Gigabyte AORUS Gen4 5000E SSD 500GB 取扱説明書

タイプ
取扱説明書

このマニュアルも適しています

GIGABYTE Solid State Drive (SSD) - Limited Warranty
Thank you for purchasing a GIGABYTE Solid State Drive(SSD). Before using this product, please read and review
the Limited Warranty thoroughly. Your use of this product indicates that you have accepted and agreed to the terms
and conditions of this Limited Warranty statement.
GIGABYTE warrants to the original purchasers of this Product that this Product (excluding content and/or software,
if applicable, supplied with or within the Product) will be free from material defects in manufacture, conform to
GIGABYTE's published product specications, and be t for normal use during the applicable "Warranty Period"
specied below.
The "Warranty Period" referred to above is: certain years from the date of delivery of the Product, provided the
Product conforms to and is used in accordance with GIGABYTE's applicable product data sheet and product
endurance specication. Warranty period may vary by countries, please visit GIGABYTE website for more detail
information or contact with local RMA service center.
Warranty coverage requires proof of purchase documentation with evidence of the date of purchase (sales
receipt or invoice) and original packaging.
Should GIGABYTE, under its discretion, deem that the product suffers from material defects in manufacture,
GIGABYTE's sole obligation under this warranty is to replace or repair for free of charge, the defective product
or all of the product's defective parts.
If this Warranty covers a returned Product, the returned Product may be repaired or an equivalent product to the
Product may be made available by the Reseller to the original purchaser. The previous sentence describes the
sole and exclusive remedy available in the event this Warranty covers a returned Product.
These warranties are valid only for the original owner of the product. GIGABYTE will not extend their warranty
to items that are purchased secondhand. This warranty is not assignable; products purchased from secondhand
sources are not covered in the warranty by GIGABYTE. This is still true even if the product or packaging appears
sealed, advertised as new, or never used in any way. GIGABYTE only offers warranties for items sold by authorized
retailers, system builders, and distributors.
This Warranty does not cover any damage to this Product which results from accident, abuse, misuse, natural
or personal disaster, or any unauthorized disassembly, repair or modication.
A Product will be considered to have a material defect or to be materially defective only if such Product does not
meet the stated design lifetime (up to the applicable Warranty Period), is returned to the appropriate location
within the Warranty Period, and is subject to applicable performance threshold information contained in the
Product's GIGABYTE data sheet.
The original purchaser must ensure to the extent possible that all data is removed from the Product, and if it is
not the case that all data is or can be removed, the original purchaser shall indemnify, defend and hold harmless
GIGABYTE and the Reseller for any possible liabilities associated with the potential presence in the returned
Product of sensitive and/or personal data, regardless of whether this data relates to the original purchaser or
any other third party.
It is possible for a drive to be used under conditions which cause the media to wear out (and the Warranty to
expire) prior to the expiration of the stated time period in the Warranty, as specied in the applicable endurance
specication linked below.
Please check for more details on the GIGABYTE Website.
https://www.gigabyte.com/
GIGABYTE shall not be liable for (a) any incidental, indirect, special, exemplary, punitive or consequential
damages, including but not limited to loss of prots and/or loss of data, other loss, damage or expense directly
or indirectly arising from any defect or inability to use the Product or poor performance, either separately or in
combination with other equipment, regardless of whether GIGABYTE or the original purchaser has been advised
of the possibility of such damages, nor (b) any amounts in the aggregate in excess of the purchase price paid for
the applicable Product(s). GIGABYTE is not liable for and does not cover under warranty, any costs associated
with servicing and/or the installation of GIGABYTE products, including the Product.
This Warranty sets forth the entire liability and obligations of GIGABYTE with respect to defects, breach of
warranty or any other failure to perform or meet specication associated with any Products.
GIGABYTE Warranty Guidelines GIGABYTE products, including the Product, must not be used in applications
where failure could threaten injury or life, such as aviation, automotive, nuclear, medical or life support systems
(or any other form of ultra-hazardous applications), and under no circumstances shall GIGABYTE offer any
warranty or have any obligations arising from any such Product uses.
Buyer acknowledges that the goods sold by GIGABYTE are being used or incorporated into other products or
systems, and the ultimate safety of those products or systems are the sole responsibility of Buyer.
This warranty applies only on the condition that the product has been installed, maintained and operated under
conditions of normal use and in accordance with the installation guide provided herewith.
The provisions of this warranty shall not apply if, in GIGABYTE's sole judgment, the product has been subject to
misuse or neglect, improper installation, damaged in an accident, or repaired or altered in any way that affects
its performance or reliability.
Buyer assumes all risks and liabilities for use of GIGABYTE products in other products or systems. In addition,
GIGABYTE is not responsible for any archival, backup or disaster recovery services.
Disclaimer
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, TITLE, OR NON INFRINGEMENT, WHICH OTHER WARRANTIES ARE EXPRESSLY EXCLUDED AND
DISCLAIMED. GIGABYTE SHALL NOT BE LIABLE FOR LOSS OF PROFITS OR ANY SPECIAL, INCIDENTAL,
EXEMPLARY, CONSEQUENTIAL OR PUNITIVE DAMAGES WHICH PURCHASER OR THIRD PARTY MAY
SUSTAIN, EVEN IF GIGABYTE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. IN
NO EVENT SHALL GIGABYTE'S LIABILITY EXCEED THE PURCHASE PRICE OF THE DEFECTIVE PRODUCT.
WITHOUT LIMITING THE GENERALITY OF THE PRECEDING PARAGRAPH, GIGABYTE EXPRESSLY
DISCLAIMS ANY AND ALL LIABILITY FOR DIRECT, INDIRECT AND/OR CONSEQUENTIAL DAMAGES,
INCLUDING LOST PROFITS, ARISING FROM THE LOSS, CORRUPTION, ERASURE OR DESTRUCTION OF ANY
DATA STORED ON OR TRANSMITTED VIA ANY GIGABYTE PRODUCT, INCLUDING, WITHOUT LIMITATION,
THE INABILITY TO ACCESS DATA STORED ON ANY SECURE GIGABYTE PRODUCTS THAT REQUIRE A
USER-DESIGNATED PASSWORD OR CODE IF THAT PASSWORD OR CODE IS LOST, FORGOTTEN, OR
COMPROMISED. USERS HAVE THE OBLIGATION TO BACKUP ALL DATA AND PASSWORDS OR CODES.
Regulatory Notices
United States of America, Federal Communications Commission Statement
Supplier's Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Product Name: Solid State Drive
Trade Name: GIGABYTE
Model Number: AG450E1TB-G/AG450E1024-G/AG450E500G-G
Responsible Party – U.S. Contact Information: G.B .T. Inc.
Address: 17358 Railroad street, City Of Industry, CA91748
Tel.: 1-626-854-9338
Internet contact information: https://www.gigabyte.com
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules, Subpart B, Unintentional Radiators.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies
with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
European Union (EU) CE Declaration of Conformity
This device complies with the following directives: Electromagnetic Compatibility Directive 2014/30/EU, Low-voltage
Directive 2014/35/EU, RoHS directive (recast) 2011/65/EU & the 2015/863 Statement. This product has been tested and
found to comply with all essential requirements of the Directives.
European Union (EU) RoHS (recast) Directive 2011/65/EU & the European Commission Delegated Directive (EU)
2015/863 Statement
GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE, PBB, DEHP,
BBP, DBP and DIBP). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at
GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals.
European Union (EU) Community Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2012/19/EU WEEE (Waste Electrical and Electronic
Equipment) (recast) directive. The WEEE Directive species the treatment, collection, recycling and disposal of electric and
electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and
disposed of properly.
WEEE Symbol Statement
The symbol shown below is on the product or on its packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal procedure.
For more information about where you can drop off your waste equipment for recycling, please contact your
local government ofce, your household waste disposal service or where you purchased the product for
details of environmentally safe recycling.
End of Life Directives-Recycling
The symbol shown below is on the product or on its packaging, which indicates that this product must not be
disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation
of the treatment, collection, recycling and disposal procedure.
Déclaration de Conformité aux Directives de l'Union européenne (UE)
Cet appareil portant la marque CE est conforme aux directives de l’UE suivantes: directive Compatibilité Electromagnétique
2014/30/UE, directive Basse Tension 2014/35/UE et directive RoHS II 2011/65/UE & la déclaration 2015/863.
La conformité à ces directives est évaluée sur la base des normes européennes harmonisées applicables.
European Union (EU) CE-Konformitätserklärung
Dieses Produkte mit CE-Kennzeichnung erfüllen folgenden EU-Richtlinien: EMV-Richtlinie 2014/30/EU,
Niederspannungsrichtlinie 2014/30/EU, Ökodesign-Richtlinie 2009/125/EC, RoHS-Richtlinie 2011/65/EU erfüllt und
die 2015/863 Erklärung. Die Konformität mit diesen Richtlinien wird unter Verwendung der entsprechenden Standards
zurEuropäischen Normierung beurteilt.
CE declaração de conformidade
Este produto com a marcão CE estão em conformidade com das seguintes Diretivas UE: Diretiva Baixa Tensão 2014/35/
EU; Diretiva CEM 2014/30/EU; Diretiva Concão Ecológica 2009/125/CE; Diretiva RSP 2011/65/UE e a declarão
2015/863. A conformidade com estas diretivas é vericada utilizando as normas europeias harmonizadas.
CE Declaración de conformidad
Este producto que llevan la marca CE cumplen con las siguientes Directivas de la Unión Europea: Directiva EMC (2014/30/
EU), Directiva de bajo voltaje (2014/35/EU), Directiva de Ecodiseño (2009/125/EC), Directiva RoHS (recast) (2011/65/EU) y
la Declaración 2015/863. El cumplimiento de estas directivas se evalúa mediante las normas europeas armonizadas.
Contact point for EU based customers
G.B.T. Technology Trading GmbH
Am Stadtrand 63, 22047 Hamburg, Deutschland
tel: +49-40-25 33 040
12WE6-AGSSD-11AR
Solid State Drives (SSD) Quick Installation Guide
Installation Guide
Follow the steps below to correctly install an M.2 SSD
in the M.2 connector.
Step 1:
Use a screw driver to unfasten the screw and nut
from the motherboard. Locate the proper mounting
hole for the M.2 SSD to be installed and then screw
the nut rst.
Step 2:
Slide the M.2 SSD into the connector at an angle.
Step 3:
Press the M.2 SSD down and then secure it with
the screw.
Step 4:
The installation is completed, as shown in the
picture above.
* On the motherboard there are three length
adjustment holes for the M.2 SSD. Select the proper
hole for the M.2 SSD to be installed and refasten
the screw and nut.
English
Installations Handbuch
Führen Sie bitte die nachfolgenden Schritte aus, damit die
M.2 einwandfrei im M.2 Anschluss installiert werden kann
Schritt 1:
Benutzen Sie einen Schraubendreher um die Schraube
und Mutter vom Mainboard zu sen. Suchen die das
passende Montage Loch damit die M.2 SSD installiert
werden kann und ziehen Sie dann zuerst die Mutter fest.
Schritt 2:
Schieben Sie die M.2 SSD in einem Winkel in den
Anschluss
Schritt 3:
Drücken Sie die M.2 SSD herunter und sichern Sie sie
mit der Schraube
Schritt 4:
Die Installation ist vollständig und sollte aussehen wie auf
dem oben gezeigten Bild.
* Auf dem Mainboard benden sich r 3 verschiedene
Längeneinstelllöcher für die M.2 SSD. Wählen Sie das
richtige Loch für die zu installierende M.2 SDD aus und
ziehen Sie die Schraube und die Mutter wieder an.
Deutsch
M.2 SSD M.2
M.2 SSD
M.2 SSD
M.2 SSD
* 3
M.2 SSD
Guía de Instalación
Siga los pasos debajo para instalar correctamente un
SSD M.2 en el conector M.2.
Paso 1:
Use un destornillador para soltar el tornillo y la tuerca
de la placa base. Ubique el agujero correcto para
montaje del SSD M.2 que se instalará y atornille la
tuerca primero.
Paso 2:
Deslice el SSD M.2 al conector en el ángulo correcto.
Paso 3:
Presione la SSD M.2 hacia abajo y luego asegúrela
con el tornillo.
Paso 4:
La instalación escompletada, como se muestra en
la imagen de arriba.
* En la placa base hay tres oricios de ajuste de longitud
para el SSD M.2. Seleccione el oricio adecuado para
el SSD M.2 a instalar y vuelva a ajustar el tornillo y la
tuerca.
Español
설치 명서
M.2 SSD M.2 슬롯에 올바르게 치하 위하
아래의 계를 따라 주십시오.
1:
드라이버를 이용하여 메인 드의 M.2 슬롯
사와 풀어 주십시오. M.2 SSD 길이
너트 메인 보드 정시.
2:
M.2 SSD M.2 슬롯에 비스듬 습니.
3:
M.2 SSD 아래로 누른 상태에서 사를 감아
줍니.
4:
림처 설치 완료 었습니다.
* 보드에는 M.2 SSD 따라
가능한 구멍 개가 있습. M.2 SSD
이에 알맞 조정 택한
사와 .
한국어
Guia de Instalação
Siga os passos abaixo para instalar corretamente um
SSD M.2 no conector M.2
Passo 1:
Use uma chave philips para soltar o parafuso e porca da
placa-mãe. Localize o orifício correto para montagem
do SSD M.2 a ser instalado e, em seguida, aperte a
porca primeiro
Passo 2:
Deslize o SSD M.2 no conector usando o ângulo correto
Passo 3:
Pressione o SSD M.2 para baixo e prenda-o com
o parafuso
Passo 4:
A instalação está completa, conforme demonstrado
na gura acima
* Na placa-mãe há três furos de ajuste de comprimento
para o M.2 SSD. Selecione o orifício apropriado para
o M.2 SSD a ser instalado e volte a apertar o parafuso
e a porca.
Português
M.2 M.2 SSD
1
2
M.2 SSD
3
M.2 SSD
4
* M.2 SSD 3
M.2 SSD
M.2 SSD M.2
M.2 SSD
M.2 SSD
M .2 SSD
* 3 M.2
SSD
Инструкция по установке
Для того, чтобы корректно подключить M.2 SSD-
накопитель к соответствующему разъему, следуйте
предписаниям инструкции
Шаг 1:
C помощью отвертки удалите винт, а затем втулку с
резьбой, которая установлена на материнской плате.
Определите подходящее монтажное отверстие
для установке выбранного M.2 SSD-накопителя и
установите в него втулку с резьбой.
Шаг 2:
Ус тановите M.2 SSD -накопи тель в ра зъем под углом.
Шаг 3:
Прижмите M.2 SSD-накопитель ко втулке и закрепите
его винтом.
Шаг 4:
Процедура инсталляции завершена, как показано
на рисунке выше.
* На материнской плате расположены три монтажных
отверстия для установки M.2 SSD-накопителя.
Определите подходящее отверстие для установки
выбранного M.2 SSD-накопителя, установите на
плату втулку с резьбой и закрутите винт.
Русский
BSMI CNS15663 限用物質含有情況標示聲明書
Declaraon of the Presence Condion of the Restricted Substances Marking
設備名稱:Solid State Drive 型號(型式) AG450E1TB-G/AG450E1024-G/
AG450E500G-G
Equipment name Type designaon (Type)
單元Unit
限用物質及其化學符號
Restricted substances and its chemical symbols
Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
印刷電路板總
PCB Assembly
晶片
Chip
散熱片
Heat Sink
連接器 (計選配)
Connectors (Design opons)
其他塑膠組件 (設計選配)
Other plasc components
(Design opons)
備考1. "超出0.1 wt %" "超出0.01 wt %" 係指限用物質之百分比含量超出百分比含量基準值。
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted
substance exceeds the reference percentage value of presence condion.
備考2. "" 係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2: "" indicates that the percentage content of the restricted substance does not exceed the percentage of
reference value of presence.
備考3. " " 係指該項限用物質為排除項目。
Note 3: The " " indicates that the restricted substance corresponds to the exempon.
关于符合中国《电器电子产品有害物质限制使用管理办法》的声明
Administrave Measures for the Restricted Use of Hazardous Substances in Electrical and Electronic Products
(China RoHS Declaraon)
产品中有害物质的名称及含量
Hazardous Substances Table
部件名称(Parts)
有害物质(Hazardous Substances)
(Pb)
(Hg)
(Cd)
六价铬
(Cr+6)
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板总成
PCB Assembly × ○ ○
芯片
Chip ○ ○ ○
散热片
Heat Sink ○ ○ ○
连接器 (设计选配)
Connectors (Design opons)
○ ○ ○
其他塑胶组件 (设计选配)
Other plasc components
(Design opons)
○ ○ ○
These tables are prepared in accordance with the provisions of SJT 11364
本表格依据SJ/T 11364 的规定编制。
The content of such hazardous substance in all homogeneous materials of such component is below the limit
required by GB/T 26572.
表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
× The content of such hazardous substance in a certain homogeneous material of such component is beyond the
limit required by GB/T 26572.
表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定的限量要求。
D33006
RoHS
  • Page 1 1
  • Page 2 2

Gigabyte AORUS Gen4 5000E SSD 500GB 取扱説明書

タイプ
取扱説明書
このマニュアルも適しています