Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR II 取扱説明書

  • こんにちは!Nikon AF-S NIKKOR 70-200mm f/2.8G ED VR II レンズの使用説明書を読み終えました。レンズの機能、使用方法、お手入れ方法など、あらゆる疑問にお答えできますので、お気軽にご質問ください。例えば、手ブレ補正機能の使い方や、対応するカメラ機種についてなど。
  • 手ブレ補正機能はどのように使用しますか?
    レンズの清掃方法は?
    三脚座はどのように使用しますか?
    最短撮影距離は?
    使用できるカメラは?
© 2009 Nikon Corporation
No reproduction in any form of this manual, in whole or in part
(except for brief quotation in critical articles or reviews), may be
made without written authorization from NIKON CORPORATION.
Printed in Japan
7MAA61F4-03
TT5C03(F4)
AF-S NIKKOR 70-200mm f/2.8G ED VR
P. 2
Pg. 14
S. 26
P. 38
P. 50
S. 62
CTP.74
P. 86
P. 98
ΣΕΛ. 110
STR.122
STR 134
P. 146
P. 156
P. 168
AF-S NIKKOR 70-200mm f/2.8G ED VR
Sc
Gr
Tc
Εγχειρίδιο οδηγιών χρήσης
Návod k obsluze
Užívateľská príručka
Avis pour les clients en France
LE PRODUIT ET SON EMBALLAGE RELÈVENT D’UNE CONSIGNE DE TRI
2
Jp
3
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
&
*
(
)
q
w
e
r
t
y
u
4
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
5
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
6
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
a
b
c
7
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
8
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
9
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
10
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
11
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
12
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
13
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
14
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Notes on Safety Operations
CAUTION
Do not disassemble
Touching the internal parts of the camera or lens could result in injury.
Repairs should be performed only by qualified technicians. Should the
camera or lens break open as the result of a fall or other accident, take
the product to a Nikon-authorized service representative for inspection
after unplugging the product and/or removing the battery.
Turn off immediately in the event of malfunction
Should you notice smoke or an unusual smell coming from the camera
or lens, remove the battery immediately, taking care to avoid burns.
Continued operation could result in injury.
After removing or disconnecting the power source, take the product to
a Nikon-authorized service representative for inspection.
Do not use the camera or lens in the presence of
flammable gas
Operating electronic equipment in the presence of flammable gas could
result in an explosion or fire.
Do not look at the sun through the lens or viewfinder
Viewing the sun or other strong light sources through the lens or
viewfinder could cause permanent visual impairment.
Keep out of reach of children
Particular care should be taken to prevent infants from putting the
batteries or other small parts into their mouths.
Observe the following precautions when handling the
camera and lens
• Keep the camera and lens unit dry. Failure to do so could result in fire
or electric shock.
• Do not handle or touch the camera or lens unit with wet hands.
Failure to do so could result in electric shock.
• When shooting with back-lighting, do not point the lens at the sun
or allow sunlight to pass directly down the lens as this may cause the
camera to overheat and possibly cause a fire.
• When the lens will not be used for an extended period of time, attach
both front and rear lens caps and store the lens away from direct
sunlight. Failure to do so could result in a fire, as the lens may focus
sunlight onto a flammable object.
15
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Nomenclature
 

* 0
-
2
.
+
1
Lens hood mounting index (P. 22)
2
Rubber grip
3
Focus ring (P. 18)
4
Distance scale (P. 21)
5
Distance index line
6
Zoom ring (P. 21)
7
Focal length scale
8
Focal length scale index line
9
Tripod collar ring rotating index (P. 21)
0
Position indexes (90˚) (P. 21)
!
Tripod collar ring (P. 21)
@
Mounting index
#
Lens mount rubber gasket (P. 24)
$
CPU contacts (P. 24)
%
Lens hood (P. 22)
^
Lens hood setting index (P. 22)
&
Lens hood attachment index (P. 22)
*
Lens hood lock release button (P. 23)
(
Focus mode switch (P. 18)
)
Focusing limit switch (P. 19)
q
Vibration reduction ON/OFF switch (P. 20)
w
Vibration reduction mode switch (P. 20)
e
Tripod collar ring fastening screw (P. 21)
r
Tripod collar lock release lever (P. 22)
t
Tripod collar mounting foot (P. 21)
y
Tripod collar lock screw (P. 21)
u
Tripod collar (P. 21)
( ): reference page
16
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Thank you for purchasing the AF-S NIKKOR 70-200mm f/2.8G ED VR
lens. Before using this lens, please read these instructions and refer to
your camera's User's Manual.
Major features
The Nano Crystal Coat deposited on some of the lens elements ensures
that fine, clear images can be reproduced under various shooting
conditions, from the sunny outdoors to spotlighted interior scenes.
• By enabling vibration reduction, slower shutter speeds (3.5 stops*)
can be used, thus increasing the range of usable shutter speeds and
zoom positions, particularly when hand-holding the camera. (*The
effects of VR on shutter speed are measured according to Camera
and Imaging Products Association (CIPA) standards; FX-format lenses
are measured using FX-format digital cameras, DX-format lenses using
DX-format cameras. Zoom lenses are measured at maximum zoom.)
• Two vibration reduction modes are available: (1) the NORMAL mode
for reducing camera shake, and (2) the ACTIVE mode for reducing
strong camera shake such as when taking pictures from a moving
vehicle. Vibration reduction is also effective for panning, as the lens
automatically distinguishes panning from camera shake to enable
vibration reduction to work effectively (in NORMAL mode).
This lens employs a Silent Wave Motor to drive the focusing mechanism,
making autofocusing smooth, silent and almost instantaneous. The focus
mode switch is provided for simple selection of autofocus (AF) or manual
focus (MF) operation.
Autofocus can be overridden by setting the focus mode switch to A/M or
M/A and manually focusing with the focus ring.
• Superior optical performance and rendering characteristics are
maximized with the use of seven extra-low dispersion (ED) glass
elements, which ensure correction of chromatic aberration. In
addition, the rounded aperture produces soft and pleasing blur
characteristics in picture areas that are out of focus.
Up to four Wireless Remote Speedlight SB-R200s can be mounted on
the edge of the lens.
AF-I/AF-S Teleconverters TC-14E/TC-14E /TC-14E /TC-17E /TC-20E/
TC-20E
/TC-20E are usable. Even when a teleconverter is attached,
both vibration reduction and autofocus functions work properly.
Important
• When mounted on Nikon DX format digital SLR cameras, such as the
D300-Series and D7000, the lens’ picture angle becomes 22°50’-8° and
its 35mm equivalent focal length is approx. 105-300mm.
17
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Usable cameras and available functions
There may be some restrictions or limitation for available functions. Refer to
camera's User's Manual for details.
Cameras
Function
Exposure
mode
VR AF P
*1
SAM
Nikon digital SLR (Nikon FX/DX format)
cameras, F6, F5, F100, F80-Series/
N80-Series*, F75-Series/N75-Series*,
F65-Series/N65-Series*
3 3 3333
Pronea 600i/6i*, Pronea S*
2
33333
F4-Series, F90X/N90s*, F90-Series/N90*,
F70-Series/N70*
333
——
F60-Series/N60*, F55-Series/N55-Series*,
F50-Series/N50*, F-401x/N5005*,
F-401s/N4004s*, F-401/N4004*
——
3333
F-801s/N8008s*, F-801/N8008*,
F-601
M/N6000*
——
33
——
F3AF, F-601/N6006*, F-501/N2020**,
Nikon MF cameras (except F-601
M/N6000*)
————
3: Possible
: Not possible VR: Vibration reduction AF: Autofocus
*: Sold exclusively in the USA
**: Sold exclusively in the USA and Canada
*1: P includes AUTO and Vari-Program System.
*2: Manual (M) is not available.
If this lens is used with cameras that do not have the vibration
reduction function, set the vibration reduction ON/OFF switch to OFF.
With the Pronea 600i/6i camera, in particular, battery power may
become quickly depleted if this switch is left ON.
18
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Focusing
Set your camera’s focus-mode selector according to the chart below:
Cameras
Camera
focus
mode
Lens’ focus mode switch
A/M M/A M
Nikon digital SLR (Nikon
FX/DX format) cameras,
F6, F5, F4-Series,
F100, F90X/N90s*,
F90-Series/N90*, F80-Series/
N80-Series*, F75-Series/
N75-Series*, F70-Series/N70*,
F65-Series/N65-Series*,
Pronea 600i/6i*, Pronea S
AF
Autofocus
with
manual
override
(AF
priority)
Autofocus
with
manual
override
(MF
priority)
Manual
focus
(Electronic
rangefinder
can be
used.)
MF
Manual focus
(Electronic rangefinder can be
used.)
F60-Series/N60*,
F55-Series/N55-Series*,
F50-Series/N50*,
F-801s/N8008s*,
F-801/N8008*,
F-601
M/N6000*,
F-401x/N5005*,
F-401s/N4004s*,
F-401/N4004*
AF
MF
Manual focus
(Electronic rangefinder can be used,
except with the F-601
M/N6000*.)
* Sold exclusively in the USA
AF: Autofocus MF: Manual focus
A/M (Autofocus with manual override. AF priority) mode and
M/A (Autofocus with manual override. MF priority) mode
M/A: Autofocus can be overridden by manually focusing
with the focus ring.
A/M: Autofocus can be overridden by manually focusing
with the focus ring, but focus ring detection
sensitivity is lower than in M/A mode. Use this
mode to avoid canceling the AF setting by
unintentionally moving the focus ring.
a
Set the focus mode switch to A/M or M/A.
b
You can manually override autofocus by operating the focus ring
while pressing the shutter release button halfway down or the AF-
ON button on the camera.
c
Pressing the shutter release button halfway down or pressing the
AF-ON button on the camera again will cancel manual override and
return to autofocus mode.
19
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
To limit the range of autofocus
This function is only available with autofocus.
With AF operation, if the subject is always more than
5 m (16.4 ft) away, set the focusing limit switch to
–5m to reduce focusing time.
If the subject is sometimes 5 m (16.4 ft) or closer, set it
to
FULL.
Vibration reduction mode
Basic concept of vibration reduction
Strength of vibrations
Strong
Weak
Set the vibration reduction mode switch to NORMAL.
Panning shots
Camera shake
Set the vibration reduction mode switch to ACTIVE.
Number of vibrations
Low
High
Strong
camera shake
when taking pictures
from a moving
vehicle
When taking pictures Set the vibration reduction mode switch
to either NORMAL or ACTIVE.
When taking panning shots Set the vibration reduction mode switch
to NORMAL.
When taking pictures from a
moving vehicle
Set the vibration reduction mode switch
to ACTIVE.
20
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
Setting the vibration reduction ON/OFF switch
ON: Vibration is reduced while the shutter-release
button is pressed halfway and also at the instant
the shutter is released. Because vibration is
reduced in the viewfinder, auto/manual focusing
and exact framing of the subject are easier.
OFF: Vibration is not reduced.
Setting the vibration reduction mode switch
First, set the vibration reduction ON/OFF switch ON, then select the
following mode:
NORMAL:
The vibration reduction mechanism primarily
reduces camera shake, making smooth
panning shots possible.
ACTIVE: The vibration reduction mechanism reduces
more noticeable camera shake, such as that
which occurs when taking pictures from a
moving vehicle. In this mode, the lens does
not automatically distinguish panning from
camera shake.
Notes on using vibration reduction
• After pressing the shutter-release button halfway, wait until the image
in the viewfinder stabilizes before pressing the shutter-release button
the rest of the way down.
• Due to the characteristics of the vibration reduction mechanism, the
image in the viewfinder may be blurred after the shutter is released.
This is not a malfunction.
• When taking panning shots, be sure to set the vibration reduction
mode switch to
NORMAL. If the camera is panned in a wide arc,
compensation for camera shake in the panning direction is not
performed. For example, when panning the camera in a horizontal
direction, vertical camera shake is reduced. This stabilizes the image
whilst allowing the desired panning effect to be realized.
• Do not turn the camera off or remove the lens from the camera while
vibration reduction is operating. Failure to observe this note could
result in the lens sounding and feeling as if an internal component is
loose or broken when it is shaken. This is not a malfunction. Turn the
camera on again to correct this.
• With cameras featuring a built-in flash, vibration reduction does not
function while the built-in flash is charging.
/