Bose SA5 取扱説明書

Owner’s Guide

Brugervejledning

Bedienungsanleitung

Gebruikershandleiding

Guía del usuario

Käyttöohje

Notice d’utilisation

Manuale di istruzioni

Kezelési útmutató

Brukerveiledning

Podręcznik użytkownika

Manual do Proprietário

Bruksanvisning

SOUNDTOUCH

®

SA-5

AMPLIFIER

2 - ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety, security, and use instructions.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water or moisture.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any

way: such as power supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus;

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

The lightning ﬂash with arrowhead symbol within an equilateral triangle alerts the user to the presence of

uninsulated, dangerous voltage within the system enclosure that may be of sucient magnitude to constitute a

risk of electric shock.

The exclamation point within an equilateral triangle alerts the user to the presence of important operating and

maintenance instructions in the owner’s guide.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do not expose this apparatus to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases, on or

near the apparatus. As with any electronic products, use care not to spill liquids into any part of the product. Liquids

can cause a failure and/or a ﬁre hazard.

• Do not place naked ﬂame sources, such as lighted candles, on or near the apparatus.

• The product must be used indoors. It is neither designed nor tested for use outdoors, in recreation vehicles, or

on boats.

• Make no modiﬁcations to the system or accessories. Unauthorized alterations may compromise safety, regulatory

compliance, and system performance.

NOTES:

• Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain

readily operable.

• The product label is located on the bottom of the product.

• Refer to your local building codes for wire types suitable for your application.

• Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

• Operate this product within the temperature range of 32° F to 104° F (0° C to 40° C).

仅适用于 2000m 以下地区安全使用

Use at altitude less than 2000 meters only.

ENGLISH - 3

REGULATORY INFORMATION

Information about products that generate electrical noise

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

This device when operating in the 5150 to 5250 MHz band is for indoor use only to reduce the potential for harmful

interference to co-channel mobile satellite systems.

Important USA and Canada compliance Information

This device complies with part 15 of the FCC rules and ISED Canada license-exempt RSS standard(s). Operation is subject

to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment complies with FCC and ISED Canada radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This equipment must not be co-located or be operating in conjunction with any other antennas or transmitters.

This device complies with ISED Canada license-exempt RSS standard(s).

This Class B digital apparatus complies with Canadian ICES-003.

CAN ICES-3 (B)/NMB-3(B)

4 - ENGLISH

REGULATORY INFORMATION

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other

relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete

declaration of conformity can be found at: www.Bose.com/compliance

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC,

is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by

Regulation (EU) No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

≤ 0.5 W all network types ≤ 3.0 W

Time after which equipment is automatically

switched into mode

< 2.5 hours ≤ 20 minutes

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A ≤ 3.0 W

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Wi-Fi® and Bluetooth®: Deactivate by pressing and holding the unit's

Control button until the Wi-Fi indicator turns o. Activate by pressing the

Control button.

Ethernet: Deactivate by removing the Ethernet cable. Activate by

inserting the Ethernet cable.

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

Bluetooth/Wi-Fi: Maximum transmit power less than 20 dBm EIRP.

Bluetooth Low Energy: Maximum power spectral density less than 10 dBm/MHz EIRP.

Frequency band of operation 5150 to 5350 MHz and 5470 to 5725 MHz:

Wi-Fi: Maximum transmit power less than 20 dBm EIRP.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member States

listed in the table.

BE DK IE UK FR CY SK HU AT SE

BG DE PT EL HR LV LT MT PL

CZ EE FI ES IT RO LU NL SI

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human

health and the environment. For more information on disposal and recycling of this product, contact your local

municipality, disposal service, or the shop where you bought this product.

ENGLISH - 5

REGULATORY INFORMATION

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit

requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above

the limit requirement of GB/T 26572.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “9” is 2009 or 2019.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: 886 2 2514 7977

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

LEGAL INFORMATION

Security Information

This product is capable of receiving automatic security updates from Bose. To receive automatic security

updates, you must complete the product setup process in the SoundTouch® App and connect the product to

the Internet. If you do not complete the setup process, you will be responsible for installing security

updates that Bose makes available.

License Disclosures

You can view the license disclosures that apply to the third-party software packages included with your ampliﬁer

through the SoundTouch® app or by using your product’s IP address.

SoundTouch® app

1. From within the app, select Y > Settings > About > Legal.

2. Select the applicable license type.

IP address

1. Obtain your product’s IP address using one of the following methods:

• SoundTouch® app: From within the app, select Y > Settings > About.

Select your ampliﬁer to view the IP address.

• Wireless router: Refer to your router owner’s guide for more information.

2. On a device connected to your wireless network, open a browser window.

3. Go to <IP address>/licenses.pdf to view the applicable license disclosures and EULA.

Amazon, Kindle, Fire and all related logos are trademarks of Amazon, Inc. or its aliates.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service

mark of Apple Inc.

Android, Google Play, and the Google Play logo are trademarks of Google LLC.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks

by Bose Corporation is under license.

This product contains the iHeartRadio service. iHeartRadio is a registered trademark of iHeartMedia, Inc.

SoundTouch and the wireless note design are registered trademarks of Bose Corporation in the U.S. and other countries.

This product incorporates Spotify software which is subject to third-party licenses found here:

www.spotify.com/connect/third-party-licenses

Spotify is a registered trademark of Spotify AB.

Wi-Fi is a registered trademark of Wi-Fi Alliance®.

Bose Corporation Headquarters: 1-877-230-5639

written permission.

Please complete and retain for your records

The serial and model numbers are located on the back or bottom of the product.

Serial number: ______________________________________________________________________

Model number: ______________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to http://global.Bose.com/register

ENGLISH - 7

CONTENTS

Carton Contents

What’s in the carton.......................................................................................................... 9

Initial Setup

Placement guidelines ....................................................................................................... 10

Speaker connection guidelines .................................................................................... 10

Speaker wire length recommendations ............................................................ 10

Place your speakers .......................................................................................................... 11

Connect your speakers to the ampliﬁer .................................................................... 11

Connect a second pair of speakers ................................................................... 13

Connect the ampliﬁer to power ................................................................................... 14

Network standby ................................................................................................................ 14

SoundTouch® App Setup

Download and install the SoundTouch® app ........................................................... 15

SoundTouch® Owner’s Center ....................................................................................... 15

Existing SoundTouch® Users

Add the ampliﬁer to an existing account ................................................................. 16

Connect the ampliﬁer to a new network .................................................................. 16

Preset Personalization

Set a preset .......................................................................................................................... 17

Play a preset ........................................................................................................................ 17

Bluetooth® Technology

Connect your mobile device.......................................................................................... 18

Disconnect a mobile device ........................................................................................... 18

Connect using the Bluetooth feature on your mobile device .......................... 19

Ampliﬁer Components

Connectors ........................................................................................................................... 20

Wired Connections

Connect to the AUX IN connector .............................................................................. 21

8 - ENGLISH

CONTENTS

Wi-Fi® Indicator

Wi-Fi status .......................................................................................................................... 22

Advanced Features

Disable Wi-Fi and Bluetooth technology ................................................................. 23

Re-enable Wi-Fi and Bluetooth technology ............................................................ 23

Overload protection ......................................................................................................... 23

Care and Maintenance

Clean the ampliﬁer ............................................................................................................ 24

Customer service ............................................................................................................... 24

Limited warranty ................................................................................................................ 24

Technical information ....................................................................................................... 25

Troubleshooting

Common solutions ............................................................................................................ 26

Clear the ampliﬁer’s Bluetooth pairing list .............................................................. 28

Reset the ampliﬁer ............................................................................................................ 28

Wall-Mounting

Hardware speciﬁcations .................................................................................................. 29

Mount the bracket to the wall ....................................................................................... 29

Attach the ampliﬁer to the mounting bracket ....................................................... 31

Appendix: Computer Setup

Set up your ampliﬁer using a computer ................................................................... 32

Before you begin ....................................................................................................... 32

Computer setup ......................................................................................................... 32

ENGLISH - 9

CARTON CONTENTS

What’s in the carton

Carefully unpack the carton and conﬁrm that the following parts are included.

SoundTouch® SA-5 ampliﬁer Mounting bracket

Anchors (2) Screws (2) Power cord*

*May ship with multiple power cords. Use the power cord for your region.

Note: If part of the ampliﬁer is damaged, do not use it. Contact your authorized Bose®

dealer or Bose customer service. Visit: global.Bose.com/Support/SA5

for contact information.

10 - ENGLISH

INITIAL SETUP

Placement guidelines

To avoid interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m) away from

your ampliﬁer.

• Install the ampliﬁer indoors.

• Make sure there is an AC (mains) outlet nearby.

• Place the ampliﬁer on a shelf or mount it on a wall.

• For optimum performance, place the ampliﬁer in a well-ventilated area.

CAUTIONS:

• Place the ampliﬁer in an area where the maximum ambient temperature is less than

104°F (40°C).

• Place the ampliﬁer with a minimum of 3 in. (75 mm) of ventilation around it.

• Do NOT place the ampliﬁer in a completely enclosed area. Doing so may result in poor

performance.

• Do NOT stack multiple ampliﬁers on top of each other. If using multiple ampliﬁers,

place them side by side.

Note: To mount the ampliﬁer on a wall, see page 29.

Speaker connection guidelines

• Use only unpowered speakers. Do NOT connect any make or model of powered

speakers. Doing so may cause damage to the equipment.

• One pair of speakers requires 4 ohm minimum each.

• Two pairs of speakers require 8 ohm minimum each.

Speaker wire length recommendations

Maximum Length Gauge

30 ft. (9 m) 18 (0.82 mm

2

)

45 ft. (14 m) 16 (1.3 mm

2

)

70 ft. (21 m) 14 (2.0 mm

2

)

ENGLISH - 11

INITIAL SETUP

Place your speakers

Place your speakers in their permanent location before connecting the speaker wires to

the ampliﬁer.

Connect your speakers to the ampliﬁer

After you place your speakers, connect the speaker wires to the ampliﬁer.

Speaker wires consist of two insulated wires:

• The marked wire (stripes, ribbing or color) connects to the positive (+) terminal.

• The plain wire connects to the negative (–) terminal.

Before connecting your speakers, make sure the ampliﬁer is unplugged from an AC

(mains) power source.

1. Remove terminal block A from the SPEAKERS OUT connector.

2. Connect the speaker wires to terminal block A:

A. Insert the left speaker’s marked wire into the + L positive terminal and the

plain wire into the

L – negative terminal.

B. Insert the right speaker’s marked wire into the + R positive terminal

and the plain wire into the

R – negative terminal.

12 - ENGLISH

INITIAL SETUP

3. Using a small, ﬂat-head screwdriver, tighten the screws on the terminals clockwise to

secure the wires.

4. Reinsert the terminal block connector into the SPEAKERS OUT connector.

5. Follow the operating instructions for your unpowered speakers to connect

the other end of the speaker wires to the speakers.

Tip: Use a silicone caulking material such as RTV adhesive (available at hardware

stores) to protect the wiring at any outdoor speaker connections.

ENGLISH - 13

INITIAL SETUP

Connect a second pair of speakers

You can connect two pairs of speakers to the ampliﬁer for full sound in a large space or

to play the same audio in dierent rooms.

To connect a second pair of speakers, repeat steps 1 - 5 in "Connect your speakers to the

ampliﬁer" on page 11, using terminal block B.

14 - ENGLISH

INITIAL SETUP

Connect the ampliﬁer to power

Connect the ampliﬁer to power after you connect the speaker wires to the ampliﬁer.

1. Plug the power cord into the connector on the ampliﬁer.

2. Plug the other end of the power cord into an AC (mains) power outlet.

Network standby

The ampliﬁer transitions to network standby when audio has stopped and you have not

pressed any buttons for 20 minutes. To wake the ampliﬁer from network standby:

• Play or resume audio using the SoundTouch® app on your mobile device.

• Press the Control button (see page 23).

• On the SoundTouch® remote control, press the Power button I, source button, or

preset button.

ENGLISH - 15

SOUNDTOUCH® APP SETUP

The SoundTouch® app lets you set up and control SoundTouch® from your smartphone,

tablet or computer. Using the app, your smart device acts as a remote for your ampliﬁer.

From the app, you can manage your SoundTouch® settings, add music services, explore

local and global Internet radio stations, set and change presets and stream music. New

features are added periodically.

Note: If you have already set up SoundTouch® for another speaker, see page 16.

Download and install the SoundTouch

®

app

On your smartphone or tablet, download the Bose® SoundTouch® app.

• Apple users: download from the App Store

• Android™ users: download on the Google Play™ store

• Amazon Kindle Fire users: download from the Amazon Appstore for Android

Follow the instructions in the app to complete setup, including adding the ampliﬁer to

your Wi-Fi network, creating a S oundTouch® account, adding a music library and using

music services.

Note: For instructions on using a computer for setup, see page 32.

Tip: Once you set up the ampliﬁer on your home Wi-Fi network, you can control it from

any smartphone or tablet on the same network. Download the SoundTouch® app

on the smart device. You must use the same SoundTouch® account for all devices

connected to your ampliﬁer.

SoundTouch

®

Owner’s Center

global.Bose.com/Support/SA5

This website provides access to the owner support center, which includes: owner’s

manuals, articles, tips, tutorials, a video library, and the owner community where you

can post questions and answers.

16 - ENGLISH

EXISTING SOUNDTOUCH® USERS

Add the ampliﬁer to an existing account

If you have already set up SoundTouch® on another speaker, you do not need to

download the SoundTouch® app again.

From within the app, select > Settings > Add or Reconnect Speaker.

The app guides you through setup.

Connect the ampliﬁer to a new network

If your network information changes, add your ampliﬁer to your new network. You can

do this by putting your ampliﬁer into setup mode.

1. From within the app, select > Settings > Speaker Settings and select

your ampliﬁer.

2. Select CONNECT SPEAKER.

The app guides you through setup.

ENGLISH - 17

PRESET PERSONALIZATION

You can personalize six presets to your favorite streaming music services, stations,

playlists, artists, albums or songs from your music library. You can access your music, at

any time, with a simple touch of a button using the SoundTouch® app.

Before using presets, note the following:

• You can set presets from the app and the remote control.

• If the preset source is your music library, make sure the computer storing your music

library is on and connected to the same network as the SoundTouch® ampliﬁer.

• You cannot set presets in Bluetooth mode or AUX mode.

Set a preset

1. Stream music using the app.

2. While the music is playing, press and hold a preset in the app.

Play a preset

Once you personalize your presets, press a preset in the app to play it.

18 - ENGLISH

BLUETOOTH TECHNOLOGY

Bluetooth wireless technology lets you stream music from Bluetooth smartphones,

tablets, computers or other devices to your ampliﬁer. Before you can stream music from

a mobile device, you must connect the mobile device to your ampliﬁer.

Connect your mobile device

1. From within the app, select your ampliﬁer from the device tray.

2. Select Bluetooth .

3. Select CONNECT.

4. Select your SoundTouch® ampliﬁer from the mobile device list.

Tip: Look for the name you entered for your ampliﬁer in the SoundTouch® app. If

you didn’t name your ampliﬁer, the default name appears.

Once connected, your SoundTouch® ampliﬁer’s name appears connected in the

device list.

Disconnect a mobile device

Turn o the Bluetooth feature on your mobile device.

ENGLISH - 19

BLUETOOTH TECHNOLOGY

Connect using the Bluetooth feature on

your mobile device

1. On your mobile device, turn on the Bluetooth feature.

Tip: The Bluetooth menu is usually found in the Settings menu.

2. Select your ampliﬁer from the mobile device list.

20 - ENGLISH

AMPLIFIER COMPONENTS

Connectors

Computer setup

Terminal connectors

Ethernet

RCA stereo

connectors

3.5 mm

connector

Connector Description

AC power cord connector. Power is applied when the power cord is

inserted and plugged into an AC (mains) outlet. There is no on/o

switch on the SoundTouch® ampliﬁer.

SETUP USB connector for setup using a computer.

Ethernet connector enables wired access to your home network.

SPEAKERS OUT Two terminal block connectors enable you to connect two pairs

of speakers.

AUX IN Three AUX IN connectors enable playback from audio devices and

media players.

ページが読み込まれています...

Bose SA5 取扱説明書

このマニュアルも適しています

Bose SA5 取扱説明書

他の言語で

関連論文

その他のドキュメント