5
Perform Easy Setup
Do not insert a disc before performing the Easy Setup.
1. Insert batteries into the remote.
2. Insert the wireless transceivers into
both the main unit and surround
amplifier.
Firmly insert the wireless transceiver all the way
into the slot, as in the figure below.
Main unit
Surround amplifier
3. Connect the AC power cords of the
main unit, surround amplifier, and
your TV to the AC power outlet, and
then turn on the power of the main
unit and your TV.
將主機、環繞放大器與電視機的交流電
源線連接至交流電源插座,然後打開主
機與電視機的電源。
3
Connect your set-top box/
If you do not use a set-top box, skip this Step.
TV
This connection is
completed in Step 2.
Rear of the main unit
Set-top box
*Not supplied.
HDMI cable*
To enjoy set-top box sound, press FUNCTION repeatedly to select “HDMI1” or “HDMI2.”
若要欣賞機上盒聲音,反覆按FUNCTION鍵選擇“HDMI1”或“HDMI2”。
4
Connect to the network/
Wi-Fi connection is available. To use Wi-Fi, skip this Step.
可使用Wi-Fi連接。若要使用Wi-Fi,請跳過此步驟。
*Not supplied.
Internet
ADSL modem/cable modem
Broadband router
Rear of the main unit
LAN cable*
4. Switch the input selector on your TV
so that system screens like the ones
below appear on the TV screen.
切換電視機上的輸入選擇器,類似以下
畫面的系統螢幕便會出現在電視機螢幕
上。
“Easy Initial Settings” screen
Starting up
5. Perform system settings by following
the on-screen instructions in “Easy
Initial Settings” using
/
/
/
and
.
使用
/
/
/
和 ,依照“簡易初始
設置”中的畫面指示,執行系統設定。
/
/
/
,
6.
Perform network settings by following
the on-screen instructions in “Easy
Network Settings” using
/
/
/
and
.
使用
/
/
/
和 ,依照“簡易網路
設定”中的畫面指示,執行網路設定。
[Easy Network Settings are complete.] appears
when “Easy Network Settings” is complete.
“簡易網路設定”完成時,會出現[簡易網路設
定完成。]。
Basic setup is complete. Refer to the
supplied Operating Instructions for
details on how to enjoy disc playback
and many other features.
基本設定已完成。關於如何欣賞光碟播放
和許多其他功能的詳細資訊,請參閱提供
的使用說明書。
For further details on network settings, visit the following website and check the FAQ:
關於網路設定的詳細資訊,請參閱以下網站並查看常見問答集:
http://www.sony-asia.com/section/support