。
• 请勿将本产品用于本手册中说明以
外的任何其它用途。
• 当产品连接了电源时，切勿让其无
人看管。
• 切勿使用由其它制造商生产的，或
未经飞利浦特别推荐的任何附件或
部件。如果使用此类附件或部件，
您的保修将失效。
• 切勿将电源线缠绕在产品上。
• 待产品完全冷却后再存放。
• 由于产品会很烫，请在使用时多加
注意。只能握住手柄，因为其他部
位会很烫，并且避免与皮肤接触。
• 始终将本产品放置在隔热的平稳表
面上。热加热板不得接触表面或其
他可燃材料。
• 不要使电源线接触到产品的灼热部
分。
• 如果产品已打开，请使产品远离易
燃物体和材料。
• 当产品变热时切勿在其表面覆盖任
何物品（如毛巾或衣服）。
• 产品只能用于干的头发。切勿用湿
手操作本产品。
• 保持加热板洁净无尘且未粘上定型
产品
(
如摩丝、定型喷剂和
发胶
)
。切勿将本产品与定型产品
结合使用。
• 加热板上涂有涂层。此涂层可能会
随着时间的推移慢慢磨损。
但是，这并不影响产品的性能。
• 将产品用于染过色的头发时，加热
板可能会染上颜色。将产品用于假
发之前，务必先咨询其经销商。
• 产品只能送到飞利浦授权的服务中
心检修。由不合格人员进行修理可
能将用户置于极度危险的
境地。
• 切勿将金属物体插入开口中，
以免触电。
电磁场 (EMF)
本飞利浦产品符合所有有关暴露于电磁场
的适用标准和法规。
环保
弃置产品时，请不要将其与一般生活
垃圾堆放在一起，应将其交给政府指
定的回收中心。
这样做有利于
环保。
2 简介
MoistureProtect
直发器采用创新的
新型传感器技术，其称为保湿传感器。
该技术专为保持头发的自然滋润而设计。
该传感器每秒钟对头发分析
30
次，调
整温度，以保持头发的自然滋润。这可为
头发提供先进的保护，防止其过热，让您
的秀发更健康、更亮泽。我们已经打开了
传感器，因此您从一开始就可以享受最完
善的保护。
3 概述
a 加热板
b
显示面板
c
温度设定
d
MoistureProtect 开/关
e
开启/关闭
f
锁扣
g
电源线
h
挂环
i
收纳袋
4 拉直头发
使用之前
：
• 用洗发水和护发素洗净头发。
• 吹干时用梳子梳理头发。
注意
：
首次使用直发器时，一定要选择较
低的温度设定。
1 将插头连接至电源插座。
2 拨动锁扣将产品解锁
(
f
)
。
3 按电源开
/
关按钮
(
e
) 1
秒钟可打
开直发器。
»
Moisture Protect LED
会亮起，显示屏上的温度指
示“175”
(
b
)
开始闪烁。
» 如果产品已接通电源，将自动并连
续地从出口产生负离子，令秀发更
加顺滑、亮泽。
4 按住温度按钮
或
选择适合您发质
的温度设定。选定的温度会在显示屏
上开始闪烁。您可以参阅下面的发质类
型表。
发质类型 温度设定
粗糙，带卷，很难拉直
200ºC
纤细，中性发质或略卷
175ºC
白发、金发、经过漂白
或者染过色的头发
150ºC
» 直发夹板加热至选定的温度后，数
字将停止闪烁。
5 要关闭
/
打开
MoistureProtect
，请
按住
按钮
(
d
) 1
秒钟。
6 梳理头发，取一绺宽度不超过
5
厘米
的头发进行拉直。
注意
：
对于较浓密的头发，建议将头发分
为更多发绺。
为了最大限度地保持润泽，我们建议每次
选取较少量的发绺。
7 将头发置于直发夹板之间，然后用力将
手柄按拢。
8 从发根至发梢，将直发器顺着头发往
下拉（不要超过
5
秒）动作要流畅，
不要停顿。
9 要拉直头发的其余部分，重复步骤
6
至
8
即可。
10 要完成您的头发造型，请喷上一
些亮泽喷雾或柔护定型剂。
注意
：
产品配备自动关熄功能。
60
分钟后，产品将自动关闭。您只需重
新启动产品，即按住电源开
/
关按钮，直
至
LED
屏幕亮起。
使用后
：
1 请关闭产品并拔下电源插头。
2 将产品置于隔热表面上，直至其冷却。
3 用湿布清洁本产品和直发夹板。
4 锁定直发夹板
(
f
)
。
5 将产品存放在安全、干燥、清洁的位
置。您也可以使用挂环
(
h
)
将产品挂起或将其存放在随附的
软袋
(
i
)
中。
5 保修与服务
如果您需要了解信息（如更换附件的相关
信息）或有任何疑问请访问飞利浦网站
www.philips.com.cn/support
。
您也可以与您所在地的飞利浦客户服
务中心联系（可从保修卡中找到其电
话号码）。如果您所在的国家
/
地区没有
飞利浦客户服务中心，请向当地的飞利浦
经销商求助。
6 故障排除
问题 原因 解决方法
产品完
全无法
工作。
产品所连接
的电源插
座可能已损
坏。
检查设备已正确
插入。
检查您家中电源
插座的保险丝。
产品的电源
线可能已损
坏。
如果电源软线损
坏，为了避免危
险，必须由制造
商、其维修部或
类似部门的专业
人员来更换。
保留备用
出版日期：
2016-07-01
-
1
-
2
他の言語で
- English: Philips HP8372/05 User manual
関連論文
-
Philips BHB878/05 Product Datasheet
-
-
-
-
-
-
-
-
-