3 4 52
1
8 7
6
9
–1
(1) (2)
APS-C
A 35mm
E
E
1
2
1 2 3
4 5 6
7 8 9
(
–
)
1
(1) (2) 2
(2)
2
(
–
)
)
( )
35mm
*
1
(mm)
*
1
*
2
(m)
( )
(mm)
(mm)
(g)
DT 16-105mm
F3.5-5.6
(SAL16105)
24-157.5 11-15 83 -15 0.4 0.23 F22-36 62 72 83 470
*
1
35mm APS-C
*
2
ADI ADI
(1) (1) (1) (1)
Names of parts
1···Lens hood index 2···Focusing ring 3···Distance index 4···Focal-length index
5···Focal-length scale 6···Lens contacts 7···Mounting index 8···Zooming ring
9···Distance scale
Attaching/detaching the lens
To attach the lens (See illustration
–
.)
1
Remove the rear and front lens caps and the camera body
cap.
You can attach/detach the lens front cap in two ways, (1) and (2). When you
attach/detach the lens cap with the lens hood attached, use method (2).
2
Align the orange index on the lens barrel with the orange
index on the camera (mounting index), then insert the
lens into the camera mount and rotate it clockwise until it
locks.
Do not press the lens release button on the camera when mounting the lens.
Do not mount the lens at an angle.
To remove the lens (See illustration
–
.)
While pressing and holding the lens release button on the
camera, rotate the lens counterclockwise until it stops, then
detach the lens.
Attaching lens hood
It is recommended that you use a lens hood to reduce flare and ensure
maximum image quality.
Align the red line on the lens hood with the red half dot on
the lens (Lens hood index). Turn the hood clockwise until the
red half dot on the lens meets the red dot on the hood and it
clicks into place.
Attach the lens hood properly. Otherwise, the lens hood may interfere with the
desired effect or may appear in pictures.
When storing, turn over the lens hood and place it onto the lens backwards.
Zooming
Rotate the zooming ring to the desired focal length.
Focusing
When using the auto focus, the camera focuses the lens automatically.
Even when the auto focus is set, the focusing ring may rotate if you move it
unintentionally. Only rotate the focusing ring manually when the camera is set to
the direct manual focus, otherwise a malfunction may result. (Some cameras do
not have the direct manual focus function. If your camera has this function, this
restriction is explained in the section on focusing, in your camera’s instruction
manual.)
When focusing manually, set your camera to the manual focus and rotate the
focusing ring while looking through the viewfinder, etc.
Specifications
Name
(Model name)
Equivalent
35mm-format
focal length*
1
(mm)
Lens groups-
elements
Angle of
view*
1
Minimum
focus*
2
(m (feet))
Maximum
magnification
(×)
Minimum
f-stop
Filter
diameter
(mm)
Dimensions
(maximum
diameter × height)
(mm (in.))
Mass
(g (oz.))
DT 16-105mm
F3.5-5.6
(SAL16105)
24-157.5 11-15 83°-15° 0.4 (1.3) 0.23 f/22-36 62
Approx. 72×83
(2 7/8×3 3/8)
Approx. 470
(16 9/16)
*
1
The values for equivalent 35mm-format focal length and angle of view are based on Interchangeable Lens Digital Cameras equipped with an APS-C sized image sensor.
*
2
Minimum focus is the distance from the image sensor to the subject.
This lens is equipped with a distance encoder. The distance encoder allows more accurate measurement (ADI) by employing a flash for the process.
Depending on the lens mechanism, the focal length may change with any change of the shooting distance. The focal length assumes the lens is focused at infinity.
Included items: Lens (1), Lens front cap (1), Lens rear cap (1), Lens hood (1), Set of printed documentation
Designs and specifications are subject to change without notice.
is a trademark of Sony Corporation.
Company names and company product names are trademarks or registered trademarks of those companies.
–2
English
You will find information on using each lens in this manual. Precautions
common to lenses, such as notes on use will be found in “Precautions
before using” on a separate sheet. Be sure to read both documents before
using the lens.
This lens is designed for A-mount which can be used on Sony
α
cameras
(models equipped with APSC sized image sensor). You cannot use on 35mm-
format cameras.
Notes on use
When using this lens with an E-mount camera, attach a separately sold Mount
Adaptor. Do not attach the lens directly to the E-mount camera or you may
damage both.
When you carry the camera with the lens attached, make sure to hold both the
camera and the lens steadily.
Do not hold by any part of the lens that protrudes when zooming.
Precautions for flash use
When using a built-in camera flash, make sure to remove the lens hood and
shoot from at least 1 m (3.3 feet) away from your subject. With certain of lens/
flash combinations, the lens may partially block the light of the flash, resulting in
a shadow at the bottom of the picture.
When a built-in camera flash is used, the corners of the screen may appear darker
at wide-angle position. Check the focal length according to the built-in flash on
your camera.
Vignetting
When you use lens, the corners of the screen become darker than the center.
To reduce this phenomena (called vignetting), close the aperture by 1 to 2
stops.
4-261-632-03(1)
©2007 Sony Corporation
SAL16105
DT 16-105mm F3.5-5.6
/Operating Instructions/Mode d'emploi/Manual de
instrucciones/
/
Interchangeable Lens/
Objectif interchangeable/
A-mount
Printed in Japan
ページが読み込まれています...
-
1
-
2
他の言語で
- español: Sony SAL16105 Guía del usuario
- français: Sony SAL16105 Mode d'emploi
- English: Sony SAL16105 User guide