Escene WS118 Quick operation guide

カテゴリー
電話
タイプ
Quick operation guide

このマニュアルも適しています

WS118v4
IP 话机快速操作指
1
闭音键
LED 灯状态
描述
灭灯
闭音功能未生效
红色常亮
对应线路通话状态下,开启闭音功能
2
语音信箱
LED
灯状态
描述
灭灯
没有未读语音信息
红色常亮
有未读语音信
3 免提
LED 灯状态
描述
灭灯
未摘机或保持状态
红色常亮
摘机状态或通话状态
1-1
:支架调转后使用可挂墙。
步骤为按话机上 FLASH -> 系统置->输入级设密码(默
认为空)-> 网络->Wi-Fi 置-> 启用-> 确定。
步骤为按话机上 FLASH -> 系统置->输入级设密码(默
认为空)-> 网络->IP 设置-> 网络类型-> 确定。
步骤为按话机上 FLASH -> 系统置->输入级设密码(默
认为空)-> SIP 号-> 账号 1-> 启用-> 确定。
您可以摘机或按下免提来进行一个呼叫。
直接呼叫:直接拨打号码,然后按#
重拨:重拨以拨打最近一个拨出的号码
直接您可简单地摘一个呼叫应答然也可以
提键进行;
实现通话闭音:闭音(MUTE)
闭音通话按下闭音时对无法到闭的声音,
要恢复让对方听到,则再次按下音键,双方通话恢复正常。
1-2
如果您想保持一个通话,只需按下持键
如果您想恢复保持的通话,再按下持键则可恢复通话
您可以使用音量键调节不同状态的话机音量。
话机状
对应所调节音
待机状态
振铃铃声音
手柄摘机状
手柄听筒音
耳麦状态
耳麦输出音
您可以通过以下方式调节对应的麦克风输入音量:
登陆 WEB,选择“话机设置>“基本设置>音量设置”。
您可以在一个通话中邀请第三方进行三方会议通话
在通话过程中,按下会议拨打一个第三方号码,等第三方接通后,
再按下会议即可
会议超过三方时,可使用多个话机级联成一个多方会议进行通话
*更多的详细内容请参考本话机的用户手册。您也可以通过访问话机的
Web 页面来进行更详细的参数配置。
---------------------------------------------------------------------------------------------------
广州市亿景通信技术有限公司
地址:广州市天河区东圃镇黄村路 51 号粤安工业 C 4
网址:http://www.escene.cn
邮箱:suppo[email protected]
WS118v4
IP Phone Quick Operate Guide
Table 1 MUTE Button
LED Status
Description
Lighting-off
Toggles the Mute feature off.
Red, steady
Toggles the Mute feature on.
Table 2 VM Button
LED Status
Description
Lighting-off
No unread voice messages.
Red, steady
Have unread voice messages.
Table 3 Speaker Button
LED Status
Description
Lighting-off
Not to pick up or put a call on hold.
Red, steady
Pick up and enter normal call.
2-1
Tips: When turn around the bracket, it can wall-mounted.
Network: Press FLASH button > Choose System setting > Advanced
setting”> Enter the password required (The default is empty) > Choose
Wi-Fi Settings > Enable > Press Save soft key.
Network: Press FLASH button > Choose System setting > Advanced
setting”> Enter the password required (The default is empty) > Choose IP
Settings > Choose Network”> Press Save soft key.
SIP Account: Choose System setting > Advanced setting> Enter the
password required (The default is empty) > Choose SIP Accounts > SIP
account 1 > Enable > Press Save soft key.
You can pick up the handset or press Headset/Speaker button to place a call.
Dial directly: Dial number directly, then press # button;
Redial: Press Redial button to dial the latest number;
Answer directly: You can answer a call by lifting the handset, or pressing
the Speaker button;
Press MUTE button when talking, the voice will be mute on you side and
other side cannot hear what you say. If you want to resume, just press
again the mute button.
2-2
If you want to hold an active call, you can press Hold button, and resume
it by pressing again.
You can switch to other lines and hold the active call by pressing line
button of other lines, and resume it by pressing the line button of
previous line.
You can adjust the volume in different status with volume button.
Phone Status
Corresponding volume
Standby
Ring volume
Hook off
Handset volume
Hand-free
Speakerphone volume
You can adjust the corresponding microphone input volume as follow:
Log in WEB management, select “Phone setting”>”Basic setting”>”Volume
setting”.
You can invite the third party into a conference during an active call:
Press Conference button in an active call, dial the third party number, and
press Conference button again when you have connected the third party.
When the number of conference members is more than 3, you can make
more phones to join the conference and it will become a multiparty
conference.
*For more detailed information, you can refer to the corresponding User
Manual.
-----------------------------------------------------------------------------------------------
Address: Floor 4 Building C YueAn Industrial Park No.54 Huangcun Road Tianhe
District Guangzhou China
Postal Code: 510665
E-mail: support@escene.cn
http://www.escene.cn/en
2-3
  • Page 1 1
  • Page 2 2

Escene WS118 Quick operation guide

カテゴリー
電話
タイプ
Quick operation guide
このマニュアルも適しています

他の言語で