Denso PR-700UDM ユーザーマニュアル

Contactless IC Card Reader/Writer

PR-700UDM

Operator’s Guide

This manual instructs how to use the PR-700UDM and describes the connection method with a

host computer.

Please read this manual carefully before using the product and keep it for future reference.

For more details on using PR-700UDM, see the User’s Manual that is available as a free

download from our website “QBdirect” at http://www.qbdirect.net. Before downloading, you are

requested to register as a member (free of charge).

The device comes under strategic materials regulated by the Foreign Exchange and Foreign

Trade Act. When the device is required to be exported abroad, an export permit based on this

Act is required from the Japanese Government. Please contact sales for the details.

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.



Please READ through these instructions carefully. They will enable you to use the device

correctly.



Always keep this manual nearby for reference.

Strict observance of these warnings and cautions is a MUST for preventing accidents that could

result in bodily injury and substantial property damage. Make sure you fully understand all

definitions of these terms and symbols given below before you proceed to the text itself.

Alerts you to those conditions that could cause serious bodily

injury or death if the instructions are not followed correctly.

Alerts you to those conditions that could cause minor bodily injury

or substantial property damage if the instructions are not followed

correctly.

Meaning of Symbols

A diagonal line through a circle (

) warns you of something you should not do; it may

or may not have a picture inside. Here you see a screwdriver inside the circle, meaning

that you should not disassemble.

A black circle (

) with a picture inside alerts you to something you MUST do. This

example shows that you MUST unplug the power cord.

MEMO

To System Designers



When introducing the PR-700UDM in those systems that could affect

human lives (e.g., medicines management system), develop applications

carefully through redundancy and safety design which avoids the feasibility

of affecting human lives even if a data error occurs.

Implantable Medical Equipment:



A patient with implantable medical equipment (cardiac pacemaker, etc.) is

strongly advised to operate the PR-700UDM at least 12 cm away from the

said medical equipment. A survey conducted on the wireless card systems

has reported the possibility of their affecting or giving unfavorable impact

on implantable medical equipment.

This is a general characteristic of those systems using radio waves, and not

a unique feature of DENSO WAVE's products or the PR-700UDM itself.

Improper handling of the product against these warning precautions could result in

overheating,

smoke, or malfunction. Be sure to observe the following when using this product.



Do not contact metal objects with the terminal.

Doing so could produce a large current through the product, resulting in heat

or fire, as well as damage to the product.



Do not use the voltages other than power voltage specified.

Doing so could cause the product to break or burn.



Do not use the product in the presence of inflammable gases.

Doing so could cause fire or electrical shock.



Do not use the product in places subject to strong vibration or shock.

Doing so could cause the product to break or burn.



Do not use the product in places where the use of radio waves is restricted,

such as on airplanes or in hospitals.

Doing so may cause failure or malfunction in electronic or medical equipment.



Do not scratch or modify the product or the USB cable. Do not heat, bend, twist

or pull the USB cable.

Doing so could break the product or the USB cable, resulting in fire.



Do not drop or apply force to the product.

Doing so could cause the device to malfunction.



Do not use the product in places where it is subject to sharp temperature

changes, dewing or steam.

Doing so could cause fire or electric shock.



Avoid spilling liquid such as soft drink, coffee or water on the product.

Doing so could cause fire or electric shock.



If the USB cable is damaged (e.g. exposed or broken lead wires), stop using it

and contact your nearest dealer.

Failure to do so could result in fire or electrical shock.



If smoke, abnormal orders or noises come from the product, immediately turn

off the host computer, unplug the USB cable, and contact your nearest

dealer.

Failure to do so could result in fire or electrical shock.



If foreign material or water enters the product, immediately turn off the host

computer, unplug the USB cable, and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.



If the product does not function correctly or the housing is damaged, turn off

the host computer, unplug the USB cable, and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

Improper handling of the product against these warning precautions could result in overheating,

smoke, or malfunction. Be sure to observe the following when using this product.



Never disassemble or modify the product.

Doing so could result in fire or electrical shock.



Never leave the product in places where there are excessively high

temperatures, such as inside unventilated automobiles, or in places

exposed to direct sunlight.

Doing so could affect the housing or parts, resulting in fire.



Avoid using the product in areas of extremely humidity or drastic temperature

changes.

Moisture may enter the product, resulting in malfunction, fire or electrical

shock.



Do not place the product in places where it may be subject to oily smoke or

steam such as near a cooking range or humidifier.

Doing so could result in fire or electrical shock.



Never cover or wrap the product in a cloth or blanket.

Doing so could cause the product to overheat, deforming its housing,

resulting in fire. Always use the product in a well-ventilated area.



Do not cover the USB cable or allow it to become trapped under heavy

objects.



Do not use the product if your hands are wet or damp.

Doing so could result in electrical shock.



Never use organic cleaners or chemicals such as benzene and thinner to

clean the housing. Do not apply insecticide to the product.

Doing so could result in damage to the housing, electrical shock or fire.



Do not use the product with anti-slip gloves containing plasticizer.

The housing may be broken, causing injuries, electrical shock, or fire.



Do not operate the product in close proximity to electronic equipment such as

a mobile phones, PHS, TV or radio.

Doing so could cause noise in the sound or display due to electromagnetic

waves generated by the product.



Make sure to hold the plug when connecting and disconnecting the USB

cable.

Failure to do so could fracture the inner wires, burn the product, or cause fire

or electric shock.

MEMO



Chapter 1 Packing List and Names and functions

Packing list

This package contain the following list

- PR-700UDM :1

- Cradle :1

- USB Cable :1

- Operator’s guide( this sheet) :1

Names and functions

IC card reader panel

USB connector

A USB cable with the device

LED

Cradle

Chapter 2 Preparation

Operating Environment for PR-700UDM

PR-700UDM is a contactless IC card reader/writer that communicates with a contactless IC card

through a host computer. MIFARE, FeliCa, ISO/IEC 14443 TypeA, TypeB are supported. Using

the PR-700UDM requires a host computer with a USB Port.

A USB-COM interface is required to connect the PR-700UDM with a host computer. To use this

interface, you need to install the dedicated Active USB-COM driver (virtual COM port driver) to a

host computer. This interface allows you to use the device in applications using the conventional

serial port.

Interface USB-COM

Host computer DOS/V with a USB port conforming to USB1.1

Operating System

OS

Windows XP (32bit)

Windows Vista (32bit)

Windows 7 (32bit/64bit)

Windows 8 32bit/64bit

USB driver Active USB-COM port driver

provided by DENSO WAVE *

* It can be downloaded for free from our website at: http://www.qbdirect.net



Chapter 3 Connecting the USB interface cable

The PR-700UDM receives and sends data from/to the host computer through the USB-COM

interface. Install the USB-COM Interface driver before connecting the USB interface cable.

(Refer to Sections 3.2 and 3.3)

Notes for connecting the USB interface cable



To use the USB-COM interface, install a serial port driver to the host computer before

connection of the USB interface cable.



When plugging and unplugging a USB device, allow an interval of at least 10 seconds,

which is required to add or delete the USB device.



When a host computer is processing connection with the reader/writer, do not hot plug or

unplug any other USB devices.



Directly connect the reader/writer to the USB port on the host computer or to the

self-powered hub. Be aware that certain hubs may not be compatible with the

reader/writer. If the operation is unstable with a hub, unplug the reader/writer from the hub

and connect it directly to any USB port on the host computer.



Do not use an additional extension cable.



The reader/writer may not operate properly even if the requirement is met. It depends

on the hardware and software configuration.



Operation is not guaranteed on all computers that meet the conditions of the

recommended operating environment.



The reader/writer may not work properly with some computers on standby or

hibernation.



The reader/writer may not work properly with some power environments.

1. Place the PR-700UDM on the

cradle.

3. Use the USB interface cable to connect

to a host computer.

2. Install the USB-COM interface driver.

Chapter 4 How to place an IC card

Place an IC card to the reader panel in the same sideways direction as the PR-700UDM.

The PR-700UDM reads one card at a time. Do not apply multiple cards to the panel at the same

time.

A host computer reads card data with commands and return responses.

Note: Do not place a card vertically or on the skew as shown below. Such cards may not be

read correctly.

Do not unplug the USB cable while the application for the PR-700UDM is operating.

Doing so could make a host computer unstable or damage data in the PR-700UDM.

ページが読み込まれています...

Denso PR-700UDM ユーザーマニュアル

このマニュアルも適しています

Denso PR-700UDM ユーザーマニュアル

他の言語で

関連論文

その他のドキュメント