HZ-350
Haze Machine
User Manual
- English
-中文
© 2023 Antari Lighting and Effects Ltd.
1. Introduction ................................................................................................................................................. 1
2. Safety Information ....................................................................................................................................... 1
3. Package Contents & Inspection ................................................................................................................... 2
4. Machine Details ........................................................................................................................................... 3
5. Technical Label Information ........................................................................................................................ 3
6. Fog Fluid...................................................................................................................................................... 3
7. Setting and Manual Operation ..................................................................................................................... 4
8. Control Settings ........................................................................................................................................... 4
9. DMX Connection ........................................................................................................................................ 5
10. W-1 Wireless Transmitter (Standard) .......................................................................................................... 6
11. HC-1 Cable Remote (Optional) ................................................................................................................... 6
12. Technical Specifications .............................................................................................................................. 7
13. Warranty Disclaimer .................................................................................................................................... 7
14. Machine Dimension ..................................................................................................................................... 7
1. 前言 ............................................................................................................................................................. 8
2. 安全注意事項 ............................................................................................................................................. 8
3. 包裝內容與檢查 ......................................................................................................................................... 9
4. 機器訊息 ................................................................................................................................................... 10
5. 技術標籤資訊 ........................................................................................................................................... 10
6. 煙霧水 ....................................................................................................................................................... 10
7. 設定與手動操作說明 ................................................................................................................................ 11
8. 控制設定 .................................................................................................................................................... 11
9. DMX 說明 ................................................................................................................................................. 12
10. W-1 無線發射器(標準) ............................................................................................................................. 13
11. HC-1 有線定時控制器(選配) ................................................................................................................... 13
12. 技術規格 ................................................................................................................................................... 14
13. 保固聲明 ................................................................................................................................................... 14
14. 機器尺寸圖 ............................................................................................................................................... 14
Appendix I Grounding Instruction .................................................................................................................... 15
1
User Manual
1. Introduction
Please read all the user manual before operating the machine, and place the manual where the user can refer to it at
all time. The manual includes how to install and operate the machine under safe conditions and explain all the labels
printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.
2. Safety Information
DANGER
If the danger is not avoided, it will cause death or serious injury
WARNING
If the warning is not heeded, it can cause death or serious injury.
CAUTION
If the precaution is not taken, it may cause minor or moderate injury.
DANGER
Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may
cause serious consequences.
Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of
electrocution. For grounding instruction, please refer to Appendix I on page 15.
Do not operate the machine with a bundled power cord, it could lead to a fire hazard.
When operating the machine, do not point at people, animals, or fire.
WARNING
Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space
around the machine and make sure there is no flammable gas or material nearby.
Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock
or result in fire.
The machine can only be operated by adults or professionals, is not intended for use by person with reduced
physical sensory, mental capabilities, or lack of experience and knowledge including children.
Do not leave the machine running unattended, make sure all powers are off when leaving.
Children should be supervised to ensure that they do not play with the machine.
Do not use the machine upside down or tilt it, it might cause damages or malfunction.
Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.
In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.
CAUTION
Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain or
moisture environment.
Please make sure the power outlet is not damaged or loose before plug in the power cord.
If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be
void.
Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using
original package)
2
The machine is for indoor use only.
Do not operate the machine in any area with unstable voltage.
If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately
and contact your local Antari dealer for assistant.
Do not contact any moving part.
Only use accessories recommended or sold by Antari.
Please make sure the power is off when not using the machine and unplug the power cord if not intend to use
for a long period of time.
To disconnect, turn all controls to the off position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Unplug from outlet before servicing or cleaning.
Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or
damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid
or additive, otherwise it may cause malfunction.
Before operating the machine, please read all warning labels on the machine, description as below;
Top Cover Printing
USE DEALER RECOMMENEDED HAZE LIQUID ONLY!
DO NOT OPEN CASE RISK OF ELECTRIC SHOCK
WARNING!
PLEASE USE RECOMMENED, NON-FLAMMABLE FLUID ONLY. MAKE SURE THT THE LIQUID
LEVEL DOES NOT EXCEED THE MARK AS MACHINE PERFORMANCE MAY SUFFER
Rear Cover Printing
WARNING!
DISCONNECT POWER BEFORE CHANGING FUSE.
USE ONLY WITH ADULT SUPERVISION.
DO NOT OPERATE WITHOUT LIQUID.
FOR INDOOR USE ONLY. KEEP DRY.
NO USER SERVICEABLE PARTS INSIDE.
MAX. FLUID LEVEL
MAKE SURE THAT THE LIQUID LEVEL DOES NOT EXCEED THIS MARK.
3. Package Contents & Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct
model and all parts are included. If any part appears to be damaged or missing during transportation, please contact
your local dealer and return in original package for inspection.
3.1 Package Contents
1 x HZ-350 Haze Machine
1 x IEC Connector (Power)
1 x W-1 Wireless Transmitter
1 x User Manual or scan QR Code on the Machine
3.2 Optional Accessories
Item Code
Description
HC-1
Timer Cable Remote
3
4. Machine Details
01. Fog Nozzle
06. Wireless Receiver
02. Handle
07. XLR 5-Pin DMX
03. Tank Cap
08. Remote Input
04. Fan
09. Power Switch
05. LCD Display
10. IEC Connector (Power)
5. Technical Label Information
Please read the technical label information on the back of the machine before operating it.
1. Model Name
5. Breaker/Fuse
2. Input Voltage
6. QR CODE for User Manual
3. Frequency
7. Serial No.
4. Rated Power
6. Haze Fluid
CAUTION
Always turn off the power before filling the fluid tank. Do not add flammable
liquid to the fluid tank. If fluid gets inside the machine, please contact your local
Antari dealer for assistant.
Only the haze fluid manufactured by Antari can be used, do not mix or dilute the haze fluid. Due to improper
storage or using other fluid might cause malfunction.
The machine is tested and calibrated with the specific haze fluid to get the best performance.
Please empty the fluid in the tank before switching to another fluid to avoid mixing.
The warranty on your haze machine will be void if you use haze fluid not manufactured by Antari.
4
7. Setting and Manual Operation
WARNING
Machine falling off might cause serious injury, please make sure it is secure
and firm on the overhead.
Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open
space around the machine, and make sure there is no flammable gas or material nearby;
Step 2. Fill with Antari approved haze fluid;
Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and
make sure the power outlet is the correspond to the rated voltage for the machine;
Step 4. Turn on the machine, once the machine is ready for operation, the LCD display will show “Ready To
Haze”;
Step 5. To start hazing, press [TIMER] once and to stop hazing, press [STOP], this will run based on “interval” &
“duration” setting in the main menu;
Step 6. To start hazing, you can also press [ON] button once and to stop hazing, press [STOP];
Step 7. To turn off the machine, please make sure the machine is not operating then turn of the power. If you will
not use the machine a long period of time, please remove the power cord.
8. Control Settings
HZ-350 Haze Machine can be operated in the following modes. The machine can only accept 1 type of signal at a
time. When using different control modes at the same time, the machine will work according to built-in control
priority:
Manual
Timer
DMX512
Wireless
Cable Remote
8.1 Control Panel Description
HZ-350 Haze Machine can be operated with the onboard digital control interface.
Ready To
Haze
5
Button
Operating Method
Action
Menu
Press
To enter setting menu
Up
Press
Increase value
Down
Press
Decrease value
Press
1. Press to start hazing according to the set time
2. Press “stop” to stop hazing
Press
1. Press to start hazing
2. Press “stop” to stop hazing
Stop
Press
1. Press once to choose function in set menu
2. Leave setting menu
3. Stop hazing
8.2 Menu Options Description
Options
Description
Interval
Set Interval between 5-200 sec
Duration
Set Duration between5-200 sec
DMX512 Add.001
001-512
Wireless On
On (“W” Showed) / Off (“W” not show) “Ready to Haze Sceen”
Quick Start
On / Off
9. DMX Connection
9.1 DMX Connector Pin Assignment
The machine has a XLR 5-Pin for DMX connection. The diagram below indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
4
N/A
5
N/A
** There is a protection cap on DMX IN, please
remove it with your finger before operation.
6
9.2 DMX Channel Function
DMX Value
Function
0~10
Off
11~255
On
10. W-1 Wireless Transmitter (Standard)
W-1 Wireless Transmitter is a standard accessory for HZ-350 Hazer Machine and it’s ready to use.
10.1 W-1 Wireless Transmitter
Battery：27A 12V
Effective Range：The effective range is approximately 50m,
depends on actual condition, it may vary.
W-1 wireless transmitter has 2 buttons, each function as follow:
W-1 Wireless Transmitter
Button
Function
[A]
Start
[B]
Stop
10.2 Pairing
Each receiver can pair up to 5 transmitters, please follow the steps below to pair;
Step 1. Turn on the power, “Wireless Setup” will show on the display for 15 seconds. Within this time period,
press button A on the W-1 transmitter to pair with the machine. When screen shows “Wireless Setup
OK”, means it’s paired;
Step 2. Please repeat Step 1 to pair multiple transmitters;
*If exceed 15 seconds, turn the power off and on again.
11. HC-1 Cable Remote (Optional)
HC-1 Timer Cable Remote is an optional accessory for HZ-350 Haze Machine, please see instruction below;
Button/Knob
Function
DURATION [KNOB]
Adjust Duration
INTERVAL [KNOB]
Adjust Interval
POWER [RED BUTTON]
Power On / Off
HAZE [GREEN BUTTON]
Fogging On / Off
TIMER ON/OFF [YELLOW BUTTON]
Timer Mode On / Off
** If you encounter any problem, please contact your local Antari dealer for assistant.
7
12. Technical Specifications
HZ-350
Input Voltage
US Model : AC 100-120V, 50/60Hz 3.5A
EU Model : AC 220-240V, 50/60Hz 2.0A
Rated Power
390W
Fluid Consumption
0.8 ml/min (100% output)
Operating Time
52 hrs (100% output)
Fluid Tank Capacity
2.5 Liters (0.66 gallon)
Compatible Fluid
Antari HZL Haze Fluid
Ambient Temp. Range
0°C – 40°C (32°F – 104°F)
Control Methods
Manual、Timer、DMX512、Wireless (Standard)、Cable Remote (Optional)
Interface
XLR 5-Pin (DMX)、IEC (Power)
DMX Channels
1 Channel
Included Accessories
W-1 Wireless Transmitter
Optional Accessories
HC-1 Timer Cable Remote
Dimension
L 492 W 273 H 315 mm (L 19.37 W 10.75 H 12.40 inch)
Weight
14.2 kg (31.31 lbs.)
13. Warranty Disclaimer
We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period
of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our
factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any
purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise
which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its
performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated
contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in
connection with the use, sale, or repair of any merchandise purchased from us.
14. Machine Dimension
8
中文使用說明書
1. 前言
在操作本機器之前，請務必仔細詳閱本說明書然後請將本說明書放置在機器使用者可隨時查閱之處存放。
此說明書包含如何安全的安裝及操作本機器以及說明所有在機器上的標示。如果您有任何操作上的問題，
請立即聯繫當地的 Antari 經銷商尋求協助。
2. 安全注意事項
危險
若不確實避免這些指示，可能導致嚴重人身傷害甚至死亡。
警告
若不確實遵循這些指示，可能導致嚴重人身傷害甚至死亡。
注意
若不確實注意這些指示，可能導致人身傷害甚至死亡，嚴重程度視情況而定。
危險
請務必使用正確電壓。如果使用錯誤電壓，可能會遭受危險的電擊燒傷或更嚴重的後果。
請務必將機器連結到有保護的電路，並確保有正確地接地，以避免觸電的危險。關於接地方式請參考
第15 頁附錄 I。
請勿在捆綁電源線的情況下使用，可能會發熱導致火災。
操作機器時請 勿 將 機 器 對 著 人 體 、動物或火 焰使用。
警告
請於堅固、平坦、穩定且通風良好的表面上使用機器。請勿遮蓋機器散熱部份，機器周邊至少應保留
50 公分的空間並確認附近沒有易燃性物質或可揮發性氣體。
請勿隨意拆卸、修理或改造機器，這可能會導致機器故障、損壞、觸電危險或造成火災。
本機器僅限有行為能力之成人或專業人員操作，不預期提供生理、感知、心智能力、經驗或知識不足
者之使用者(包含孩童)使用本機器。
請勿在無人看管時讓機器運作，並 於 外 出 離 去 時 確 實關閉 電 源 。
孩童應受監督，以確保孩童不能操作或嬉戲玩本機器。
請勿將機器倒放或傾斜使用，可能導致機器動作不正常或損壞。
請將液體存放在室內孩童無法取得之處，保持通風及避免陽光直射。如果有觸碰眼睛或誤食機器，請
立即尋求醫生的協助。
注意
本機器無防水設計，請隨時保持機器乾燥，嚴禁將其潑水、浸水、淋雨或放在潮溼的環境。
在插 入 電 源 插 座前 ，請確認電 源 插 座無損壞或鬆動。
若電源線損壞，必須使用原廠電源線或組件進行更換，否則將導致保固無效。
9
在運輸本機器前，請確認機器的油箱已清空並且包裝完整。(建議使用原廠包裝)
本產品僅限室內使用。
請勿在電壓不穩定的地區使用本機器。
如果機器出現異常聲音或有任何不正常現象時，請立即停止工作，將電源關閉及拔下機器電源線，並
請聯繫當地的 Antari 經銷商尋求協助。
請勿觸碰機器內部運轉零件。
只能使用原廠建議或販售之配件。
請確認機器不在使用的狀態下電源已關。如果長時間不使用機器，請拔掉電源線。
關閉機器時，將所以控制開關轉到關閉的位置，然後再將插頭從插座拔除。
拔除電源線時，請抓住插頭不是電線。
在保養及清潔前，請把電源線從插座拔除。
在電線或插座有損毀、機器故障或有掉落或損壞的情形發生時，請勿操作機器。請將機器送回最近的
維修站，做檢查、維修及電源或機械的調整。
為確保機器的使用壽命，請使用 Antari 原廠製造之煙霧水，勿使用其它非 Antari 原廠製造煙霧水或添
加劑，否則可能會導致故障。
在使用本機之前，請詳細閱讀機器上的警語標示，說明如下：
上蓋印刷
USE DEALER RECOMMENEDED HAZE LIQUID ONLY! 只限使用原廠建議煙霧水
DO NOT OPEN CASE RISK OF ELECTRIC SHOCK 請勿打開上蓋避免觸電危險
WARNING! 警告!
PLEASE USE RECOMMENED, NON-FLAMMABLE FLUID ONLY. MAKE SURE THT THE LIQUID
LEVEL DOES NOT EXCEED THE MARK AS MACHINE PERFORMANCE MAY SUFFER
請使用建議非易燃液體. 確保液體不會超出此標線避免影響機器性能
後蓋印刷
WARNING! 警告!
DISCONNECT POWER BEFORE CHANGING FUSE. 更換保險絲前請務必斷開電源
USE ONLY WITH ADULT SUPERVISION. 僅在成人監督下使用
DO NOT OPERATE WITHOUT LIQUID. 請勿在沒有液體的情況操作本機台
FOR INDOOR USE ONLY. KEEP DRY. 僅限室內使用 請保持乾燥
NO USER SERVICEABLE PARTS INSIDE. 內部無使用者可維修之零配件
MAX. FLUID LEVEL 液體最高高度
MAKE SURE THAT THE LIQUID LEVEL DOES NOT EXCEED THIS MARK. 確保液體不會超出此標
線
3. 包裝內容與檢查
在收到機器後，請立即小心地打開包裝紙箱，檢查所有內容，確認您所購買的機型及配件。如果有任何部
件因運輸過程出現損壞或缺少，請立即連絡經銷商，並以原包裝退回檢查。
3.1 包裝內容
1 x HZ-350 薄霧型特效煙機
1 x IEC 電源線
1 x W-1 無線發射器
1 x 說明書或掃描機身 QR CODE
10
3.2 選配說明
品項
描述
HC-1
有線定時控制器
4. 機器訊息
01. 噴煙口
06. 無線接收器
02. 把手
07. XLR 5-Pin DMX 連接頭
03. 油桶蓋
08. 有線控制器接頭
04. 風扇
09. 電源開關
05. 液晶顯示器
10. IEC 電源線連接頭
5. 技術標籤資訊
使用本機器前，請詳閱技術標籤上的訊息
1. 機器型號
5. 斷路器/保險絲
2. 工作電壓
6. 說明書 QR CODE
3. 頻率
7. 機器流水序號
4. 瓦特數
6. 煙霧水
危險
將液體加入機器之前，請務必先拔除電源線。請勿添加易燃液體。如果發現液體
流入機器內部，請洽 Antari 原廠或其經銷商尋求協助。
僅能使用 Antari 原廠製造之煙霧水，不可混用或稀釋。若因保存不當而變質或使用非原廠煙霧水，將
可能造成機器故障。
本機器是使用專屬的煙霧水做測試與校正來取得最佳的效能。
如需更換另一種液體，請在使用前，先將油桶中的液體清空，以避免混合。
11
如果使用非原廠製造之煙霧水而導致煙霧機損壞將不在保固範圍內。
7. 設定與手動操作說明
警告
機台掉落可能會造成嚴重傷害，請確保本機台安裝牢固且不會掉落。
步驟1. 將機器平放在堅固、平坦、穩定且通風良好的表面上，機器周圍至少應保留 50 公分的空間並確
認附近沒有易燃性物質或可揮發性氣體;
步驟2. 使用 ANTARI 原廠專用煙霧水注入機器;
步驟3. 將機器連接電源，連接之前，確認機器背後技術標籤上所標示要求功率，是否與電源插座相符;
步驟4. 啟動機器電源後，當機器已經準備好可進行操作時，螢幕會顯示“Ready to Haze”;
步驟5. 欲開始噴煙，按一下控制面板上的[TIMER]；停止噴煙，請按一下控制面板上的[STOP]，這會
按照設定的“間隔時間” & “持續時間”來運轉;
步驟6. 或欲開始噴煙，按一下控制面板上的[ON]；停止噴煙，請按一下控制面板上的[STOP];
步驟7. 需關閉本機時，請確認機器已停止運轉，再將電源開關關閉即可，長時間不使用時請移除電源
線。
8. 控制設定
HZ-350 薄霧型特效煙機可以使用下列操作模式，機器每次接受一種訊號。當同時間使用多種訊號時機器
將根據原廠內建訊號的優先順序來進行工作:
手動控制
定時控制
DMX512
無線控制
有線控制
8.1 控制面板說明
HZ-350 薄霧型特效煙機可以使用機器上的數位控制面板來操作。
按鈕
操作方式
動作
選單
按
進入設置選單
Ready To
Haze
12
上
按
增加數值
下
按
減少數值
定時模式
按
1. 按一下根據設定時間啟動噴煙
2. 按一下”停止”停止噴煙
啟動模式
按
1. 按一下啟動噴煙
2. 按一下”停止”停止噴煙
停止/確認
按
1. 按一下確認設定
2. 離開設置選單
3. 停止噴煙
8.2 選單說明
選單
敘述
Interval Set (間隔設定)
設定間隔時間 5 – 200 秒
Duration Set (持續時間設定)
設定輸出時間 5 – 200 秒
DMX512 Add.
001 - 512
Wireless ON (無線功能)
開啟(W 顯示在螢幕) / 關閉(W 未顯示在螢幕) “Ready to Haze 畫面”
Quick Start (迅速啟動)
開啟 / 關閉
9. DMX 說明
9.1 接點說明
本機器提供一個 XRL 5-Pin 的DMX 連接頭。PIN 的接點說明如下：
Pin
功能
1
接地
2
數據-
3
數據+
4
NA
5
NA
**DMX IN 連接頭上有一個保護蓋，操作前，請
用手指撥開即可將其取下。
9.2 DMX 通道功能
本機器提供一種 DMX 通道模式可供選擇，請參考下方表單。
13
DMX 數值範圍
功能
0~10
關閉
11~255
開啟
10. W-1 無線發射器(標配)
W-1 無線發射器此為 HZ-350 薄霧機特的標準配件。
10.1 W-1 無線發射器說明
發射器：使用 27A 12V 電池
收發距離：有效距離為 50 公尺，實際收訊狀況根據現場環境
因素而有所不同。
W-1 無線發射器配有 2個按鈕，控制功能為：
W-1 無線發射器
按鈕
功能
[A] 鍵
啓動
[B] 鍵
停止
10.2 配對
每個接收器可以配對最多五個發射器，請參考下列步驟進行配對。
步驟 1：當開啟機器電源後，”Wireless Setup”會在液晶螢幕上顯示約 15 秒鐘。在這時間內按下發射器上的
A鈕進行配對，配對成功後會顯示”Wireless Setup OK”;
步驟 2：如果要配對多個無線發射器，然後重複步驟 1即可。
*如果超過 15 秒鐘，將機器關閉重新開啟即可。
11. HC-1 有線定時控制器(選配)
HC-1 有線定時控制器是 HZ-350 薄霧機的選購配件。
按鈕/旋鈕
功能
DURATION[旋鈕]
調整輸出時間
INTERVAL[旋鈕]
調整間隔時間
POWER[紅色按鈕]
電源 開/關
HAZE[綠色按鈕]
開始/停止噴煙
TIMER ON/OFF[黃色按鈕]
定時模式 開/關
**如果有任何問題，請聯繫當地的 Antari 經銷商尋求協助。
14
12. 技術規格
HZ-350
電壓
美規 : AC 100-120V, 50/60Hz 3.5A
歐規 : AC 220-240V, 50/60Hz 2.0A
額定功率
390 瓦
耗油量
0.8 毫升/分鐘 (100%輸出)
運作時間
52 小時 (100%輸出)
油桶容量
2.5 公升(0.66 加侖)
適用煙霧水
Antari HZL 特效煙霧水
適用環境溫度
0°C – 40°C (32°F – 104°F)
控制方式
手動控制、定時控制、DMX 512、無線控制(標配)、有線控制(選配)
連接座
XLR 5-Pin (DMX)、IEC (主電源)
DMX 512 通道
1個頻道
隨附配件
W-1 無線發射器
選購配件
HC-1 有線定時控制器
尺寸
長 492 寬 273 高 315 公釐 (長 19.37 寬10.75 高 12.4 英寸)
重量
14.2 公斤 (31.31 磅)
13. 保固聲明
本公司保證我們的商品在一年內沒有材料和製作缺陷。我們在本保證下的義務和責任僅限於在原廠或當地
授權經銷商進行的維修或更換。我們對不當使用或用於非專門設計目的以外之用途不承擔任何責任。本保
固不適用於以任何方式在原廠或當地授權經銷商外修理、改動或組裝的任何商品，以便我們判斷影響其性
能，沒有受到誤用、疏忽或事故的影響，也沒有違反我們的任何商品操作印刷說明。本公司對於從我們這
邊購買的商品不會允許也不對於使用、銷售或修理任何產品有關的任何類型的任何損失或損害承擔責任。
14. 機器尺寸圖
15
Appendix I Grounding Instruction
This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-
grounding conductor. If repair or replacement of the cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal. Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to whether the appliance is properly grounded. Do not
modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120 V circuit, and has a grounding plug that looks like the plug illustrated in
sketch A in Figure. A temporary adaptor, which looks like the adaptor illustrated in sketches B and C, may be used
to connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by the metal
screw.
16
17
C08HZ3506
/